HP LaserJet Pro P1102w Driver Download

The HP LaserJet Pro P1102w has been around since 2010, which means two things for driver install today. HP still hosts a Full Feature package that officially covers Windows 10 and earlier, plus a dedicated macOS driver that stretches back to Mac OS X Leopard. So the files you need exist. What’s less obvious is which of the Windows packages you actually want, how the Windows 11 install trips up on a model this old, and why the installer dialogs say “LaserJet Professional” instead of “Pro.”

This page has every download for the P1102w, plus the install flow I use when I set one of these up on a newer Windows machine. I’ve also added notes on the manual port workaround that resolves most Windows 11 install failures, and what the three LED lights on the printer are trying to tell you.

Which driver do I need for the LaserJet Pro P1102w?

On Windows you have a few options, and the right pick depends on what you want from the printer. The Full Feature Drivers and Software is the standard package. It covers Windows 11 down to XP and installs everything — the driver, the HP status utility, and the install wizard. For most people this is the right pick, and it’s what HP labels as recommended.

The Hostbased Basic Driver is a lightweight alternative for users who want just the print function without HP utilities. It comes in 32-bit and 64-bit flavors and targets Windows 7 through 8.1. The XPS Print Driver is a separate package aimed at Windows 7, Vista, and XP where a 16-bit print signal matters for specific workflows.

The ePrint Software adds HP’s cloud print service, which lets the P1102w accept print jobs over the internet via a unique email address. It’s a separate download for Windows 10, 8.1, 8, and 7 — grab it only if cloud printing fits your workflow.

On macOS, HP splits the driver by era. The Printer Driver for OS X 10.9 to macOS 12 is the current package. HP Easy Start handles setup on macOS Big Sur 11. The older Printer Driver covers OS X 10.7 and 10.8, and the Full Feature package reaches back to Mac OS X Leopard. I recommend starting with HP Easy Start on recent Macs — it fetches the right driver automatically.

HP LaserJet Pro P1102w Drivers for Windows

🖥️Supported Operating Systems

Windows

Windows11, 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit; XP 64-bit limited)

macOS

macOS10.5 through 12 Monterey (Mac OS X Leopard to macOS Monterey)

Linux

LinuxCovered by HPLIP (HP Linux Imaging and Printing)

Hostbased Basic Driver (64-bit)

Windows 8.1, 8, 7, Vista, XP (64-bit)

4.71 MBDownload

Hostbased Basic Driver (32-bit)

Windows 8.1, 8, 7, Vista, XP (32-bit)

4.01 MBDownload

XPS Print Driver (64-bit)

Windows 7, Vista, XP (64-bit)

4.2 MBDownload

XPS Print Driver (32-bit)

Windows 7, Vista, XP (32-bit)

4.2 MBDownload

ePrint Software (64-bit)

Windows 10, 8.1, 8, 7 (64-bit) — Network and Wireless

32.7 MBDownload

ePrint Software (32-bit)

Windows 10, 8.1, 8, 7 (32-bit) — Network and Wireless

27.5 MBDownload

HP LaserJet Pro P1102w Drivers for macOS

HP Easy Start

macOS Big Sur 11 — setup utility

9.06 MBDownload

ePrint Software

OS X 10.8 to macOS 10.12 — Network and Wireless

6.61 MBDownload

Printer Driver (Legacy)

OS X 10.7 and 10.8

573.86 MBDownload

Full Feature Drivers and Software (Classic)

Mac OS X 10.5 to 10.7

143.7 MBDownload

Before you install

A few things to line up so the install runs clean the first time.

  • Sign in with a Windows account that has administrator rights. The installer prompts for elevation and will stop if it can’t get it.
  • On a Mac, make sure your account can approve a system extension prompt (admin password handy).
  • Connect the power cable and plug the P1102w into a wall outlet. Don’t power it on yet. The installer will tell you when to turn it on and connect the USB cable.
  • Decide whether you’re installing over USB or Wi-Fi. Both work, but the installer asks early and the flows diverge from there.
  • Close any open print app and any previous HP utility. The installer can’t replace a driver that’s in use.
  • Pull the orange tape off the toner cartridge and the shipping locks off the paper tray before you start. The printer won’t initialize with them in place.

Install the LaserJet Pro P1102w driver step by step

Click the download link next to the Full Feature Drivers and Software in the Driver files section above and save the installer to your Downloads folder. On Windows the file is a self-extracting EXE. On macOS it’s a DMG that mounts a package installer.

