HP LaserJet Pro 400 M401n Driver Download

The HP LaserJet Pro 400 M401n is a compact business monochrome laser printer from 2012 — print-only, no scanner or fax, no Wi-Fi, no automatic duplex. The “n” in M401n stands for Network: this variant has Gigabit Ethernet and USB, but not wireless and not duplex (those are the d and w suffixes on sibling M401d, M401dn, M401dw models). It prints at 33 pages per minute at 1200 x 1200 dpi, uses HP’s CF280A and CF280X toner cartridges, and ships with a small 3-line monochrome LCD. Driver support covers Windows 11 all the way back to Windows XP and Mac OS X Leopard 10.5 through macOS Ventura 13.

HP discontinued the M401 series around 2017 when the newer LaserJet Pro M402 line launched, but driver support continues. This page has every current HP driver for the M401n — an unusually wide Windows matrix with 13 separate driver variants covering consumer Full Solution, slim PCL 6, enterprise Universal Print Drivers in PCL6 and PostScript flavors, and USB-only variants for scripted deployments — plus the macOS install path and honest notes on the printer’s 2012-era limitations.

🖥️Supported Operating Systems

Windows

Windows11 (64-bit), 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit)

macOS

macOSVentura 13, Monterey 12, Big Sur 11, Catalina 10.15, Mojave 10.14, High Sierra 10.13, Sierra 10.12, El Capitan 10.11, Yosemite 10.10, Mavericks 10.9, Mountain Lion 10.8, Lion 10.7, Snow Leopard 10.6, Leopard 10.5

Navigating the M401n driver lineup

HP publishes 13 separate Windows drivers for the M401n — grouped into four tiers based on use case.

Tier 1: Consumer and small-business drivers. The Full Solution Drivers and Software (82.54 MB) is HP’s recommended complete install — print driver plus HP Printer Assistant, Status Monitor, and the supporting utilities, covering Windows 10 down to Windows XP. The PCL 6 Print Driver with installer (69.54 MB) is the slim consumer package for Windows 8.1 and older — print-only, no utilities, smaller footprint. The PCL 6 Print Driver “no installer” (21.59 MB) is a raw driver package for silent deployment — unzip, add the printer manually through Windows’s Add Printer wizard.

Tier 2: Network Universal Print Drivers (UPD). HP’s enterprise drivers for fleets covering multiple HP printers from one installer. PCL6 Universal Print Driver (22.11 MB for 64-bit Windows 11-7, 19.44 MB for 32-bit Windows 10-7) is the PCL6 variant. PostScript Universal Print Driver (23.26 MB for 64-bit, 20.70 MB for 32-bit) is the PostScript variant — it emulates PostScript on the host side since the M401n itself is a PCL printer without a PostScript interpreter. Pick PostScript UPD if your application workflow expects a PostScript driver (Adobe graphics, some design software), PCL6 UPD otherwise.

Tier 3: USB Connected Universal Print Drivers. Variants of the UPD built specifically for USB-connected deployments rather than networked. USB Connected PCL6 UPD (22.44 MB for 64-bit, 19.80 MB for 32-bit) and USB Connected PostScript UPD (23.59 MB for 64-bit, 21.07 MB for 32-bit). These matter in environments with mixed USB and network HP printers where the standard UPD’s network discovery logic adds overhead.

Tier 4: Cloud and legacy utilities. The ePrint Software (31.19 MB for 64-bit, 26.22 MB for 32-bit) was built around HP’s ePrint cloud service. Important: HP discontinued the ePrint cloud service in January 2023 — email-to-printer features no longer work. The software still installs and still handles local network printer discovery on Windows 10 down to Windows 7, but the cloud-based ePrint sending is permanently offline.

On macOS, HP splits the install by era. HP Easy Start (10.89 MB) is the modern bootstrapper covering OS X Mavericks 10.9 through macOS Ventura 13. Legacy macOS has dedicated Full Software Solution packages: Mavericks 10.9 and Yosemite 10.10 (122.33 MB), Snow Leopard 10.6 through Mountain Lion 10.8 (132.55 MB), and Leopard 10.5 (124.86 MB). The ePrint Software for OS X 10.8 to 10.10 (6.61 MB) is a legacy utility whose cloud service was discontinued in January 2023. On macOS Sonoma 14 or newer, AirPrint handles basic printing without any driver install.

