Brother MFC-L8900CDW Driver Download

The Brother MFC-L8900CDW is a business-class color laser multifunction printer built for small to mid-size workgroups. It prints at 33 pages a minute in both black and color at 2400 x 600 dpi, scans both sides of a page in one pass through a 70-sheet automatic document feeder, and ships with a color touchscreen, Gigabit Ethernet, Wi-Fi, NFC badge authentication, and built-in BR-Script 3 (PostScript 3) emulation. Driver support covers Windows 11, Windows 10, 8.1, 8, and 7, plus macOS Yosemite 10.10 through Sonoma 14, and Linux through Brother-published deb and rpm packages.

This page has every current driver file for the MFC-L8900CDW, plus the install flow I use for first-time setup, notes on the macOS situation where modern versions (Sequoia 15 and later) rely on AirPrint since Brother stopped publishing updated drivers, and a Linux section covering the older CUPSwrapper + LPR architecture this printer uses.

🖥️Supported Operating Systems

Windows

Windows11 (64-bit), 10, 8.1, 8, 7 (32-bit and 64-bit)

macOS

macOSSonoma 14, Ventura 13, Monterey 12, Big Sur 11, Catalina 10.15, Mojave 10.14, High Sierra 10.13, Sierra 10.12, El Capitan 10.11, Yosemite 10.10

Linux

Linux32-bit and 64-bit (deb and rpm packages)

Which driver do I need for the MFC-L8900CDW?

Brother ships two Windows downloads, several macOS downloads (one per macOS era), and a handful of Linux component packages.

On Windows, the Full Driver and Software Package (368.04 MB) is the standard download — it installs the print driver, scanner driver, PC fax driver, Brother iPrint&Scan, the Status Monitor, Brother Utilities, and all supporting software in one go. Covers Windows 11 through Windows 7. For a lighter install over USB without the full suite, the Printer and Scanner Driver for Local Connection (37.06 MB) covers print + scan only.

On macOS, the driver situation depends on your macOS version. For macOS Yosemite 10.10 through Catalina 10.15, download the Printer Driver (25.90 MB) plus the matching ICA Scanner Driver for your macOS version. For Mojave 10.14 and for Yosemite 10.10 through High Sierra 10.13, Brother ships Full Software Packages (337 MB each) that include everything. For Big Sur 11 through Sonoma 14, only the ICA Scanner Driver is needed — printing on modern macOS goes through AirPrint, which doesn’t require a separate driver install.

On Linux, Brother uses the older CUPSwrapper + LPR Printer Driver split (both must be installed for printing), plus a separate Scanner Driver (32-bit or 64-bit matching your architecture), and a PC FAX Driver for computer-side faxing.

Brother MFC-L8900CDW Drivers for Windows

Printer and Scanner Driver for Local Connection

Windows 11 (64-bit), Windows 10, 8.1, 8, 7 (32-bit and 64-bit)

38.86 MBDownload

Brother MFC-L8900CDW Drivers for macOS

ICA Scanner Driver (macOS 12)

macOS Monterey 12 — Print via AirPrint

2.65 MBDownload

ICA Scanner Driver (macOS 11)

macOS Big Sur 11 — Print via AirPrint

2.62 MBDownload

Printer Driver (OS X 10.10 to macOS 10.15)

macOS Catalina 10.15 down to Yosemite 10.10

27.16 MBDownload

ICA Scanner Driver (macOS 10.15)

macOS Catalina 10.15

2.4 MBDownload

Full Software Package (macOS 10.14)

macOS Mojave 10.14

353.93 MBDownload

Scanner Driver (macOS 10.14)

macOS Mojave 10.14 (standalone scanner-only)

307.33 MBDownload

Full Software Package (OS X 10.10 to macOS 10.13)

OS X Yosemite 10.10 through macOS High Sierra 10.13

354.08 MBDownload

Scanner Driver (OS X 10.10 to macOS 10.13)

OS X Yosemite 10.10 through macOS High Sierra 10.13 (standalone)

307.47 MBDownload

Brother MFC-L8900CDW Drivers for Linux

LPR Printer Driver (deb package)

Debian, Ubuntu, Mint — Install first, before CUPSwrapper

1.43 MBDownload

CUPSwrapper Printer Driver (rpm package)

Fedora, RHEL, openSUSE — Install after LPR driver

16.09 KBDownload

LPR Printer Driver (rpm package)

Fedora, RHEL, openSUSE — Install first, before CUPSwrapper

1.42 MBDownload

Scanner Driver 64-bit (deb package)

Debian, Ubuntu, Mint (64-bit)

111.25 KBDownload

Scanner Driver 64-bit (rpm package)

Fedora, RHEL, openSUSE (64-bit)

119.02 KBDownload

Scanner Driver 32-bit (deb package)

Debian, Ubuntu, Mint (32-bit)

92.73 KBDownload

Scanner Driver 32-bit (rpm package)

Fedora, RHEL, openSUSE (32-bit)

100.45 KBDownload

PC FAX Driver (deb package)

Debian, Ubuntu, Mint

39.22 KBDownload

PC FAX Driver (rpm package)

Fedora, RHEL, openSUSE

46.24 KBDownload

Before you install

A few checks before running the installer save time later.

