The Epson EcoTank ET-3850 is a compact home and small-office all-in-one — print, scan, and copy from one unit — with Epson’s refillable ink tank system, automatic duplex printing, a 30-sheet ADF, and an Ethernet port alongside Wi-Fi. It steps up from the smaller ET-2850 on every network and paper-handling spec that matters for shared use, while running the same Epson 522 ink bottles. Driver support is in good shape on current Windows and macOS, with a single Combo Package that fetches the right components for your OS version.
This page has every download for the ET-3850, plus the install flow I use when I set one of these up. I’ve also added notes on the EcoTank first-fill procedure (it takes about 15 minutes and there’s no skipping it) and the 30-sheet ADF, which handles small-batch scanning but has a few loading habits worth knowing.
🖥️Supported Operating Systems
![]()
![]()
Which driver do I need for the EcoTank ET-3850?
On Windows you have a few options, and the right pick depends on what you want from the printer. The Drivers and Utilities Combo Package is the small recommended installer (13.48 MB). It fetches and installs the right components for your Windows version — print driver, scanner driver, Epson Scan 2, and the Epson status utility — in one go. For most people this is the right pick.
If you want the standalone print driver only, the Printer Driver packages (64-bit and 32-bit variants) install just the print component without the scanner driver or utilities. For scanning, a separate Scanner Driver and Epson Scan 2 package covers just that function.
The Remote Print Driver is Epson’s cloud print option — it lets you send print jobs to the ET-3850 over the internet by email through the Epson Connect service. Grab it only if remote printing fits your workflow.
On macOS, Epson ships the same four components as separate packages: the small Combo Package Installer that fetches everything, plus standalone Printer Driver, Scanner Driver, and Remote Print Driver packages if you want to install only one piece.
Epson EcoTank ET-3850 Drivers for Windows
Epson EcoTank ET-3850 Drivers for macOS
Before you install
A few things to line up so the install runs clean the first time.
- Sign in with a Windows account that has administrator rights. The installer prompts for elevation and will stop if it can’t get it.
- On a Mac, make sure your account can approve a system extension prompt (admin password handy).
- Unbox the ET-3850, remove all orange protective tape, and set it in its final location before you start the install. The initial ink fill needs the printer level and still.
- Have the four Epson 522 ink bottles ready (black, cyan, magenta, yellow). Fresh EcoTanks ship with the first set of bottles in the box.
- Connect the power cable. Don’t start the ink fill or the driver install until you’ve decided on your connection method.
- Decide whether you’re installing over USB, Wi-Fi, or Ethernet. The ET-3850 supports all three.
- Close any open print app and any previous Epson utility. The installer can’t replace a driver that’s in use.
Install the EcoTank ET-3850 driver step by step
The EcoTank setup has two parts: the initial ink fill on the printer itself (one-time, about 15 minutes), and the driver install on your computer. Do the ink fill first — the printer won’t accept print jobs until it’s complete.
Ink fill (one-time, on the printer):
- Power on the ET-3850. The 2.4-inch color LCD walks you through setup prompts — language, region, time zone.
- When the display asks, open the ink tank cover, remove the cap from the first bottle (black), and snap it into the matching tank port. Epson’s bottle design keys to the correct color, so black won’t fit into the cyan tank even if you try.
- Squeeze the bottle gently; the ink flows on its own until the tank fills. Don’t rush it.
- Repeat for cyan, magenta, and yellow bottles. Close the tank cover when all four are filled.
- The printer runs an internal ink distribution cycle — about 15 minutes. The color LCD shows a progress indicator. Don’t power off or disconnect during this time.
Driver install (on your computer):
- Click the download link next to the Combo Package in the Driver files section above and save the installer to your Downloads folder.
- Right-click the downloaded file and pick Run as administrator (Windows) or double-click the DMG and open the package (Mac).
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks. Choose USB cable, Wireless, or Wired Network.
- If you picked USB, connect the printer to your Mac or PC with a USB cable.
- If you picked Wireless, make sure the printer and your computer are on the same Wi-Fi network.
- If you picked Wired Network, connect an Ethernet cable between the printer and your router or switch. The installer finds the printer by IP address.
- Let the installer finish and run the test page it offers.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The Epson EcoTank ET-3850 should appear in the list.
- Print a test page from the printer properties dialog. If the color looks off, run a nozzle check from the Epson utility — the first prints after a fresh fill can show streaks that settle after a cleaning cycle.
- Open Epson Scan 2 and run a test scan. Try one scan from the flatbed and one from the ADF to confirm both paths work.
- Check the 2.4-inch color LCD on the printer. The home screen confirms the printer is online.
- If you plan to use Ethernet, confirm the network connection on the printer’s LCD under the Wi-Fi/Network status menu — a wired connection should show as active.
Print and scan from your phone or tablet
The ET-3850 supports AirPrint on iPhone and iPad for direct printing from Photos, Mail, Safari, or any iOS app with a Share sheet. Make sure the ET-3850 and your iPhone are on the same Wi-Fi network.