HP LaserJet Pro 400 M401n Drivers for Windows

PCL 6 Print Driver – no installer for Windows

Windows 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit) — PCL 6, manual install

21.59 MBDownload

PCL 6 Print Driver for Windows 8.1, 8, 7, Vista, and XP

Windows 8.1, 8, 7, Vista, XP (32-bit and 64-bit) — PCL 6 slim install

69.54 MBDownload

ePrint Software – Network and Wireless Connected Printers (64-bit)

Windows 10, 8.1, 8, 7 (64-bit) — legacy network discovery (cloud service discontinued)

31.19 MBDownload

ePrint Software – Network and Wireless Connected Printers (32-bit)

Windows 10, 8.1, 8, 7 (32-bit) — legacy network discovery (cloud service discontinued)

26.22 MBDownload

PCL6 Universal Print Driver for Windows (64-bit)

Windows 11, 10, 8.1, 8, 7 (64-bit) — fleet PCL6 driver

22.11 MBDownload

PCL6 Universal Print Driver for Windows (32-bit)

Windows 10, 8.1, 8, 7 (32-bit) — fleet PCL6 driver

19.44 MBDownload

PostScript Universal Print Driver for Windows (64-bit)

Windows 11, 10, 8.1, 8, 7 (64-bit) — fleet PostScript emulation driver

23.26 MBDownload

PostScript Universal Print Driver for Windows (32-bit)

Windows 10, 8.1, 8, 7 (32-bit) — fleet PostScript emulation driver

20.70 MBDownload

USB Connected PCL6 Universal Print Driver for Windows ( 64-bit)

Windows 11, 10, 8.1, 8, 7 (64-bit) — USB-only fleet PCL6 driver

22.44 MBDownload

USB Connected PCL6 Universal Print Driver for Windows (32-bit)

Windows 10, 8.1, 8, 7 (32-bit) — USB-only fleet PCL6 driver

19.80 MBDownload

USB PostScript Universal Print Driver (64-bit)

Windows 11, 10, 8.1, 8, 7 (64-bit) — USB-only fleet PostScript driver

23.59 MBDownload

USB PostScript Universal Print Driver (32-bit)

Windows 10, 8.1, 8, 7 (32-bit) — USB-only fleet PostScript driver

20.70 MBDownload

HP LaserJet Pro 400 M401n Drivers for macOS

Full Software Solution for OS X 10.10 and 10.9

OS X Mavericks 10.9 and Yosemite 10.10 — legacy complete install

122.33 MBDownload

ePrint Software – Network and Wireless Printers for OS X 10.8 to 10.10

OS X Mountain Lion 10.8 through Yosemite 10.10 — legacy (cloud service discontinued)

6.61 MBDownload

Full Software Solution for Mac OS X 10.6 to OS X 10.8

Mac OS X Snow Leopard 10.6 through OS X Mountain Lion 10.8 — legacy complete install

132.55 MBDownload

Full Software Solution for macOS 10.5

Mac OS X Leopard 10.5 — oldest legacy install

124.86 MBDownload

Set up the printer first

  • Sign in to Windows or macOS with an account that has administrator rights.
  • Plug the M401n’s power cable into a wall outlet but leave the printer off. The installer tells you when to power it on.
  • Pick your connection path: USB or Gigabit Ethernet. The M401n has no Wi-Fi radio of any kind — these are the only two options on this variant (wireless is a different model in the M401 family).
  • Unbox the printer, remove all orange protective tape, and remove any shipping locks from the toner cartridge before installing it.
  • Install the HP CF280A (80A) starter toner cartridge that came with the printer. For replacement, CF280A is the standard (~2,700 pages) and CF280X (80X) is the high-yield (~6,900 pages).
  • Load plain paper in the 250-sheet main tray. The 50-sheet multipurpose tray on the front is for occasional envelope, label, or specialty paper feeding.
  • Connect either a USB cable (Type-B connector on the printer) or a Cat 5e/Cat 6 Ethernet cable from the RJ-45 port to your network switch.
  • The M401n has a 3-line monochrome LCD — not a touchscreen. Menu navigation uses the OK and arrow buttons on the control panel. Status, error codes, and setup menus all flow through this small LCD.
  • To find the printer’s IP address for manual install, print a Configuration Page from the printer’s menu: Setup > Reports > Configuration Report. The IP appears in the network section of the report.

