The HP LaserJet Pro MFP M426fdw is a business monochrome laser multifunction printer from October 2015 — print, scan, copy, and fax in one unit, with a 50-sheet single-pass duplex ADF, Gigabit Ethernet, Wi-Fi with NFC tap-to-print, and a 2.7-inch color touchscreen. The “fdw” suffix decodes as fax + duplex + wireless. It prints at 40 pages per minute at 1200 x 1200 dpi, handles automatic two-sided printing, scans both sides of originals in one ADF pass, and uses HP’s CF226A (26A) and CF226X (26X) toner cartridges. Driver support covers Windows 11 all the way back to Windows XP and macOS Mavericks 10.9 through macOS Ventura 13.
HP discontinued the M426fdw around 2019 when the newer M428 series launched, but driver support continues. This page has every current HP driver for the model, plus install flows for Windows and Mac, notes on HP’s unusually wide Windows driver matrix (PCL6, PCL6 v3, PCL6 V4, and “Full Solution” versus “no installer” variants), and what’s happened to HP ePrint since the printer launched.
🖥️Supported Operating Systems
![]()
![]()
Breaking down the M426fdw driver options
HP publishes eight separate Windows driver files for the M426fdw — the widest driver matrix of any model in HP’s LaserJet Pro MFP line from that era. Each has a specific role:
PCL6 v3 Full Solution (100.01 MB) — Windows 11, 10, 8.1, 8. The complete install for modern Windows: PCL6 v3 print driver, scan driver, HP Printer Assistant, HP Scan, Status Monitor, PC Fax support, and the full utility suite. This is the recommended download for Windows 8 or newer.
Full Drivers and Software for Windows 7 (183.1 MB). A separate complete install specifically for Windows 7. HP split the Windows 7 package out because Windows 7 ships with an older PCL6 v3 build; the file is noticeably larger than the Windows 8+ version because it bundles additional Win 7-specific runtime components.
PCL6 V3 Printer Driver (12.78 MB for “no installer” Windows 11-7, or 91.59 MB with installer for Windows 7). The slim PCL6 v3 driver without the utility suite. The “no installer” version (12.78 MB) is a raw driver package for silent deployment — you add the printer manually through Windows’s Add Printer wizard and point it at the extracted INF file. The installer version for Windows 7 (91.59 MB) wraps the same driver in a consumer setup flow.
PCL6 V4 Printer Driver – no installer (11.15 MB) — Windows 11, 10, 8.1, 8. HP’s newer PCL6 V4 driver, designed for Windows 8 and newer. PCL6 V4 was Microsoft’s updated print driver model introduced with Windows 8 — it’s more Universal Print compatible and better integrated with modern Windows’s print pipeline. Use this if the standard PCL6 v3 gives you trouble on Windows 10 or 11.
PCL6 Printer Driver for Windows Vista and XP 32-bit (150.29 MB with installer, 16.98 MB “no installer”). The classic PCL6 driver for legacy Windows. HP maintained Vista/XP support for the M426fdw because the printer was still sold for enterprise environments where legacy OS compatibility mattered at launch. The installer version is the full consumer setup; the “no installer” version is for IT-managed silent deployments.
Universal Fax Driver for Windows 8.1, 8, 7, Vista, and XP (11.87 MB). HP’s cross-model fax driver for sending faxes from the PC through the M426fdw’s fax modem. The current PCL6 v3 Full Solution already includes PC Fax support — use this separate driver only if you’re on Windows 8.1 or older and want fax but not the Full Solution.
On macOS, HP publishes one Easy Start installer that covers OS X Mavericks 10.9 through macOS Ventura 13 in a single bootstrapper. HP did not publish a dedicated Full Feature DMG for this model — Easy Start is the single install path for all supported macOS versions. On macOS Sonoma 14 or newer, AirPrint handles basic printing without any driver install.
