The HP LaserJet Pro M402n has been a workhorse in home offices and small businesses since 2015, and the driver support is still available for all the OS versions it officially covers. HP publishes a full PCL6 v3 solution for Windows 10, a separate full driver package for Windows 7, several standalone driver options for environments that need just the print component, and HP Easy Start for macOS through Ventura 13.
This page has every download for the M402n, plus the install flow I use when I set one of these up. I’ve also added notes on the “n” suffix (what it means for connectivity), Windows 11 compatibility (HP doesn’t officially support it), and the Mac situation on macOS Sonoma and newer.
🖥️Supported Operating Systems
![]()
![]()
Which driver do I need for the LaserJet Pro M402n?
On Windows you have a few options, and the right pick depends on your OS version and how much HP software you want installed. The PCL6 v3 Full Solution is the recommended package for Windows 10, 8.1, and 8. It installs the print driver, the HP status utility, and the install wizard in one go.
For Windows 7, the Full Drivers and Software package is a separate download that covers the same scope — print driver plus HP utilities — in a Windows 7-specific build.
If you want just the print driver without the full installer (for silent deployment, driver-only install, or if the full package won’t run on your system), the no-installer PCL6 v3 and PCL6 v4 packages are the right pick. PCL6 v4 is HP’s newer print driver framework; PCL6 v3 is the older generation and remains compatible across more Windows versions. The PCL6 v3 Print Driver Solution for Windows 7 is a Windows 7-specific version of the no-installer v3 driver with the installer wrapper added back on.
The legacy Vista/XP packages cover those older Windows versions with the same two options: standalone PCL6 driver without an installer, or the full PCL6 Legacy Printer Driver package with the installer.
On macOS, HP ships a single HP Easy Start setup utility that fetches the right driver for your Mac version. It covers OS X 10.9 Mavericks through macOS Ventura 13 in one download.
HP LaserJet Pro M402n Drivers for Windows
Start Here
PCL6 v3 Full Solution
Full Drivers and Software (Windows 7)
PCL6 v4 Print Driver (no installer)
PCL6 v3 Print Driver (no installer)
PCL6 v3 Print Driver Solution (Windows 7)
PCL6 Print Driver (Vista / XP, no installer)
PCL6 Legacy Printer Driver (Vista / XP)
HP LaserJet Pro M402n Drivers for macOS
Start Here
HP Easy Start Printer Setup Software
Before you install
A few things to line up so the install runs clean the first time.
- Sign in with a Windows account that has administrator rights. The installer prompts for elevation and will stop if it can’t get it.
- On a Mac, make sure your account can approve a system extension prompt (admin password handy).
- Connect the power cable and plug the M402n into a wall outlet. Don’t power it on yet. The installer will tell you when to turn it on.
- Decide whether you’re installing over USB or Ethernet. The M402n has no Wi-Fi, so those are your two options. Ethernet needs a cable to your router or switch.
- Close any open print app and any previous HP utility. The installer can’t replace a driver that’s in use.
- Pull the orange tape off the toner cartridge and remove the shipping locks before you start.
Install the LaserJet Pro M402n driver step by step
Click the download link next to the PCL6 v3 Full Solution in the Driver files section above (or the Windows 7 Full Drivers and Software package if you’re on Windows 7) and save the installer to your Downloads folder.
Walk through the installer:
- Right-click the downloaded file and pick Run as administrator (Windows) or run HP Easy Start on the Mac.
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks. Choose USB or Wired Network.
- If you picked USB, connect the printer to your Mac or PC with a USB cable and turn it on when the installer tells you to.
- If you picked Wired Network, connect an Ethernet cable between the printer and your router or switch, and turn the printer on. The installer discovers the printer by IP address on the local network.
- Let the installer finish. HP’s full package takes several minutes to extract and install.
- Print a test page from the driver properties dialog once install completes.
On macOS, HP Easy Start takes over after you run the DMG. It detects the M402n on your network and walks you through adding it to Printers & Scanners automatically.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The HP LaserJet Pro M402n should appear in the list.
- Print a test page from the driver properties dialog. If the page comes out blank, check that the toner cartridge is seated correctly and the orange shipping tape is fully removed.