For Android, the Epson Smart Panel app handles both printing and scanning. Download it from Google Play, point it at your ET-3850 on the same Wi-Fi network, and it picks the printer up. Mopria Print Service is a third option for Android devices that support it.
If you installed the Remote Print Driver on your desktop, you can also send print jobs to the ET-3850 over the internet by email through the Epson Connect service — useful if you print from outside the house or want to forward documents to the printer remotely.
If install fails
Here are the common failure modes and the fixes that resolve them, in the order I’d try them.
- Installer closes silently or hangs on Windows 11. Run the installer through Windows compatibility mode. Right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for”. Try Windows 10 first. If it still fails, step down to Windows 8 and Windows 7. Save after each change and run the installer as administrator each time.
- Printer not detected over USB. Try a different USB port, prefer a direct port on the computer over a hub, and swap the cable if you have a spare. The ET-3850’s USB port is on the back — confirm it’s seated fully. Check that the home screen appears on the color LCD before clicking Next in the installer.
- Printer not detected over Ethernet. Confirm the printer got an IP address by checking the network status on the color LCD menu. If the IP section is blank or shows 0.0.0.0, check the Ethernet cable, the router port, and that DHCP is enabled on the router.
- Wireless install can’t find the printer. Make sure your PC and the printer are on the same Wi-Fi network. If your router runs band steering and the ET-3850 sits on one band while your PC sits on the other, discovery can break — connect your PC to the same band the printer joined, or fall back to Ethernet for setup.
- Printer stuck in “initializing” after ink fill. The first-fill cycle takes about 15 minutes — wait for it to complete fully before you start the driver install. If more than 20 minutes have passed and the LCD still shows an initialization message, power off the printer, wait 30 seconds, and power it back on to retry the cycle.
- Previous Epson driver stuck. Open Settings > Printers & scanners, remove any older ET-3850 or Epson entries, then open Apps > Installed apps and uninstall Epson Scan 2 and any Epson utility tied to the ET-3850. Reboot, then rerun the installer.
- Blank pages after a refill. After topping up ink bottles, the print head may need a cleaning cycle. Run Head Cleaning from the Epson utility on your PC or from the printer’s maintenance menu on the color LCD. Two cleaning cycles usually clear it; run a nozzle check between cycles to confirm.
If the scanner doesn’t work after install
- Scanner missing from Epson Scan 2. Open Epson Scan 2, click Select Scanner at the top, and pick the ET-3850 explicitly. The app sometimes defaults to an older Epson model if you have one installed previously.
- Windows Scan or Image Capture doesn’t see the scanner. Confirm the scanner driver installed by opening Device Manager (Windows) and looking under Imaging Devices for the ET-3850 entry. If it’s missing, install the standalone Scanner Driver and Epson Scan 2 Utility package separately.
- ADF picks up multiple sheets at once. The 30-sheet ADF works best with standard 20 lb bond paper. Thin or curled pages can double-feed. Flex the stack before loading, keep the pages below the fill line on the ADF guides, and remove any staples or paper clips.
- ADF scans show skew or crooked lines. Check that the paper guides on the ADF tray are snug against the paper stack. If skew persists, try scanning from the flatbed instead for critical pages.
- Scan button on the printer doesn’t trigger a scan. The ET-3850’s Scan button needs a destination configured on your PC. Open Epson Scan 2 on your computer, set the destination type, and save the profile.
Known issues with the EcoTank ET-3850
First-fill ink distribution takes about 15 minutes. New EcoTank printers need a one-time internal priming cycle after the tanks are filled for the first time. The color LCD shows a progress indicator — don’t power off or disconnect the printer during this cycle. This is normal and only happens once.
ADF handles small batches, not stacks of mixed paper. The 30-sheet ADF is built for consistent letter or A4 bond — mixed sizes, thin paper, folded or stapled pages, or glossy originals can cause feed failures. For anything out of the ordinary, use the flatbed instead.
Automatic duplex slows down print speed. The ET-3850 pauses between sides to let the ink dry before flipping the page. On heavy-ink pages with lots of color, the second side can still smudge if the paper is light — step up to 24 lb or heavier paper for a cleaner duplex result.
Blank pages after a refill. After topping up ink bottles, the print head may need a cleaning cycle to re-prime. Run Head Cleaning from the Epson utility, then a nozzle check to confirm. This is standard EcoTank maintenance, not a driver issue.
The ET-3850 vs ET-2850 vs ET-4850 lineup. The ET-2850 is the budget sibling without ADF, Ethernet, or automatic duplex. The ET-3850 adds all three plus a larger color LCD. The ET-4850 is the top of the compact EcoTank line and adds fax to the ET-3850’s feature set. All three use the same Epson 522 ink bottles.
How to fully uninstall the EcoTank ET-3850 driver
On Windows:
- Open Settings > Printers & scanners and remove the Epson EcoTank ET-3850 entry.
