The Brother DCP-L2640DW is a compact monochrome laser multifunction printer — print, scan, and copy from one unit, with dual-band Wi-Fi and Ethernet built in. It’s one of Brother’s current compact MFPs for home offices and small businesses, and the driver support is still fresh: a current Full Driver and Software Package for Windows 11, a macOS package that stretches from Ventura 13 up to Tahoe 26, and a full set of Linux .deb and .rpm packages covering both printer and scanner functions.
This page has every download you need for the DCP-L2640DW, plus the install flow I use when I set one of these up. I’ve also added notes on the Windows 11 install issue that trips some users up on the Full Driver Package, and the workarounds that resolve it.
🖥️Supported Operating Systems
Which driver do I need for the DCP-L2640DW?
On Windows you have several packages to choose from, and the right pick depends on what you want from the printer. The Full Driver and Software Package is the standard download. It installs the print driver, the scanner driver, the Brother Utilities hub, and the Brother iPrint&Scan desktop app. For most people this is the right pick, and it’s what Brother labels as recommended.
If you only need basic printing and scanning over USB and don’t want the full suite, the Printer Driver and Scanner Driver for USB is a smaller alternative. The standalone Printer Driver is even smaller and installs only the print function.
The BR Script, Enhanced Generic PCL, and Universal Printer Driver packages target managed-print environments where you need PostScript or PCL compatibility, or a single driver that handles multiple Brother models. For a typical home or small-office setup, stick with the Full Driver and Software Package.
Brother EasySetup is a guided wizard that walks you through unboxing, toner install, and wireless setup if you’d rather start from there instead of the standard installer.
On macOS, Brother ships a single Full Software Package that covers macOS Ventura 13 through Tahoe 26. One download, one install, and the scanner shows up alongside the printer.
On Linux, Brother publishes separate packages for the printer driver, scanner driver, Scan Key Tool, and Scanner Setting File. The Scan Key Tool is the component that routes a scan-to-PC request initiated from the Scan button on the printer to the correct Linux machine on the network.
Brother DCP-L2640DW Drivers for Windows
Full Driver and Software Package
Printer Driver and Scanner Driver for USB
Printer Driver (standalone)
BR Script Driver
Enhanced Generic PCL Driver (64-bit)
Enhanced Generic PCL Driver (32-bit)
Universal Printer Driver for BR Script
Universal Printer Driver for PCL
Brother EasySetup
Brother DCP-L2640DW Drivers for macOS
Full Software Package
Brother DCP-L2640DW Drivers for Linux
Printer Driver (deb package)
Printer Driver (rpm package)
Scanner Driver 64-bit (deb package)
Scanner Driver 64-bit (rpm package)
Scanner Driver 32-bit (deb package)
Scanner Driver 32-bit (rpm package)
Scan Key Tool 64-bit (deb package)
Scan Key Tool 64-bit (rpm package)
Scan Key Tool 32-bit (deb package)
Scan Key Tool 32-bit (rpm package)
Scanner Setting File (deb package)
Scanner Setting File (rpm package)
Before you install
A few things to line up so the install runs clean the first time.
- Sign in with a Windows account that has administrator rights. The installer prompts for elevation and will stop if it can’t get it.
- On a Mac, make sure your account can approve a system extension prompt (admin password handy).
- Connect the power cable and plug the DCP-L2640DW into a wall outlet. Don’t power it on yet. The installer will tell you when to turn it on and connect the USB cable.
- Decide whether you’re installing over USB, Wi-Fi, or Ethernet. All three work, and the installer asks early.
- Close any open print app and any previous Brother utility. The installer can’t replace a driver that’s in use.
- Pull the orange tape off the toner cartridge and the shipping locks off the paper tray before you start. The printer won’t initialize with them in place.
Install the DCP-L2640DW driver step by step
Click the download link next to the Full Driver and Software Package in the Driver files section above and save the installer to your Downloads folder. On Windows the file is a self-extracting EXE. On macOS it’s a DMG that mounts a package installer. On Linux, run the .deb or .rpm package through your distribution’s package manager.