HP LaserJet Pro MFP M426fdw Drivers for Windows
Start Here
PCL6 v3 Full Solution for Windows
Full Drivers and Software for Windows 7
PCL6 V4 Printer Driver – no installer for Windows
PCL6 V3 Printer Driver – no installer for Windows (32-bit and 64-bit)
PCL6 V3 Printer Driver for Windows 7 (32-bit and 64-bit)
PCL6 Printer Driver for Windows Vista and XP (32-bit)
PCL6 Printer Driver – no installer for Windows Vista and XP (32-bit)
Universal Fax Driver for Windows
HP LaserJet Pro MFP M426fdw Drivers for macOS
Start Here
Easy Start Printer Setup Software for OS X 10.9 to macOS 13
Prep steps before setup
- Sign in to Windows or macOS with an account that has administrator rights.
- Plug the M426fdw’s power cable into a wall outlet but leave the printer off. The installer tells you when to power it on.
- Pick your connection path: USB, Wi-Fi, Gigabit Ethernet, Wi-Fi Direct, or NFC tap-to-pair. The M426fdw supports every common connection path a business MFP needs.
- Unbox the printer, remove all orange protective tape, lift the scanner lid, and remove any transit padding inside the ADF before powering on.
- Install the HP CF226A (26A) starter toner cartridge that came with the printer. For replacement, CF226A is the standard (~3,100 pages) and CF226X (26X) is the high-yield (~9,000 pages).
- Load plain paper in the 250-sheet main tray and close it fully.
- For wireless setup, the M426fdw’s Wi-Fi radio is 802.11 b/g/n (2.4 GHz only) — make sure your router exposes a 2.4 GHz SSID. Gigabit Ethernet is the alternative wired path and is the most reliable choice for a business network.
- If you plan to send and receive fax, connect the phone line to the LINE port on the back of the printer before install.
- To find the printer’s IP address for manual install or network troubleshooting, tap the Network icon on the 2.7-inch touchscreen or print a Network Configuration Report (Setup > Reports > Configuration Report).
Windows setup instructions
- Pick the right installer for your Windows version. On Windows 11, 10, 8.1, or 8 — use the PCL6 v3 Full Solution (100.01 MB). On Windows 7 — use the Windows 7-specific Full Drivers and Software (183.1 MB). On Windows Vista or XP 32-bit — use the PCL6 Printer Driver with installer (150.29 MB).
- Right-click the downloaded installer and pick Run as administrator.
- Accept the license agreement when the installer prompts.
- Pick your connection method: USB, Wireless, Wired Network (Ethernet), or Wi-Fi Direct.
- For USB — connect the cable between the printer and the PC when the installer tells you to.
- For Wireless — pair the printer to Wi-Fi first through the 2.7-inch touchscreen (Setup > Network > Wireless Setup Wizard), then run the installer and pick Wireless.
- For Gigabit Ethernet — plug a Cat 5e or Cat 6 cable between the printer and your switch, then run the installer and pick Wired Network. The installer finds the printer by IP on the local subnet.
- For NFC — if your laptop or desktop has an NFC reader, tap your NFC-enabled device to the NFC logo on the front of the printer during install for automatic pairing. Most Windows PCs don’t have NFC readers, so this is primarily for phones and tablets.
- Let the installer complete and print a test page from the driver properties dialog.
- For a slim install without the HP utility suite, use the PCL6 V3 Printer Driver “no installer” (12.78 MB) — unzip it and add the printer manually through Settings > Printers & scanners > Add printer, pointing at the extracted INF file.
- If the standard PCL6 v3 Full Solution has issues on Windows 10 or 11, try the PCL6 V4 Printer Driver “no installer” (11.15 MB) instead — PCL6 V4 is Microsoft’s newer print driver model and sometimes works better where PCL6 v3 struggles.
- For PC fax sending without the Full Solution, install the Universal Fax Driver (11.87 MB) separately — this covers Windows 8.1 and older; on Windows 10 and 11, PC Fax support is included in PCL6 v3 Full Solution.
macOS setup instructions
HP publishes a single Easy Start installer for the M426fdw on macOS — one bootstrapper covers OS X Mavericks 10.9 through macOS Ventura 13.
- Mount the Easy Start zip (11.42 MB) by double-clicking the downloaded file.
- Run the Easy Start installer and follow the prompts. Easy Start detects your macOS version, downloads the matching driver components, and walks through setup including Wi-Fi pairing.
- When Easy Start asks for your connection method, pick USB, Wireless, or Wired Network (Ethernet). For Wireless, Easy Start guides you through Wi-Fi pairing with the printer.