- Check the 2-line LCD on top of the printer. “Ready” on the display confirms the printer is online and waiting for jobs.
- In your usual app, open the print dialog and verify that the M402n is selectable and that paper size options include your common formats.
Print from your phone or tablet
The M402n supports AirPrint on iPhone and iPad for basic printing. Make sure the printer and the iPhone are on the same network — on a wired-Ethernet M402n, that means your iPhone and the printer need to share a router.
HP ePrint is HP’s cloud print service. Each M402n gets a unique @hpeprint.com email address, and sending a document to that address queues it for printing. Setup happens through the HP Smart app or through the printer’s built-in web interface.
For Android, Mopria Print Service works with the M402n when both devices are on the same network.
If install fails
Windows 11 is where most install trouble lands on this printer, since HP doesn’t publish an official Windows 11 driver for the M402n. The workarounds below cover the common failure modes, in the order I’d try them.
- PCL6 v4 driver on Windows 11. The standalone PCL6 v4 Print Driver (no installer) sometimes installs cleanly on Windows 11 even though the Full Solution package doesn’t. Download the PCL6 v4 driver from the Windows driver files above, then add the printer through Settings > Printers & scanners > Add device > “The printer that I want isn’t listed” > Add a local printer with manual settings, and point the driver browser at the extracted folder.
- Compatibility mode для the Full Solution package. Right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for”. Try Windows 10 first, since that’s HP’s newest supported Windows. If it still fails, step down to Windows 8 and Windows 7. Save after each change and run the installer as administrator each time.
- Add the printer through Windows directly on Windows 11. Open Settings > Bluetooth & devices > Printers & scanners, click Add device, pick The printer that I want isn’t listed, then Add a printer using a TCP/IP address or hostname, and enter the M402n’s IP address (print a configuration page from the printer to find it). Windows installs a generic driver that handles basic printing.
- Printer not detected over Ethernet. Confirm the printer got an IP address by printing a configuration report from the printer’s control panel (Menu > Reports > Configuration Report). If the IP section is blank or shows 0.0.0.0, check the Ethernet cable, the router port, and that DHCP is enabled on the router.
- Previous HP driver stuck. Open Settings > Printers & scanners, remove any older M402n entries, then open Apps > Installed apps and uninstall any HP utility tied to the M402n. Reboot, then rerun the installer.
- Last resort: HP Print and Scan Doctor. HP’s diagnostic utility runs through common install and connection problems automatically. Download it from HP’s support site and run it against the M402n.
Known issues with the LaserJet Pro M402n
Windows 11 is not officially supported. HP’s driver listing for the M402n ends at Windows 10. Community reports on the HP Support Community confirm that community-suggested workarounds (compatibility mode, PCL6 driver installs, generic Windows driver) have mixed success. The standalone PCL6 v4 driver is usually the best starting point for a Windows 11 attempt, and adding the printer by IP through Windows’s built-in Add Device wizard is the reliable fallback for basic printing.
macOS support ends at Ventura 13. HP Easy Start officially covers up to macOS Ventura 13. On macOS Sonoma 14 and newer, the M402n relies on AirPrint for basic printing — you lose HP-specific features, but the print function itself still works.
No Wi-Fi on the M402n. The “n” in M402n means Network (Ethernet). For wireless printing, you’d need the M402dw variant, which has 802.11 b/g/n Wi-Fi built in. The M402n only connects over USB or Ethernet.
Manual duplex only. The M402n doesn’t have automatic two-sided printing. To print on both sides, you flip the paper manually between page passes, or you step up to the M402dn (the “d” adds Duplex).
The M402 naming convention. HP’s compact LaserJet suffixes are: d = Duplex, n = Network (Ethernet), w = Wireless, e = Enterprise provisioning. M402n has Ethernet; M402d has Duplex but no network; M402dn has both Duplex and Network; M402dw has Duplex and Wireless; M402dne has Enterprise provisioning on top. Check your printer’s exact model label if you’re not sure which variant you have — the drivers above are for the M402n specifically.
How to fully uninstall the LaserJet Pro M402n driver
On Windows:
- Open Settings > Printers & scanners and remove the HP LaserJet Pro M402n entry.