  • Sign in to Windows or macOS with an account that has administrator rights.
  • Plug the MFC-L8900CDW’s power cable into a wall outlet but leave the printer off. The installer asks you to power it on at the right moment.
  • Decide whether you’re setting up over USB, Wi-Fi, or Gigabit Ethernet. For a business-tier color laser, wired Gigabit is the recommended path — Cat5e or Cat6 to a switch or router gets full network speed.
  • Remove the orange shipping tape from each of the four toner cartridges (black, cyan, magenta, yellow) before powering on.
  • If you plan to use fax, have the phone line ready to plug into the LINE jack on the back.
  • For NFC badge authentication, have a compatible badge ready to enroll.

Install the MFC-L8900CDW driver step by step on Windows

Click the download link next to the Full Driver and Software Package in the Driver files section above and save the installer to your Downloads folder.

  1. Right-click the downloaded file and pick Run as administrator.
  2. Accept the license agreement when the first screen asks.
  3. Pick your connection method when the installer asks: USB, Wireless, or Wired Network.
  4. If you picked USB, connect the printer to your computer with a USB cable and power the printer on when the installer tells you to.
  5. If you picked Wireless, the installer walks you through picking your Wi-Fi network on the printer’s touchscreen. The MFC-L8900CDW’s Wi-Fi radio is 2.4 GHz only — make sure your router has a 2.4 GHz SSID the printer can see. Tap Settings > Network > WLAN > Setup Wizard and pick your SSID.
  6. If you picked Wired Network, connect a Cat5e or Cat6 Ethernet cable between the printer’s Gigabit Ethernet port and your router or switch. The installer finds the printer by IP address.
  7. Let the installer finish — the Full Package registers the print driver, scan driver, PC fax driver, Brother iPrint&Scan, and the Status Monitor.
  8. When install completes, print a color test page from the driver properties dialog and run a test scan to confirm both paths work.

Install the MFC-L8900CDW driver on macOS

The right macOS install flow depends on your macOS version.

On macOS Big Sur 11 through macOS Sonoma 14: use AirPrint for printing (no driver install needed — the printer shows up automatically in System Settings > Printers & Scanners once it’s on the same network). For scanning, download the ICA Scanner Driver that matches your macOS version from the Driver files section above. The ICA driver registers the scanner with macOS Image Capture.

On macOS Catalina 10.15: download the Printer Driver (25.90 MB) and the ICA Scanner Driver for 10.15 separately. Install both DMG files.

On macOS Mojave 10.14: download the Full Software Package for 10.14 (337.53 MB) — it includes print, scan, and supporting software in one install.

On OS X Yosemite 10.10 through macOS High Sierra 10.13: download the Full Software Package for 10.10 to 10.13 (337.68 MB).

For any macOS version, run the DMG installer, accept the license, and let the installer register the driver with macOS. Run a test print and test scan from the printer properties dialog or Image Capture app.

Install the MFC-L8900CDW driver on Linux

The MFC-L8900CDW uses Brother’s older Linux driver architecture — two separate printer packages (LPR + CUPSwrapper) that must be installed in order.

For printing on Debian, Ubuntu, or Mint, install LPR first, then CUPSwrapper:

sudo dpkg -i mfcl8900cdwlpr-*.deb
sudo dpkg -i mfcl8900cdwcupswrapper-*.deb

On Fedora, RHEL, or openSUSE:

sudo rpm -ihv --nodeps mfcl8900cdwlpr-*.rpm
sudo rpm -ihv --nodeps mfcl8900cdwcupswrapper-*.rpm

Order matters — the CUPSwrapper package depends on the LPR package being installed first. Add the printer through your desktop’s print settings — Settings > Printers > Add Printer, pick the MFC-L8900CDW from the list.

For scanning, install the scanner driver matching your architecture:

sudo dpkg -i brscan4-*.deb          # 64-bit (deb)
# or
sudo rpm -ihv --nodeps brscan4-*.rpm   # 64-bit (rpm)

Test the scanner with scanimage -L — the MFC-L8900CDW should appear in the SANE device list. Open Simple Scan or your preferred SANE app to run a test scan.