Walk through the installer:

  1. Right-click the downloaded file and pick Run as administrator (Windows) or double-click the DMG and open the package (Mac).
  2. Accept the license agreement when the first screen asks.
  3. Pick your connection method when the installer asks. Choose USB or Wireless.
  4. When the wizard asks for the model, pick the P1102w from the list. HP’s installer labels the series as “LaserJet Professional P1100” — that’s HP’s older branding for the same product line, so it’s the right pick for the Pro P1102w.
  5. If you picked USB, connect the printer to your Mac or PC with a USB cable and turn it on when the installer tells you to. If you picked wireless, make sure the printer and your computer are on the same 2.4 GHz Wi-Fi network before you continue.
  6. Let the installer finish. HP’s package can take five or six minutes to complete, and there’s no progress bar during the quiet stretch in the middle.
  7. Print a test page from the driver properties dialog once install completes.

Install the ePrint Software separately after the main driver is in, if cloud printing fits your workflow.

What to check after install

  • Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The HP LaserJet Pro P1102w should appear in the list.
  • Print a test page from the printer properties dialog. If the page comes out blank, check that the toner cartridge is seated correctly and the orange shipping tape is fully removed.
  • In your usual app, open the print dialog and verify that the P1102w is selectable and that paper size options include your common formats.
  • Check the three LEDs on top of the printer: the Ready light should be solid green. If the Attention light is on or blinking, check the Known issues section below for what the pattern means.

Print from your phone or tablet

The P1102w supports AirPrint on iPhone and iPad, which means you can print directly from Photos, Mail, Safari, or any iOS app with a Share sheet. Make sure the P1102w and the iPhone are on the same Wi-Fi network — the printer runs on 2.4 GHz only, so if your phone sits on 5 GHz, you’ll need to switch it temporarily.

For Android, the HP Smart app handles setup and basic printing. Download it from Google Play, point it at your P1102w on the same Wi-Fi network, and it picks the printer up. Mopria Print Service is another option for Android devices that support it.

If you installed the ePrint Software on a desktop, you can also assign the P1102w a cloud email address and send print jobs to it from anywhere by emailing the document to that address.

If install fails

Windows 11 is where most install trouble lands on this printer, because HP doesn’t officially list Windows 11 support for the P1102w. The workarounds below cover the common failure modes, in the order I’d try them.

  • Installer closes silently or won’t finish on Windows 11. Run the installer through Windows compatibility mode. Right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for”. Try Windows 10 first, since that’s HP’s newest officially supported Windows for this model. If it still fails, step down to Windows 8, then Windows 7 as a last resort. Save after each change and run the installer as administrator each time.
  • Add the printer through Windows directly on Windows 11. An HP support employee on the HP Support Community thread describes a manual port workaround. Open Settings > Bluetooth & devices > Printers & scanners, click Add device, pick The printer that I want isn’t listed, then Add a local printer or network printer with manual settings, pick an existing port (USB001 or DOT4_001), and select the P1102w from the driver list. If it’s not listed, click Windows Update to refresh the catalog.
  • HP Smart app from the Microsoft Store. HP Smart sometimes detects legacy printers that the Full Feature installer can’t configure on Windows 11. Install it from the Microsoft Store and run its setup wizard.
  • Printer not detected over USB. Try a different USB port, prefer a direct port on the computer over a hub, and swap the cable if you have a spare. Confirm that the Ready LED on the printer is lit before clicking Next in the installer.
  • Previous HP driver stuck. Open Settings > Printers & scanners, remove any older P1102w entries, then open Apps > Installed apps and uninstall any HP utility tied to the P1102w. Reboot, then rerun the installer.
  • Wireless install can’t find the printer. The P1102w uses 2.4 GHz Wi-Fi only. If your router runs band steering and parks your PC on 5 GHz, either temporarily disable band steering or connect your PC to the 2.4 GHz SSID for setup. Both devices need to be on the same network and the same 2.4 GHz band.
  • Last resort: HP Print and Scan Doctor. HP’s diagnostic utility (HPSD) runs through common install and connection problems automatically. Download it from HP’s support site and run it against the P1102w.

Known issues with the LaserJet Pro P1102w

Windows 11 is not an officially supported OS. HP’s driver listing stops at Windows 10 for this model, and community reports on the HP Support Community point to install failures where the Full Feature package won’t complete on Windows 11. The manual port workaround above resolves most of these, and HP Smart from the Microsoft Store is a reliable fallback.

The installer labels the model as “LaserJet Professional.” HP rebranded the LaserJet Professional lineup to LaserJet Pro years ago, but the P1102w installer still uses the older naming in its model-selection screen. It’s the correct driver — just pick the P1100 series and then the P1102w variant when the wizard prompts you.

Microsoft legacy printer framework phase-out. Microsoft is phasing out the printer driver frameworks that older models like the P1102w rely on, so previously working drivers may stop functioning after a Windows 11 feature update. If HP’s driver fails after an update, add the printer using Windows’ built-in generic IPP class driver instead: Settings > Printers & scanners > Add device > “The printer that I want isn’t listed” > Add a printer using a TCP/IP address, then pick IPP as the protocol. Basic printing works, though you lose HP’s status utility.