- Open Settings > Apps > Installed apps and uninstall Epson Printer Driver, Epson Scan 2, Epson Software Updater, and any other Epson component tied to the ET-3850.
- Reboot.
- For a true clean wipe before a fresh install, open Driver Store Explorer (RAPR), filter by Epson, and remove the ET-3850 driver package from the Windows driver store.
On macOS:
- Open System Settings > Printers & Scanners and remove the ET-3850.
- Mount the original Combo Package DMG you used to install and run the Uninstaller inside it if present. Epson driver files on macOS live under
/Library/Printers/EPSON/and/Library/Image Capture/Devices/and can be removed manually. - Restart the Mac.
Epson EcoTank ET-3850 at a glance
| Spec | Value |
|---|---|
| Release year | 2020 |
| Print technology | Inkjet with refillable ink tank (EcoTank) |
| Functions | Print, scan, copy (no fax — ET-4850 adds fax) |
| Print speed | Up to 15 pages per minute black, 8 pages per minute color |
| Max print resolution | 4800 x 1200 optimized dpi |
| Duplex printing | Automatic two-sided |
| Document feeder | 30-sheet ADF |
| Display | 2.4-inch color LCD |
| Connections | Hi-Speed USB 2.0, Wi-Fi, Ethernet (RJ-45), Wi-Fi Direct |
| Mobile printing | AirPrint, Epson Smart Panel, Mopria, Epson Remote Print |
| Windows support | 11, 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit per variant) |
| macOS support | Mac OS X 10.6 Snow Leopard through macOS Sequoia 15 |
| Linux support | Yes, via epson-inkjet-printer-escpr package |
| Ink bottles | Epson 522 series — black, cyan, magenta, yellow (4 bottles) |
| Weight | About 5.9 kg (13 lb) |
| Dimensions | 375 x 347 x 179 mm (14.8 x 13.7 x 7.0 inches) |
Frequently Asked Questions
Where can I download the Epson EcoTank ET-3850 driver software?
Scroll up to the Driver files section on this page. The Drivers and Utilities Combo Package Installer for Windows (13.48 MB) is Epson’s recommended download — it fetches and installs the print driver, scanner driver, Epson Scan 2, and the Epson status utility in one go. The macOS Combo Package (14.40 MB) covers Mac OS X Lion 10.7 through macOS Sequoia 15. All downloads on this page are the current Epson-released files, with no signup walls or bundled toolbars.
How do I install the Epson ET-3850 drivers on my computer?
Download the Drivers and Utilities Combo Package from the Driver files section above, right-click the EXE, and pick Run as administrator. Accept the license, pick USB, Wireless, or Wired Network when the installer asks, and follow the prompts. The full flow takes a few minutes. Make sure the first-fill ink procedure is complete on the printer before you start the driver install — the printer won’t accept print jobs until the initial ink distribution cycle finishes.
How do I connect the Epson ET-3850 to my computer?
Three options. USB: connect the cable between the printer and your PC when the Combo Package installer prompts you. Wi-Fi: pick Wireless during the installer, confirm the printer and your PC are on the same network. Ethernet: plug a cable between the printer and your router or switch, pick Wired Network during the installer, and the installer finds the printer by IP. The ET-3850 supports all three — pick whichever fits your setup.
Can I scan from the ET-3850 to my computer?
Yes. The scanner driver installs alongside the print driver when you run the Combo Package. For software-driven scans, use Epson Scan 2 on the desktop or the Epson Smart Panel app on mobile. For hardware-driven scans from the printer’s Scan button, configure a destination through Epson Scan 2 on your PC first — the printer needs to know which computer should receive the scan. The 30-sheet ADF handles multi-page scan jobs; use the flatbed for single pages, photos, or mixed-size originals.
Is the ET-3850 driver free to download?
Yes. All ET-3850 driver files are free. No signup, no payment, no account required.
Does the ET-3850 driver work on macOS Sequoia 15?
Yes. Grab the Drivers and Utilities Combo Package Installer for macOS (14.40 MB) from the Driver files section above. The same package covers macOS Sequoia 15 and every earlier macOS release down to Mac OS X Lion 10.7.
How long does the first-fill ink procedure take on the ET-3850?
About 15 minutes. After you fill the four Epson 522 bottles into the matching tanks, the printer runs an internal ink distribution cycle that primes the print head. The 2.4-inch color LCD shows a progress indicator. Don’t power off or disconnect the printer during the cycle — it only happens once, and interrupting it can leave the print head partially primed.
Can I use the ET-3850 on Linux?
Yes. Install Epson’s epson-inkjet-printer-escpr package through your distribution’s package manager — on Debian and Ubuntu, sudo apt install printer-driver-escpr; on Arch via AUR, yay -S epson-inkjet-printer-escpr. For scanning on Linux, install epsonscan2 plus the non-free plugin.