Walk through the installer:
- Right-click the downloaded file and pick Run as administrator (Windows) or double-click the DMG and open the package (Mac).
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks. Choose USB, Wireless, or Wired Network.
- If you picked USB, connect the printer to your Mac or PC with a USB cable and turn it on when the installer tells you to.
- If you picked Wireless, make sure the printer and your computer are on the same Wi-Fi network. The DCP-L2640DW supports both 2.4 GHz and 5 GHz, so either band works as long as the printer and PC are on the same one.
- If you picked Wired Network, connect an Ethernet cable between the printer and your router or switch. The installer finds the printer by IP address.
- Let the installer finish. The Full Driver Package is around 286 MB, so the extract-and-install step takes several minutes on a typical machine.
- When install completes, print a test page from the driver properties dialog and run a test scan from Brother iPrint&Scan to confirm both functions work.
On Linux, install the packages in this order: Printer Driver first, then Scanner Driver, then Scan Key Tool, then Scanner Setting File. Pick the .deb or .rpm variant that matches your distribution, and the 32-bit or 64-bit variant that matches your architecture.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The Brother DCP-L2640DW should appear in the list.
- Print a test page from the printer properties dialog. If the page comes out blank, check that the toner cartridge is seated correctly and the orange shipping tape is fully removed.
- Open Brother iPrint&Scan and run a test scan. The scanner should appear and complete a scan to PDF or JPEG without errors.
- Check the LCD on the DCP-L2640DW. If the display shows an error message, cross-reference it against the Known issues section below or consult the Brother manual.
Print and scan from your phone or tablet
The DCP-L2640DW supports AirPrint on iPhone and iPad, which means you can print directly from Photos, Mail, Safari, or any iOS app with a Share sheet. Make sure the DCP-L2640DW and your iPhone are on the same Wi-Fi network.
For Android, Brother iPrint&Scan handles both printing and scanning. Download it from Google Play, point it at your DCP-L2640DW on the same Wi-Fi network, and it picks the printer up. BrotherMobileConnect is Brother’s newer mobile app, and Mopria Print Service is a third option for Android devices that support it.
Wi-Fi Direct is built into the DCP-L2640DW, which lets your phone print even when there’s no existing Wi-Fi network — the printer broadcasts its own network and your phone connects directly.
If install fails
Windows 11 is where most install trouble lands on the Full Driver Package. The workarounds below cover the common failure modes, in the order I’d try them.
- Full Driver Package installer fails to launch or hangs on Windows 11. Users on the Microsoft Q&A thread report errors like “The application was unable to start correctly (0xc00000e5)” when the installer refuses to run. The resolved fix is a full clean-uninstall sequence. Uninstall any existing Brother iPrint&Scan from Apps > Installed apps. Open Brother Utilities from Desktop or All Programs, click Tools on the left menu, choose Uninstall, and repeat for every model listed in the model selector. Reboot. Then re-download the latest Full Driver and Software Package and run it from a local folder.
- Install under a new user account. Users on the Microsoft Q&A thread report success installing Brother software under a fresh Windows user account. Create a new user on the computer, log in as that user, install the Full Driver Package, and choose “install for all users” during setup. You can delete the temporary user profile afterward — the software remains installed for all accounts.
- Add the printer via network discovery (bypasses the installer). If the Full Driver Package won’t install but you still need to print, connect the DCP-L2640DW to your Wi-Fi network through the printer’s own setup menu. Then open Windows Settings > Bluetooth & devices > Printers & scanners, click Add device, and Windows discovers the printer on the network and installs a basic driver automatically. You lose the Brother iPrint&Scan scanner functions with this route, but printing works.
- Printer not detected over USB. Try a different USB port, prefer a direct port on the computer over a hub, and swap the cable if you have a spare. Confirm that the Ready message appears on the LCD before clicking Next in the installer.
- Previous Brother driver stuck. Open Settings > Printers & scanners, remove any older DCP-L2640DW entries, then open Apps > Installed apps and uninstall Brother iPrint&Scan, Brother Utilities, and any other Brother component. Reboot, then rerun the installer.