Wireless on 2.4 GHz only. The P1102w’s 802.11 b/g/n radio doesn’t support 5 GHz. On modern routers that default to band steering, the PC and printer can end up on different bands, which blocks discovery. Pick a Wi-Fi network that exposes the 2.4 GHz SSID separately, or disable band steering for setup.

No Ethernet port. The P1102w has USB and Wi-Fi only. If you need a wired network connection, the P1102w isn’t the right pick — the newer HP LaserJet Pro M15w and M29w have similar form factors but still no Ethernet; you’d need to step up to an M203 or similar for wired network support.

How to fully uninstall the LaserJet Pro P1102w driver

On Windows:

  1. Open Settings > Printers & scanners and remove the HP LaserJet Pro P1102w entry.
  2. Open Settings > Apps > Installed apps and uninstall HP LaserJet Pro P1102w, HP Status Solutions Center, and anything else with “LaserJet Pro P1102w” in the name.
  3. Reboot.
  4. For a true clean wipe before a fresh install, open Driver Store Explorer (RAPR), filter by HP, and remove the P1102w driver package from the Windows driver store.

On macOS:

  1. Open System Settings > Printers & Scanners and remove the P1102w.
  2. Mount the original HP Printer Driver DMG you used to install and run the Uninstaller package inside it. If you don’t have the DMG anymore, HP’s driver files live under /Library/Printers/hp/ and can be removed manually.
  3. Restart the Mac.

HP LaserJet Pro P1102w at a glance

Spec Value
Release year 2010
Print technology Monochrome laser
Maximum resolution 600 x 600 dpi (FastRes 1200)
Print speed Up to 19 pages per minute (A4)
Maximum paper size Legal
Supported paper sizes A4, Letter, Legal, envelopes, labels
Connections USB 2.0, Wi-Fi (802.11 b/g/n, 2.4 GHz only). No Ethernet.
Mobile printing AirPrint (iOS), HP Smart app (Android), HP ePrint (cloud), Mopria
Windows support Officially 10 and earlier; 11 via workaround
macOS support 10.5 through 12 Monterey
Linux support Yes, via HPLIP package
Toner cartridge HP 85A (CE285A)
Weight About 5.2 kg (11.5 lb)

Frequently Asked Questions

How do I download the HP LaserJet P1102w drivers for Windows 11?

Scroll up to the Driver files section on this page. Download the Full Feature Drivers and Software package (157.36 MB) — that’s HP’s recommended driver, and it covers Windows 11 through XP. HP doesn’t officially list Windows 11 support, so if the installer fails, run it in Windows 10 compatibility mode first, then try the manual port workaround described in the “If install fails” section above.

How do I install the HP LaserJet P1102w driver?

Download the Full Feature Drivers and Software from the Driver files section above, right-click the EXE, and pick Run as administrator. Accept the license, pick USB or wireless connection, select the P1102w from the model list when prompted, and connect the printer when the installer tells you to. The full flow typically takes five or six minutes.

Is the HP LaserJet P1102w discontinued?

The P1102w is legacy status. HP still lists it on their shop, and drivers are still available for download, but the product is over a decade old and HP’s newer compact wireless lasers (LaserJet M15w, M29w) have replaced it in the current lineup. Expect driver support to taper off over time as Microsoft continues to retire legacy printer frameworks in Windows 11.

How do I connect my HP LaserJet P1102w printer to my computer?

Two options. For USB, run the Full Feature installer and connect the USB cable when the wizard asks — the installer walks you through the rest. For wireless, run the installer, pick Wireless when it asks for connection method, and confirm that your PC is on the 2.4 GHz band of your Wi-Fi network (the P1102w doesn’t support 5 GHz). The Wireless button on top of the printer flashes while it connects.

Is the LaserJet Pro P1102w driver free to download?

Yes. All P1102w driver files are free. No signup, no payment, no account required.

Does the P1102w work on macOS Monterey or newer?

HP’s dedicated macOS driver officially covers macOS 12 Monterey as the newest version. On macOS Ventura 13 and Sonoma 14, basic printing still works through AirPrint, but HP doesn’t publish a native driver for those versions, so you lose HP-specific features like the status utility.

How do I uninstall the P1102w driver completely?

On Windows, remove the printer from Settings > Printers & scanners, then uninstall the HP utilities tied to the P1102w from Apps > Installed apps, and reboot. For a deeper wipe, Driver Store Explorer (RAPR) removes the driver package from the Windows driver store. On macOS, remove the printer from System Settings > Printers & Scanners and run the Uninstaller package from the original HP Printer Driver DMG.