- Open Settings > Apps > Installed apps and uninstall HP LaserJet Pro M402, HP Status Solutions Center, and any other HP component tied to the M402n.
- Reboot.
- For a true clean wipe before a fresh install, open Driver Store Explorer (RAPR), filter by HP, and remove the M402 driver package from the Windows driver store.
On macOS:
- Open System Settings > Printers & Scanners and remove the M402n.
- Run HP’s Uninstaller utility if it was installed alongside the driver, or manually remove files from
/Library/Printers/hp/. - Restart the Mac.
HP LaserJet Pro M402n at a glance
| Spec | Value |
|---|---|
| Release year | 2015-2016 |
| Print technology | Monochrome laser |
| Print speed | Up to 40 pages per minute |
| Max resolution | 600 x 600 dpi native, FastRes 1200 enhancement |
| Duplex printing | Manual only (M402dn variant has automatic) |
| Connections | Hi-Speed USB 2.0, Gigabit Ethernet (10/100/1000). No Wi-Fi. |
| Mobile printing | AirPrint (iOS), HP ePrint (cloud email), Mopria (Android) |
| Windows support | 10, 8.1, 8, 7, Vista, XP. Windows 11 not officially supported. |
| macOS support | OS X 10.9 Mavericks through macOS Ventura 13 (Sonoma+ via AirPrint) |
| Linux support | Yes, via HPLIP (HP’s Linux driver package, hosted on HP’s Linux printing site) |
| Toner cartridge | HP 26A (CF226A) standard, HP 26X (CF226X) high-yield |
| Weight | About 9.4 kg (20.7 lb) |
| Dimensions | 15 x 14.1 x 8.5 inches |
Frequently Asked Questions
Where can I download the HP LaserJet Pro M402n driver software for Windows 10?
Scroll up to the Driver files section on this page. The PCL6 v3 Full Solution (75.93 MB) is HP’s recommended package for Windows 10, 8.1, and 8 — it installs the print driver, the HP status utility, and the install wizard in one go. All downloads on this page are the current HP-released files, with no signup walls or bundled toolbars.
Does the HP LaserJet Pro M402n work on Windows 11?
HP doesn’t publish an official Windows 11 driver for the M402n. Community reports on the HP Support Community confirm that no workaround is universally reliable. The best options are: install the standalone PCL6 v4 driver and add the printer manually through Windows, run the Full Solution installer in Windows 10 compatibility mode, or add the printer by IP address through Windows’s built-in Add Device wizard for basic printing through a generic driver.
How do I download the HP LaserJet Pro M402n driver for Windows 7?
Grab the Full Drivers and Software for Windows 7 package (88.97 MB) from the Driver files section above. It’s a Windows 7-specific build of the full HP driver bundle covering both 32-bit and 64-bit. For a smaller print-only install, the PCL6 v3 Print Driver Solution for Windows 7 (74.38 MB) also works.
Does the HP LaserJet Pro M402n work on Mac?
Yes, officially through macOS Ventura 13. Download HP Easy Start from the Driver files section above, and it fetches the right driver for your Mac version in one step. On macOS Sonoma 14 and newer, HP hasn’t released a dedicated driver, but AirPrint handles basic printing — the printer will show up in Printers & Scanners after you add it over the network.
Is the HP LaserJet Pro M402n driver free to download?
Yes. All M402n driver files are free. No signup, no payment, no account required.
What’s the difference between the M402n and M402dn (or M402dw)?
The letter suffix tells you what’s included. M402n has Network (Ethernet) only — no duplex, no wireless. M402d has automatic duplex but no network. M402dn has both Duplex and Network. M402dw has Duplex and Wireless (802.11 b/g/n Wi-Fi). M402dne adds Enterprise provisioning features. If you’re not sure which variant you have, check the model label on the printer itself — the drivers above are specifically for the M402n.
Can I use the HP LaserJet Pro M402n on Linux?
Yes. HP’s HPLIP package (HP Linux Imaging and Printing) covers the M402 series. Install it through your distribution’s package manager — on Debian and Ubuntu, sudo apt install hplip; on Fedora and RHEL, sudo dnf install hplip. Then run hp-setup in a terminal to add the printer by IP address or USB connection.