For PC FAX from Linux, install the PC FAX driver:

sudo dpkg -i brmfcl8900cdwpcfax-*.deb

What to check after install

  • Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The MFC-L8900CDW should appear in both printer and scanner lists.
  • Print a color test page. First page out is around 15 seconds from standby.
  • Run a test scan from the ADF with a two-sided original — the MFC-L8900CDW’s 70-sheet ADF scans both sides in one pass at up to 58 ipm.
  • Test the legal-size flatbed glass with a legal-size original to confirm the full scan area is available.
  • If you set up fax, send a test fax from the touchscreen.
  • For NFC badge authentication, enroll a badge through the touchscreen under Settings > General Setup > Secure Function Lock (menu path varies by firmware).

Print and scan from your phone or tablet

The MFC-L8900CDW supports AirPrint for iPhone and iPad on the same Wi-Fi network. Brother iPrint&Scan handles mobile scanning on both iOS and Android — install the app from the App Store or Google Play.

Wi-Fi Direct lets your phone connect directly to the printer without a router — enable it from the Network menu on the touchscreen.

NFC gives Android devices a tap-to-print path — hold an NFC-capable phone near the NFC reader on the printer’s control panel to pair.

If install fails

The checks below cover the common failure modes, in the order I’d try them.

  • Full Driver Package install fails on Windows 11. Delete the downloaded installer and re-download it — 368 MB is a large file and a bad download is the most common cause. If re-download doesn’t fix it, try the smaller Printer and Scanner Driver for Local Connection (37.06 MB) as a fallback for USB-connected setups.
  • Wi-Fi install can’t find the printer. The MFC-L8900CDW is 2.4 GHz only — if your PC sits on 5 GHz, Wi-Fi discovery fails because the printer can’t see the PC’s band. Switch the PC to the 2.4 GHz SSID temporarily, or use Gigabit Ethernet for the install.
  • Printer not found over USB. Switch to a different USB port — prefer a direct port on the computer over a hub, and swap the cable if you have a spare.
  • Scanner not showing up on macOS Big Sur or later. The scanner driver on modern macOS is the ICA Scanner Driver — a separate download from the printing path (which goes through AirPrint). If you only added the printer via AirPrint, scanning won’t work until you install the ICA Scanner Driver matching your macOS version.
  • Linux print spool stuck. If print jobs sit in the queue without printing, the CUPSwrapper package likely installed before the LPR package. Reinstall LPR first, then CUPSwrapper, in that order.
  • Compatibility mode for legacy Windows. On Windows 7 or 8, if the installer fails to launch, right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for Windows 7”.

Known issues with the MFC-L8900CDW

macOS Sequoia 15 and macOS Tahoe 26 — no updated driver. Brother hasn’t published updated drivers for macOS Sequoia 15 or Tahoe 26. The macOS Sonoma 14 ICA Scanner Driver may install on newer macOS, but scan behavior isn’t guaranteed. For printing on modern macOS, AirPrint handles basic print jobs without any driver install — go to System Settings > Printers & Scanners > Add Printer and pick the MFC-L8900CDW from the network list.

Wi-Fi is 2.4 GHz only. The MFC-L8900CDW’s 802.11 b/g/n radio doesn’t support 5 GHz. Modern routers that default to band steering can land the PC and printer on different bands, blocking discovery. Pick a Wi-Fi network that exposes the 2.4 GHz SSID separately, or use Gigabit Ethernet for the install step.

Linux uses older CUPSwrapper + LPR architecture. Unlike newer Brother models that use the brscan5 unified structure, the MFC-L8900CDW relies on the older Brother Linux split (LPR driver + CUPSwrapper on top). Install order matters — LPR first, then CUPSwrapper — or the queue won’t process jobs.

Toner cost is the color laser trade-off. The MFC-L8900CDW uses four separate toner cartridges (TN431/TN433 in Black, Cyan, Magenta, Yellow). Running out of one color blocks color printing until replaced, even if the other three are full. The TN433 high-yield options cut cost-per-page for heavy workloads.

How to fully uninstall the MFC-L8900CDW driver

On Windows:

  1. Open Settings > Printers & scanners and remove the Brother MFC-L8900CDW entry.
  2. Open Settings > Apps > Installed apps and uninstall Brother iPrint&Scan and any other Brother component tied to the MFC-L8900CDW.
  3. Open Brother Utilities if installed, click Tools, and run Uninstall. Repeat for every Brother model in the model selector.
  4. Reboot.
  5. For a clean wipe before a fresh install, use Driver Store Explorer (RAPR) to remove the Brother driver package from the Windows driver store.

On macOS:

  1. Open System Settings > Printers & Scanners and remove the MFC-L8900CDW.
  2. Remove the Brother driver files manually from /Library/Printers/Brother/.
  3. Restart the Mac.