- Wireless install can’t find the printer. Make sure the printer and your PC are on the same Wi-Fi network. On dual-band routers, the DCP-L2640DW can sit on 2.4 GHz while your PC runs on 5 GHz — the installer still finds the printer because the router bridges the two bands, but if your router uses client isolation, discovery breaks. Disable client isolation for setup or use a wired Ethernet connection to the printer instead.
If the scanner doesn’t work after install
- Scanner missing from Brother iPrint&Scan. Open Brother iPrint&Scan, click the printer selector at the top, and pick the DCP-L2640DW explicitly. The app sometimes defaults to an older Brother model if you have one installed previously.
- Windows Scan or Image Capture doesn’t see the scanner. Confirm the scanner driver installed by opening Device Manager (Windows) and looking under Imaging Devices for the DCP-L2640DW entry. If it’s missing, run the Full Driver and Software Package again — the standalone Printer Driver package doesn’t install the scanner component.
- Scan to PC button on the printer doesn’t trigger a scan on Windows. Open Brother iPrint&Scan, go to Scan Settings, and enable “Scan to PC” destination for your computer. The printer needs to know which PC on the network should receive the scan.
- On Linux, Scan button doesn’t route to the PC. The Scan Key Tool handles this. Install the Scan Key Tool package that matches your architecture (32-bit or 64-bit) after the Scanner Driver, and restart the tool’s service.
Known issues with the DCP-L2640DW
Full Driver and Software Package install failures on Windows 11. Users on the Microsoft Q&A thread report that the Full Driver installer sometimes fails to launch at all, or fails with a startup error. The thread documents two user-verified workarounds: the Brother clean-uninstall sequence followed by a fresh install, and installing under a new Windows user account with “install for all users” selected. If neither works, the network discovery route adds the printer without running the Full Driver Package, at the cost of losing iPrint&Scan scanner functions.
Dual-band Wi-Fi band mismatch. The DCP-L2640DW supports both 2.4 GHz and 5 GHz, but on some routers the installer discovers the printer on one band while your PC sits on the other. If discovery hangs, connect your PC to the same band the printer is on, or use Ethernet for the install and let Wi-Fi settle afterward.
Scanner interpolated resolution is Windows-only. Brother’s spec sheet lists 19,200 × 19,200 dpi interpolated scan resolution, but that enhancement runs through the Windows scanner driver only. On macOS and Linux, you’re working with the hardware optical resolution, which is lower.
Toner cartridge options. The DCP-L2640DW uses the TN830 family — TN830 standard, TN830XL high-yield, and TN830V value variants, with a TN830XL 2PK twin pack available for bulk buyers. The drum unit is DR830 (separate consumable, longer life than toner).
How to fully uninstall the DCP-L2640DW driver
On Windows:
- Open Settings > Printers & scanners and remove the Brother DCP-L2640DW entry.
- Open Brother Utilities from the Desktop or All Programs, click Tools on the left menu, and choose Uninstall. Repeat for every Brother model listed in the model selector.
- Open Settings > Apps > Installed apps and uninstall Brother iPrint&Scan and any remaining Brother components.
- Reboot.
- For a true clean wipe before a fresh install, use Driver Store Explorer (RAPR) to remove the Brother driver package from the Windows driver store.
On macOS:
- Open System Settings > Printers & Scanners and remove the DCP-L2640DW.
- Mount the original Full Software Package DMG you used to install and run the Uninstaller inside it if present. Brother driver files on macOS live under
/Library/Printers/Brother/and can be removed manually if the Uninstaller isn’t available. - Restart the Mac.
On Linux:
- Remove the printer queue through your distribution’s print settings or
lpadmin -x. - Uninstall the Brother packages through your package manager: on Debian/Ubuntu,
sudo apt removefollowed by the package names; on Fedora/RHEL,sudo dnf remove. - Remove packages in reverse order: Scanner Setting File, Scan Key Tool, Scanner Driver, Printer Driver.