Walking through Windows setup

  1. Pick the right installer for your use case. For a home or small-office setup on Windows 10, 8.1, 8, 7, Vista, or XP — use the Full Solution Drivers and Software (82.54 MB) as the starting point. For Windows 11 — Full Solution doesn’t officially cover it; use the PCL6 Universal Print Driver (22.11 MB for 64-bit) instead. For enterprise fleet rollout — pick the Universal Print Driver variant that matches your workflow (PCL6 UPD for most, PostScript UPD for Adobe graphics or similar). For USB-only environments — use the USB Connected variant of the UPD.
  2. Right-click the downloaded installer and pick Run as administrator.
  3. Accept the license agreement when the installer prompts.
  4. Pick your connection method: USB or Wired Network (Ethernet). No wireless option appears — this printer is USB and Ethernet only.
  5. For USB — connect the cable between the printer and the PC when the installer tells you to.
  6. For Wired Network — plug a Cat 5e cable between the printer and your switch or router, then run the installer and pick Wired Network. The installer finds the printer by IP on the local subnet.
  7. Let the installer complete and print a test page from the driver properties dialog.
  8. For a slim print-only install, use the PCL 6 Print Driver “no installer” (21.59 MB) — unzip it and add the printer manually through Settings > Printers & scanners > Add printer, pointing at the extracted INF file. This is standard for silent and scripted deployment.
  9. Skip the ePrint Software unless you specifically want HP’s local network discovery utility — the cloud email-to-print feature it was built around was discontinued in January 2023.
  10. On Windows 7, Vista, or XP, if the Full Solution installer stops with a .NET Framework error, install .NET Framework 2.0 or 3.5 from Microsoft’s legacy download page first.

Walking through macOS setup

Pick the installer that matches your macOS version. HP’s install flow for this model splits into four macOS eras.

On macOS Monterey 12 or Ventura 13: use HP Easy Start (10.89 MB) — a small bootstrapper that fetches the right driver components for your macOS version. Alternatively, on OS X Mavericks 10.9 through macOS Catalina 10.15, Easy Start is also the recommended path.

On OS X Yosemite 10.10 or Mavericks 10.9: as an alternative to Easy Start, use the Full Software Solution for OS X 10.10 and 10.9 (122.33 MB) — a complete legacy installer.

On OS X Lion 10.7, Mountain Lion 10.8, or Mac OS X Snow Leopard 10.6: use the Full Software Solution for Mac OS X 10.6 to OS X 10.8 (132.55 MB).

On Mac OS X Leopard 10.5: use the oldest legacy Full Software Solution (124.86 MB).

For all packages, mount the DMG (or zip for Easy Start), run the installer pkg inside, and add the printer in System Settings > Printers & Scanners (macOS 13) or System Preferences > Printers & Scanners (macOS 12 and earlier) if it doesn’t appear automatically.

On macOS Sonoma 14, Sequoia 15, or Tahoe 26: HP did not extend driver support past Ventura 13 for this model. AirPrint handles basic printing on newer macOS — add the printer by IP address in System Settings > Printers & Scanners. The M401n supports standard PCL6 so AirPrint works reliably, unlike older host-based HP LaserJets where AirPrint compatibility is inconsistent.

Verify the printer is working

  • Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The HP LaserJet Pro 400 M401n should appear in the printer list.
  • Print a test page from the driver properties dialog. First page out is around 8 seconds from standby; steady-state speed is 33 ppm on multi-page jobs.
  • Check the 3-line monochrome LCD on the printer — it should display “Ready” when idle. If a yellow Attention indicator is lit, the LCD shows the error code (paper jam, toner low, door open).
  • Print a Configuration Report from the printer menu (Setup > Reports > Configuration Report) and confirm the IP address, memory (128 MB base), and firmware version. The configuration page is useful for troubleshooting network issues later.
  • For two-sided output, remember the M401n has no automatic duplex (that’s the M401d or M401dn/dne/dw variants). Use the print dialog’s manual duplex option to flip pages automatically through a guided flow.
  • Open the printer’s embedded web server by typing its IP address into any browser on the same network — this gives you detailed status, consumables, and configuration access without installing HP’s utility suite.

Printing from phones (limited)

The M401n was built before most HP printers added direct mobile printing. It has no Wi-Fi radio, no Wi-Fi Direct, no NFC, and no built-in mobile printing support. What’s possible depends on your network.