- Add the printer in System Settings > Printers & Scanners (macOS 13) or System Preferences > Printers & Scanners (macOS 12 and earlier) if Easy Start doesn’t do it automatically.
- Print a test page and run a scan test from Image Capture or Preview to confirm both print and scan are working.
On macOS Sonoma 14, Sequoia 15, or Tahoe 26: HP did not extend driver support past Ventura 13 for this model. AirPrint handles basic printing on newer macOS without any driver install — add the printer in System Settings > Printers & Scanners. The M426fdw is a full PCL6-compatible laser printer, so AirPrint works reliably with it — unlike older host-based HP LaserJets where AirPrint compatibility is inconsistent. Scanning on Sonoma and later goes through Image Capture (built into macOS); the M426fdw is AirScan-compatible.
Confirming everything works
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The HP LaserJet Pro MFP M426fdw should appear in the printer list.
- Print a test page from the driver properties dialog. Steady-state speed is around 40 ppm black ISO on long jobs.
- Check the 2.7-inch color touchscreen on the printer — it should display the Ready status and, on a wireless connection, a Wi-Fi signal strength indicator. On Ethernet, a wired network icon shows instead.
- Try a double-sided print to confirm automatic duplex works — set Print on Both Sides in the print dialog.
- Load a stack of two-sided originals in the 50-sheet ADF and run a duplex scan from HP Scan (Windows) or Image Capture (macOS). The M426fdw’s ADF scans both sides of each page in a single pass — no flipping needed. Confirm both sides of a two-sided original are captured.
- Try a standalone copy from the touchscreen without involving the PC.
- If fax is wired up, send a test fax from the touchscreen keypad.
- Test NFC pairing if you have an NFC-enabled Android phone — install HP Smart app, enable NFC on your phone, and tap the phone to the NFC logo on the front of the printer.
- Confirm toner level through HP Printer Assistant (Windows) or the printer’s touchscreen under Setup > Reports.
Printing and scanning from phones
The M426fdw has a strong mobile printing feature set for a 2015 business MFP.
AirPrint — iPhone and iPad print and scan directly to the M426fdw over Wi-Fi. Any iOS or iPadOS app with a Share sheet works. Make sure the phone and printer are on the same Wi-Fi network.
HP Smart app on Android — install HP Smart from Google Play, pair it with the M426fdw over Wi-Fi, and print or scan from phone or tablet. HP Smart handles print, scan, and ink/toner monitoring.
Mopria Print Service and Mopria Scan — another Android option for devices with Mopria built in. The M426fdw supports both print and scan over Mopria.
NFC tap-to-print — one of the M426fdw’s business features. On an NFC-enabled Android phone running HP Smart, tap the phone to the NFC logo on the front of the printer, and Wi-Fi pairing completes automatically. The print job flows from the phone to the printer without any manual network configuration.
Wi-Fi Direct — the M426fdw can broadcast its own temporary Wi-Fi network for direct phone-to-printer pairing without a router. Enable Wi-Fi Direct on the touchscreen under Network settings.
What no longer works:
- HP ePrint email-to-print — HP discontinued the ePrint cloud service in January 2023. Email addresses previously assigned to this printer have stopped accepting jobs. HP Smart is the current replacement.
- Google Cloud Print — Google retired Cloud Print in December 2020.
Common install problems
- PCL6 v3 Full Solution installer stalls on Windows. Delete the download and re-download — 100 MB is large enough to pick up a bad transfer. If a fresh download doesn’t help, try the PCL6 V4 Printer Driver “no installer” (11.15 MB) as a lighter alternative — it’s a different code path and often works when the Full Solution fails.
- Wrong installer for Windows 7. Make sure you downloaded the Full Drivers and Software for Windows 7 (183.1 MB) — not the PCL6 v3 Full Solution, which targets Windows 8 and newer only. HP ships separate builds because Windows 7’s print pipeline differs enough to need its own driver package.
- Wi-Fi install can’t find the printer. Pair the printer to Wi-Fi first through the touchscreen (Setup > Network > Wireless Setup Wizard), then run the installer and pick Wireless — this time it finds the printer by IP on the local subnet.