On Linux:

sudo dpkg -r mfcl8900cdwcupswrapper mfcl8900cdwlpr brscan4 brmfcl8900cdwpcfax    # Debian/Ubuntu
sudo rpm -e mfcl8900cdwcupswrapper mfcl8900cdwlpr brscan4 brmfcl8900cdwpcfax     # Fedora/RHEL

Brother MFC-L8900CDW at a glance

Spec Value
Print technology Color laser
Functions Print, scan, copy, fax
Print speed Up to 33 pages per minute (black and color)
Print resolution 2400 x 600 dpi class
Duplex printing Automatic two-sided (on by default)
Scanner type Legal-size flatbed + 70-sheet single-pass duplex ADF
Scanning speed Up to 58 ipm (duplex, color)
Copy resolution Up to 600 x 600 dpi
Fax 33.6 Kbps modem, duplex faxing, 500-page memory, PC fax send/receive
First page out time 15 seconds (black and color, from Ready mode)
Display Color touchscreen
Paper capacity 250-sheet tray + 50-sheet multipurpose + 150-sheet output
Connections Hi-Speed USB 2.0, Wi-Fi 802.11 b/g/n (2.4 GHz only), Gigabit Ethernet, Wi-Fi Direct, NFC
Mobile printing AirPrint, Mopria, Brother iPrint&Scan, Wi-Fi Direct, NFC tap-to-print
PostScript emulation BR-Script 3 (PostScript 3 compatible) — built into printer firmware
Windows support 11 (64-bit), 10, 8.1, 8, 7 (32-bit and 64-bit)
macOS support Yosemite 10.10 through Sonoma 14 (Sequoia 15 and Tahoe 26 via AirPrint only)
Linux support Yes — LPR + CUPSwrapper + Scanner + PC FAX packages (deb and rpm)
Toner cartridges TN431 (standard), TN433 (high-yield) — Black, Cyan, Magenta, Yellow
Drum unit DR431CL (color drum, up to 30,000 pages)

Frequently Asked Questions

How do I set up the scanner on the Brother MFC-L8900CDW?

On Windows, the Full Driver and Software Package installs the scanner driver along with the print driver — one install covers both. After it finishes, open the Brother iPrint&Scan app or Windows Fax and Scan, pick the MFC-L8900CDW from the device list, and run a test scan from the flatbed or the 70-sheet ADF. For duplex scanning through the ADF, set the scan mode to “2-sided” in the scan dialog. On macOS 11 through 14, install the matching ICA Scanner Driver — the scanner shows up in Image Capture and Preview. On macOS 10.14 and earlier, the Full Software Package handles the scanner install.

Does the MFC-L8900CDW driver work on Mac?

Yes, with a caveat on modern macOS. Brother publishes macOS drivers for Yosemite 10.10 through Sonoma 14. For macOS Big Sur 11 through Sonoma 14, the download is an ICA Scanner Driver only — printing on modern macOS uses AirPrint, which works out of the box without any driver. For macOS Catalina 10.15 you get a separate Printer Driver and ICA Scanner Driver, and for macOS 10.14 and earlier you get a Full Software Package. For macOS Sequoia 15 and Tahoe 26, Brother hasn’t published updated drivers — AirPrint still handles printing, but scanning on those versions may need the Sonoma 14 driver, with no guarantees.

Does the MFC-L8900CDW driver work on Windows 11?

Yes. Brother publishes a Full Driver and Software Package for Windows 11 (64-bit) — scroll up to the Driver files section. The same installer covers Windows 10, 8.1, 8, and 7 as well. The package installs the print driver, scanner driver, PC fax driver, Brother iPrint&Scan, and the Status Monitor in one run.

Does the MFC-L8900CDW scan both sides of a page in one pass?

Yes. The 70-sheet ADF supports single-pass duplex scanning — both sides of the page are captured in a single pass through the feeder, at up to 58 images per minute. Set the scan job to duplex from the touchscreen or from the scanner software on your computer.

Does the MFC-L8900CDW support PostScript?

Yes. BR-Script 3 (Brother’s PostScript 3 emulation) is built into the printer firmware — no separate driver download needed. Workflows that output PostScript directly (prepress, some graphic design apps, mixed Mac-Windows fleets) can send raw PostScript to the printer. Pick the BR-Script option in your print dialog when the application offers it, or configure your print queue to use PostScript.

How do I install the MFC-L8900CDW on Linux?

The MFC-L8900CDW uses Brother’s older Linux driver layout — two separate printer packages that must be installed in order. On Debian/Ubuntu: run sudo dpkg -i mfcl8900cdwlpr-*.deb first, then sudo dpkg -i mfcl8900cdwcupswrapper-*.deb. On Fedora/RHEL: sudo rpm -ihv --nodeps on each in the same order. For scanning, install the brscan4 scanner driver matching your architecture. For PC fax, install the PC FAX Driver. All packages are in the Driver files section above.