AirPrint over the local network. Because the M401n is on Ethernet and supports standard printing protocols, iOS and iPadOS devices on the same Wi-Fi network as the printer’s Ethernet LAN can print to it over AirPrint. The printer and the phone share the network through your router — the phone goes wireless to the router, the router routes the print job to the printer over Ethernet. This works well on modern iOS.

HP Smart app on Android. The HP Smart app can discover network-connected HP printers including the M401n when phone and printer are on the same network (through the router). Install HP Smart from Google Play, pair with the printer, and print from phone.

Mopria Print Service. Android devices with Mopria built in can discover the M401n over the network through the router. No direct peer-to-peer — the connection flows through your Wi-Fi router.

What doesn’t work:

  • Direct phone-to-printer pairing without a router — the M401n has no Wi-Fi Direct.
  • HP ePrint email-to-print — HP discontinued the ePrint cloud service in January 2023. Any ePrint email address previously assigned to this printer has stopped accepting jobs.
  • Google Cloud Print — Google retired Cloud Print in December 2020.
  • NFC tap-to-print — the M401n has no NFC reader.

Fixing install issues

  • Full Solution installer stalls on Windows. Delete the download and re-download — 82 MB can pick up a bad transfer. If a fresh download doesn’t help, try the PCL 6 Print Driver “no installer” (21.59 MB) as a slim alternative — unzip and add the printer manually through Windows’s Add Printer wizard.
  • Full Solution refuses to install on Windows 11. HP’s Full Solution for the M401n targets Windows 10 and earlier. On Windows 11, use the PCL6 Universal Print Driver (22.11 MB for 64-bit) or install the Full Solution in Windows 10 compatibility mode — right-click the .exe, pick Properties, open the Compatibility tab, and set it to run as Windows 10.
  • Printer not found over network during install. Print a Configuration Report (Setup > Reports > Configuration Report) and note the IP address. Then re-run the installer and, if prompted for IP, enter it manually. The installer’s auto-discovery can miss printers on different subnets or networks with strict mDNS filtering.
  • Printer not detected over USB. Switch to a direct USB port on the PC rather than a hub. Swap the cable if you have a spare — the M401n uses a standard USB Type-B connector on the printer side.
  • Which Universal Print Driver variant to pick. If in doubt, the PCL6 Universal Print Driver is the right default for 99% of use cases — it’s the modern HP fleet driver. Use PostScript UPD only if your specific application requires PostScript (some Adobe graphics software, print management systems). Use USB Connected variants only when deploying across many USB-connected M401n units where you want to skip network discovery entirely.
  • “No installer” package doesn’t launch. That’s intentional — the “no installer” variants are raw driver packages for manual install. Unzip the file, then add the printer through Windows’s Add Printer wizard, pointing at the extracted folder containing the INF file.
  • No driver on macOS Sonoma 14 or newer. HP’s driver support stops at Ventura 13. On Sonoma, Sequoia, or Tahoe, AirPrint handles basic printing — add the printer by IP in System Settings > Printers & Scanners. The M401n supports standard PCL6 so AirPrint works reliably.
  • Legacy .NET Framework missing on Windows 7, Vista, or XP. HP’s Full Solution on legacy Windows depends on .NET Framework 2.0 or 3.5. Install .NET from Microsoft’s legacy download page before re-running the HP installer.

Living with a 2012 network laser

The M401 series is discontinued. HP stopped manufacturing the M401 family around 2017 when the newer LaserJet Pro M402 line launched. New units are no longer sold through HP or most retailers — the market today is refurbished and used stock. Driver support outlasted the hardware and still covers Windows 11 and macOS Ventura 13.

HP ePrint service discontinued January 2023. The email-to-print cloud feature that was a selling point when the M401n launched in 2012 no longer works. ePrint email addresses previously assigned to this printer have stopped accepting jobs. HP Smart app is the current mobile printing path.

No Windows 11 Full Solution. HP never published a Windows 11-specific Full Solution for this model. Windows 11 users have the PCL6 Universal Print Driver (22.11 MB for 64-bit) as the primary option — it covers Windows 11 and provides reliable printing, though without HP’s consumer utility suite. For HP utilities on Windows 11, run the Windows 10 Full Solution in compatibility mode.