- Printer not detected over USB. Switch to a direct USB port on the PC rather than a hub. Swap the cable if you have a spare.
- Band steering on a dual-band router. The M426fdw’s Wi-Fi is 2.4 GHz only. If your router runs band steering, the PC and printer can land on different bands. Connect the PC to the 2.4 GHz SSID manually, or use Gigabit Ethernet — the most reliable path for a business MFP anyway.
- “No installer” driver gives an error on install. The “no installer” variants are raw driver packages, not setup executables. Unzip the downloaded archive, then add the printer manually through Windows’s Add Printer wizard and point it at the extracted folder containing the INF file. If you double-click the .exe expecting a setup flow, nothing happens — this is intentional, the package is for manual or scripted install.
- PCL6 v3 driver has print quality issues on Windows 11. Install the PCL6 V4 Printer Driver “no installer” (11.15 MB) instead. PCL6 V4 uses Microsoft’s newer print driver model and sometimes handles Windows 11’s print pipeline better than PCL6 v3.
- No driver on macOS Sonoma 14 or newer. HP’s driver support for the M426fdw extends through macOS Ventura 13. On Sonoma, Sequoia, or Tahoe, AirPrint handles basic printing — add the printer in System Settings > Printers & Scanners. The M426fdw supports standard PCL6, so AirPrint works reliably on newer macOS.
- Legacy .NET Framework missing on Windows 7 or Vista. HP’s Full Drivers on legacy Windows depend on .NET Framework 2.0 or 3.5. If the installer stops with a framework error, install .NET from Microsoft’s legacy download page first.
Troubleshooting the scanner, ADF, and fax
- Scanner not detected in HP Scan. On Windows, confirm you installed PCL6 v3 Full Solution or the Windows 7 Full Drivers — those include the scan component. The PCL6 V3 or V4 Printer Driver “no installer” versions are print-only and don’t include scanner support. Re-run Full Solution if scan is missing.
- ADF jams or pulls multiple sheets. The 50-sheet ADF has paper separation rollers that wear with heavy use. Clean the rollers with a lint-free cloth and a mild cleaner, and fan the stack of originals before loading. For glossy, thin, or wrinkled paper, scan from the platen glass instead.
- Duplex scan comes back one-sided. The M426fdw’s ADF is single-pass duplex — it physically scans both sides of each page in one pass. If output is one-sided, the scan driver’s duplex option may have been left off. Enable 2-sided scan explicitly in the scan driver dialog or in HP Scan — the default can be single-sided even though the hardware supports duplex.
- Copy output comes back faded or streaked. Lift the scanner lid and clean the platen glass with a lint-free cloth and a small amount of glass cleaner — never spray directly on the glass. Dust and fingerprints on the glass are the most common cause of streaked copies.
- ADF scan has black vertical lines. The ADF has a separate narrow scan strip below the main platen glass that captures pages as they feed through. Clean this strip with a lint-free cloth — it’s the strip of glass just below the ADF rollers when you lift the scanner lid.
- Fax rings but doesn’t answer. Open the touchscreen’s Fax menu and check the Receive Mode. The default on a shared phone line is manual or ring count-based; switch to Auto Answer for a dedicated fax line.
- Fax quality is poor at high speed. The M426fdw’s modem is 33.6 kbps Super G3. On noisy phone lines, lower the fax speed manually in the printer’s Fax menu — negotiating down to G3 or even to 14.4 kbps improves reliability on degraded connections.
- Scan to network folder fails. Scan-to-Network requires SMBv2 or newer on modern Windows and macOS (SMBv1 is disabled by default). Target an SMBv2/v3 share, and make sure the share permissions grant write access to the account the printer uses.
Known limitations on this model
The M426fdw is discontinued. HP stopped manufacturing this model around 2019 when the newer LaserJet Pro MFP M428 series launched. New units are no longer sold through HP or most retailers — the market today is refurbished and used stock. Driver support outlasted the hardware and still covers Windows 11 and macOS Ventura 13.
HP ePrint service discontinued January 2023. The email-to-print cloud feature that was a selling point at the M426fdw’s 2015 launch no longer works. ePrint email addresses previously assigned to this printer have stopped accepting jobs. HP Smart app is the current cloud-adjacent alternative for mobile printing.