Brother DCP-L2640DW at a glance
| Spec | Value |
|---|---|
| Print technology | Monochrome laser |
| Functions | Print, scan, copy (no fax) |
| Print speed | Up to 36 pages per minute |
| Max print resolution | 1200 x 1200 dpi |
| Scan resolution | 600 x 600 dpi optical; 19200 x 19200 dpi interpolated (Windows only) |
| Copy resolution | 600 x 600 dpi |
| Duplex printing | Automatic two-sided |
| Connections | Hi-Speed USB 2.0, Dual-band Wi-Fi (802.11 b/g/n 2.4 GHz + 802.11 a/n 5 GHz), Ethernet, Wi-Fi Direct |
| Mobile printing | AirPrint, BrotherMobileConnect, Brother iPrint&Scan, Mopria, Wi-Fi Direct |
| Windows support | 11, 10 (32-bit and 64-bit per variant) |
| macOS support | Ventura 13 through Tahoe 26 |
| Linux support | Yes — printer driver, scanner driver, Scan Key Tool (both .deb and .rpm, 32-bit and 64-bit) |
| Toner cartridge | TN830 standard, TN830XL high-yield, TN830V value, TN830XL 2PK twin pack |
| Drum unit | DR830 |
| Dimensions | 16.1 x 15.7 x 12.5 inches |
| Weight | 25 lb |
Frequently Asked Questions
Where can I download the Brother DCP-L2640DW driver software?
Scroll up to the Driver files section on this page. The Full Driver and Software Package for Windows (285.73 MB) covers Windows 11 and 10 with print, scan, and the Brother iPrint&Scan utility in a single installer. The Full Software Package for macOS (24.05 MB) covers macOS Ventura 13 through Tahoe 26. Linux users will find both .deb and .rpm packages in the Linux section. Every file on this page is the current Brother-released driver, with no signup walls or bundled toolbars.
How do I connect my Brother DCP-L2640DW to my computer?
Three options. USB: connect the cable between the printer and your PC when the Full Driver installer prompts you. Wi-Fi: pick Wireless during the installer, and the DCP-L2640DW connects over 2.4 GHz or 5 GHz. Ethernet: plug a cable between the printer and your router or switch, pick Wired Network during the installer, and the installer finds the printer by IP. Wi-Fi Direct is also available if you need to print without a Wi-Fi network at all.
Do I need to install a driver for the Brother DCP-L2640DW?
For basic printing, Windows and macOS can often add the DCP-L2640DW through built-in printer discovery without a Brother driver, giving you a functional print queue. For scanning, Brother utilities, and full feature access, you need the Full Driver and Software Package — AirPrint on iOS and Windows’s built-in driver don’t expose the scanner functions.
How do I install the DCP-L2640DW driver on Windows 11?
Download the Full Driver and Software Package from the Driver files section above, right-click the EXE, and pick Run as administrator. Accept the license, pick USB, Wireless, or Wired Network, and follow the prompts. If the installer fails to launch on Windows 11 — users on the Microsoft Q&A thread report this specifically — try the clean-uninstall sequence or install under a new Windows user account as described in the “If install fails” section above.
Does the DCP-L2640DW work on macOS Tahoe 26?
Yes. Grab the Full Software Package for macOS from the Driver files section above. The same package covers Ventura 13, Sonoma 14, Sequoia 15, and Tahoe 26.
Can I use the DCP-L2640DW on Linux?
Yes. Brother publishes a model-specific printer driver as a .deb and .rpm package, plus scanner driver packages for 32-bit and 64-bit, plus the Scan Key Tool and Scanner Setting File. Install the printer driver first, then the scanner driver, then the Scan Key Tool, then the Scanner Setting File. All downloads are in the Linux section above.
What toner cartridge does the DCP-L2640DW use?
The DCP-L2640DW uses the Brother TN830 toner family. The TN830 is the standard yield, TN830XL is the high-yield version, TN830V is the value variant, and TN830XL 2PK is a twin pack of high-yield cartridges. The drum unit is the DR830, which is a separate consumable with a longer life than the toner itself.