No driver on macOS Sonoma 14 or newer. HP’s dedicated driver support extends through macOS Ventura 13. On Sonoma, Sequoia, or Tahoe, AirPrint handles basic printing. The M401n’s PCL6 support means AirPrint works reliably on newer macOS.

No Wi-Fi on this variant. M401n = network (Ethernet-only). If you need wireless, the M401dw variant has built-in Wi-Fi. Other M401 family variants include M401a (base USB), M401d (duplex USB), M401dn (duplex + Ethernet), and M401dne (+ encryption). Driver compatibility is similar across variants but exact feature support differs.

Manual duplex only on this variant. M401n doesn’t have the d suffix — automatic two-sided printing isn’t built in. For two-sided documents, use the print dialog’s manual duplex flow that automates the page order with a flip prompt mid-job.

CF280A and CF280X toner still produced. HP continues to manufacture CF280A (80A, ~2,700 pages) and CF280X (80X high-yield, ~6,900 pages) cartridges for this series. Compatible third-party cartridges are widely sold. HP’s Status Monitor may flag non-HP cartridges but printing still works.

Starter toner has reduced yield. HP ships the M401n with a starter CF280A cartridge rated at fewer pages than the full retail cartridge. For regular use, plan on the CF280X high-yield replacement early.

Google Cloud Print is gone. The M401n originally supported Google Cloud Print. Google retired Cloud Print in December 2020 — any Cloud Print setup on this printer has been inactive since then.

Microsoft legacy framework phase-out. The M401n drivers predate Microsoft’s phase-out of .NET Framework 2.0 and 3.5 on current Windows. The Universal Print Drivers are self-contained and don’t depend on legacy .NET. The Full Solution can need .NET Framework 2.0/3.5 on Windows 7, Vista, or XP — install it from Microsoft’s legacy download page if HP’s installer complains.

Firmware updates are rare but exist. HP periodically shipped firmware updates for the M401n through about 2018. To check or update firmware, open the printer’s embedded web server by typing its IP into a browser, log in if prompted, and navigate to Settings > Firmware Update. Updates slowed after HP discontinued the model but the capability is still there for the last published firmware revision.

Removing the driver completely

On Windows:

  1. Open Settings > Printers & scanners and remove the HP LaserJet Pro 400 M401n entry.
  2. Open Settings > Apps > Installed apps and uninstall HP LaserJet Pro 400 M401, HP Printer Assistant, HP Status Monitor, HP ePrint Software, HP Universal Print Driver, and any other HP component tied to the M401n.
  3. Open Control Panel > Programs and Features as well — older HP components sometimes register only in the legacy Programs list.
  4. Open Device Manager, expand Print queues, right-click any HP M401n entries, and pick Uninstall device.
  5. Reboot.

On macOS:

  1. Open System Settings > Printers & Scanners and remove the M401n.
  2. Remove HP driver files from /Library/Printers/hp/ if present.
  3. Drag HP Utility and HP Easy Start from /Applications/ to the Trash if installed.
  4. Restart the Mac.

M401n specifications reference

Spec Value
Print technology Monochrome laser (PCL6-native)
Functions Print only (no scan, copy, or fax)
Print speed Up to 33 pages per minute
Print resolution 1200 x 1200 dpi
Duplex printing Manual only (M401n has no automatic duplex — that’s the M401d, M401dn, M401dne, or M401dw variants)
First page out time About 8 seconds from Ready mode
Monthly duty cycle Up to 50,000 pages
Paper capacity 250-sheet main tray + 50-sheet multipurpose tray + 150-sheet output
Memory 128 MB base, expandable via DIMM slot
Display 3-line monochrome LCD with navigation buttons
Connections Hi-Speed USB 2.0, Gigabit Ethernet 10/100/1000 — no Wi-Fi (n in M401n = network, not wireless)
Mobile printing (current) AirPrint, Mopria, HP Smart app — all through the local network via Ethernet
Mobile printing (discontinued) HP ePrint email-to-print (ended January 2023), Google Cloud Print (ended December 2020)
Print languages PCL6, PCL5e, PostScript Level 3 emulation via Universal Print Driver
Windows support 11 (64-bit, UPD only), 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit)
macOS support Mac OS X Leopard 10.5 through macOS Ventura 13 (Sonoma 14+ via AirPrint)
Toner cartridges HP CF280A (80A, approx. 2,700 pages), HP CF280X (80X high-yield, approx. 6,900 pages)
Release year 2012
Product status Discontinued (around 2017); driver support still available

Frequently Asked Questions

How do I connect the HP LaserJet Pro 400 M401n to my computer?