No driver on macOS Sonoma 14 or newer. HP’s dedicated driver support extends through macOS Ventura 13. On Sonoma, Sequoia, or Tahoe, AirPrint handles basic printing — the M426fdw’s PCL6 support means AirPrint works reliably, unlike older host-based HP LaserJets.
Wi-Fi is 2.4 GHz only. The M426fdw’s 802.11 b/g/n radio doesn’t support 5 GHz. Gigabit Ethernet is the recommended wired path for a business setup, especially on networks with band steering.
No Windows 11 build for the classic PCL6 driver. HP’s classic PCL6 driver for Vista/XP never got a Windows 11 update — PCL6 v3 and PCL6 V4 are the Windows 11 options. This isn’t a practical limitation (PCL6 v3 Full Solution covers Windows 11 fully), but it means Vista/XP users are stuck on the older PCL6 and can’t move that same driver to newer Windows.
CF226A and CF226X toner still produced. HP continues to manufacture CF226A (26A, ~3,100 pages) and CF226X (26X high-yield, ~9,000 pages) cartridges. Compatible third-party cartridges are widely sold. HP’s Status Monitor may flag non-HP cartridges but printing still works.
Starter toner has reduced yield. HP ships the M426fdw with a starter CF226A cartridge rated at fewer pages than full retail cartridges. For a business workload hitting the 80,000-page monthly duty cycle, buy CF226X high-yield replacements early to keep page cost under control.
Google Cloud Print is gone. The M426fdw originally supported Google Cloud Print at launch. Google retired Cloud Print in December 2020 — Cloud Print setup on this model has been inactive since then.
Clean uninstall of the M426fdw driver
On Windows:
- Open Settings > Printers & scanners and remove the HP LaserJet Pro MFP M426fdw entry.
- Open Settings > Apps > Installed apps and uninstall HP LaserJet Pro MFP M426fdw, HP Printer Assistant, HP Scan, HP Universal Fax Driver, HP Status Monitor, and any other HP component tied to the M426fdw.
- Open Control Panel > Programs and Features as well — older HP components sometimes register only in the legacy Programs list.
- Open Device Manager, expand Print queues and Imaging devices, right-click any HP M426fdw entries, and pick Uninstall device.
- Reboot.
On macOS:
- Open System Settings > Printers & Scanners and remove the M426fdw.
- Remove HP driver files from
/Library/Printers/hp/if present. - Drag HP Easy Start and HP Utility from
/Applications/to the Trash if installed. - Restart the Mac.
The M426fdw by the numbers
| Spec | Value |
|---|---|
| Print technology | Monochrome laser |
| Functions | Print, scan, copy, fax (MFP) |
| Print speed | Up to 40 pages per minute |
| Print resolution | 1200 x 1200 dpi |
| Duplex printing | Automatic two-sided (d in M426fdw = duplex) |
| ADF capacity | 50 pages (single-pass duplex — one-pass two-sided scanning) |
| Fax modem | Super G3, up to 33.6 kbps (f in M426fdw = fax) |
| Paper capacity | 250-sheet main tray + 100-sheet multipurpose tray + 150-sheet output |
| Monthly duty cycle | Up to 80,000 pages |
| Display | 2.7-inch color touchscreen |
| Memory | 256 MB |
| Connections | Hi-Speed USB 2.0, Wi-Fi 802.11 b/g/n (2.4 GHz only, w in M426fdw = wireless), Gigabit Ethernet, Wi-Fi Direct, NFC tap-to-print |
| Mobile printing (current) | AirPrint, Mopria, HP Smart app, NFC tap-to-print, Wi-Fi Direct |
| Mobile printing (discontinued) | HP ePrint email-to-print (ended January 2023), Google Cloud Print (ended December 2020) |
| Windows support | 11 (64-bit), 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit) |
| macOS support | Mavericks 10.9 through Ventura 13 (Sonoma 14+ via AirPrint) |
| Toner cartridges | HP CF226A (26A, approx. 3,100 pages), HP CF226X (26X high-yield, approx. 9,000 pages) |
| Release year | October 2015 |
| Product status | Discontinued (around 2019); driver support still available |
Frequently Asked Questions
Is the HP LaserJet Pro MFP M426fdw discontinued?
Yes. HP discontinued the M426fdw around 2019 when the newer LaserJet Pro MFP M428 series launched to replace it. The hardware is no longer manufactured or sold new through HP or most retailers — the market today is refurbished and used stock. Driver support outlasted the hardware; HP continued publishing driver updates and current coverage extends through Windows 11 and macOS Ventura 13. HP’s ePrint cloud service was separately discontinued in January 2023, so email-to-print features no longer work. For keeping an existing M426fdw running, the drivers on this page are still valid.
How do I set up Wi-Fi on my HP LaserJet Pro MFP M426fdw printer?
Pair through the 2.7-inch color touchscreen on top of the printer. Tap Setup > Network Setup > Wireless Setup Wizard, pick your SSID from the list of networks the printer sees, and enter the Wi-Fi password with the on-screen keyboard. The M426fdw’s Wi-Fi radio is 802.11 b/g/n (2.4 GHz only) — make sure your router exposes a 2.4 GHz SSID. On a dual-band router with band steering, the 2.4 GHz band may be hidden by default; log into your router’s admin page and either disable band steering or set up separate SSIDs for 2.4 GHz and 5 GHz. WPS also works if your router has a WPS push button — pick WPS on the printer’s Wireless Setup menu and press WPS on the router within two minutes. For NFC tap-to-pair, an NFC-enabled Android phone with HP Smart installed can tap the NFC logo on the front of the printer to configure Wi-Fi automatically.
How do I install the HP LaserJet Pro driver for the M426fdw?
Scroll up to the HP LaserJet Pro MFP M426fdw Drivers for Windows or HP LaserJet Pro MFP M426fdw Drivers for macOS section on this page. On Windows 11, 10, 8.1, or 8, download the PCL6 v3 Full Solution (100.01 MB), right-click the .exe, pick Run as administrator, accept the license, pick USB/Wireless/Ethernet as your connection method, and follow the prompts. On Windows 7, use the Windows 7-specific Full Drivers and Software (183.1 MB). On Vista/XP 32-bit, use the PCL6 Printer Driver with installer (150.29 MB). On macOS Mavericks 10.9 through Ventura 13, use HP Easy Start (11.42 MB) — mount the zip and run it.
How do I find the IP address on the HP LaserJet Pro MFP M426fdw?
Two easy ways. First, through the touchscreen: tap Setup > Network Setup > Wireless Settings (for Wi-Fi) or Network Setup > Ethernet (for wired) — the printer shows its IPv4 address on screen. Second, print a Network Configuration Report: tap Setup > Reports > Configuration Report and the printer outputs a page listing its IP address, MAC address, and network settings. The IP address is useful for manual driver install (point the Windows Add Printer wizard at the IP), opening the printer’s embedded web server in a browser (type the IP into the address bar for direct printer admin), or troubleshooting network connectivity.
Does the HP LaserJet Pro MFP M426fdw work on Windows 11?
Yes. HP publishes a Windows 11 (64-bit) driver for the M426fdw — the PCL6 v3 Full Solution (100.01 MB) covers Windows 11 with the full HP utility suite, and the PCL6 V4 Printer Driver “no installer” (11.15 MB) is a slim alternative that uses Microsoft’s newer PCL6 V4 driver model. Install the Full Solution for home or small business setups, or the V4 driver for lean deployments.
What toner does the HP LaserJet Pro MFP M426fdw use?
HP CF226A (26A) standard-yield (~3,100 pages) or HP CF226X (26X) high-yield (~9,000 pages). Same cartridge body, different ink capacities. For a business workload matching the 80,000-page monthly duty cycle, the 26X high-yield is the practical choice — it has about 3x the yield at a lower cost per page. Compatible third-party CF226A and CF226X cartridges are widely sold.
Does the M426fdw scan both sides of a page automatically?
Yes. The 50-sheet auto document feeder is single-pass duplex — it captures both sides of a two-sided original in one pass without flipping the page. This is a strong business feature for the price range. Enable 2-sided scan explicitly in the scan driver dialog or in HP Scan — the default can be single-sided even though the hardware supports duplex. Automatic two-sided printing is also supported through the printer’s duplex unit.