Two options. USB — plug a USB Type-B cable from the printer to your PC’s USB port, run the Full Solution Drivers and Software installer (82.54 MB) or the PCL6 Universal Print Driver (22.11 MB for 64-bit Windows 11-7), pick USB when the connection method screen appears. Wired Network (Ethernet) — plug a Cat 5e or Cat 6 cable from the printer’s RJ-45 port to your network switch or router, then run the installer and pick Wired Network. The installer finds the printer by IP on the local subnet. The M401n has no Wi-Fi radio of any kind — wireless isn’t an option on this variant; the wireless sibling is the M401dw.

Is the HP LaserJet Pro 400 discontinued?

Yes. HP discontinued the LaserJet Pro 400 M401 family around 2017 when the newer LaserJet Pro M402 series launched to replace it. The hardware is no longer manufactured or sold new through HP or most retailers — the market today is refurbished and used stock. Driver support outlasted the hardware; HP continued publishing driver updates and current coverage extends through Windows 11 (via Universal Print Driver) and macOS Ventura 13. HP’s ePrint cloud service was separately discontinued in January 2023, so email-to-print features that shipped with this printer at launch no longer work.

How do I update firmware on the HP LaserJet Pro 400 M401n?

Through the printer’s embedded web server. First, find the printer’s IP address — print a Configuration Report from the printer menu (Setup > Reports > Configuration Report) and look for the IPv4 address in the network section. Then open any web browser on a computer that’s on the same network, type the IP address into the address bar, and press Enter. The HP embedded web server loads. Log in with your admin credentials (if set) and navigate to Settings > Service > Firmware Update. If an update is available, follow the prompts; the printer downloads and applies the firmware itself. HP shipped firmware updates for the M401n through about 2018, and the last published version is still accessible through this flow. Do not power off the printer during a firmware update — interrupting a flash can brick the device.

How do I install the HP LaserJet Pro driver for the M401n?

Scroll up to the HP LaserJet Pro 400 M401n Drivers for Windows or Drivers for macOS section on this page. The Windows section has 13 driver variants — the recommended starting point for home or small-business use is the Full Solution Drivers and Software (82.54 MB) for Windows 10 down to XP. For Windows 11, use the PCL6 Universal Print Driver (22.11 MB for 64-bit) — HP didn’t publish a Windows 11-specific Full Solution for this model. Right-click the .exe, pick Run as administrator, accept the license, pick USB or Wired Network as your connection method, and follow the prompts. On macOS Mavericks 10.9 through Ventura 13, use HP Easy Start (10.89 MB) — mount the zip and run it.

Does the HP LaserJet Pro 400 M401n work on Windows 11?

Yes, through the PCL6 Universal Print Driver (22.11 MB for 64-bit). HP did not publish a Windows 11-specific Full Solution for this model — the consumer Full Solution covers Windows 10 and earlier only. For Windows 11 printing, the PCL6 Universal Print Driver provides full print functionality and is actively maintained. If you want HP’s consumer utility suite on Windows 11, install the Windows 10 Full Solution in Windows 10 compatibility mode (right-click the .exe, Properties, Compatibility tab).

What toner does the HP LaserJet Pro 400 M401n use?

HP CF280A (80A) standard-yield (~2,700 pages) or HP CF280X (80X) high-yield (~6,900 pages). Same cartridge body, different ink capacities. For a business workload matching the 50,000-page monthly duty cycle, the 80X high-yield is the practical choice — about 2.5x the yield at a lower cost per page. HP continues to manufacture both cartridges, and compatible third-party CF280A and CF280X are widely sold.

What’s the difference between PCL6 UPD and USB Connected PCL6 UPD?

Both install the same PCL6 Universal Print Driver, but the USB Connected variant skips the network discovery logic that the standard UPD runs at startup. On a USB-only M401n (or a fleet of USB-connected M401n units), the standard UPD’s constant background network scan is wasted overhead; the USB Connected variant avoids that. For most users on a network-connected M401n, pick the standard PCL6 Universal Print Driver — network discovery is the whole point. The USB Connected variant is for specific enterprise deployments where USB is the only connection path across many printers.