Canon PIXMA MX922 Driver Download

The Canon PIXMA MX922 is a Wireless Office All-In-One inkjet that landed in 2013 and still shows up on home-office desks today. It prints at 15 ipm in black and 10 ipm in color at up to 9600 x 2400 dpi, scans through a 35-sheet ADF or on the flatbed, and runs on a 5-ink system — one pigment-based black for crisp text plus four dye inks for photo output. Driver support covers Windows 11 down to XP, macOS Ventura 13 down to Snow Leopard 10.6, and Linux through Canon-published packages.

This page has every current driver file for the PIXMA MX922, plus the install flow I use for first-time setup, notes on the modern macOS situation where Canon stopped publishing updated drivers after Ventura 13, and the Microsoft driver framework changes affecting all pre-2015 printers like this one.

🖥️Supported Operating Systems

Windows

Windows11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit), XP (32-bit)

macOS

macOSVentura 13, Monterey 12, Big Sur 11, Catalina 10.15, Mojave 10.14, High Sierra 10.13, Sierra 10.12, El Capitan 10.11, Yosemite 10.10, Mavericks 10.9, Mountain Lion 10.8, Lion 10.7, Snow Leopard 10.6

Linux

Linux32-bit and 64-bit (deb, rpm, and source packages)

Which driver do I need for the PIXMA MX922?

On Windows, the MP Drivers package (38.54 MB) is the standard download — it covers Windows 11 (64-bit) down to Windows XP (32-bit) and installs the print driver, scan driver, PC fax driver, and Canon IJ utilities in one go. For a Windows machine that needs XPS output (prepress workflows, some document imaging apps), add the XPS Printer Driver (15.46 MB) separately. The two Printers and Multifunction Printers security patches close known vulnerabilities on Windows 11/10/8.1 and Windows 7 respectively — apply the one that matches your Windows version. Mini Master Setup (26.17 MB) is a slim installer for legacy Windows (8.1 down to XP) that handles first-time printer discovery.

On macOS, the right download depends on your macOS version. For macOS Big Sur 11 through Ventura 13, install the CUPS Printer Driver (16.85 MB) plus the Scanner Driver for macOS 13 and 12 (27.29 MB) and the ICA Driver (3.62 MB). For OS X Lion 10.7 through macOS Monterey 12, there are matching CUPS and ICA packages, plus a Scanner Driver per macOS era. For Mac OS X 10.6 Snow Leopard, separate CUPS, ICA, and Scanner Driver packages apply, plus a Mini Master Setup for Mac OS X 10.6 through 10.8 that handles first-time setup.

On Linux, Canon publishes the IJ Printer Driver and ScanGear MP each in deb, rpm, and source forms — pick the format that matches your distribution, or build from source if you’re on an unusual architecture.

Canon PIXMA MX922 Drivers for Windows

XPS Printer Driver

Windows 11 (64-bit), Windows 10, 8.1, 8, 7, Vista (32-bit and 64-bit)

16.21 MBDownload

Security Patch (Windows 11/10/8.1)

Windows 11 (64-bit), Windows 10 and 8.1 (32-bit and 64-bit)

43.42 KBDownload

Security Patch (Windows 7)

Windows 7 (32-bit and 64-bit)

43.42 KBDownload

Mini Master Setup

Windows 8.1, 8, 7, Vista, XP (32-bit and 64-bit)

27.44 MBDownload

Canon PIXMA MX922 Drivers for macOS

Scanner Driver (macOS 13 and 12)

macOS Ventura 13 and Monterey 12

28.61 MBDownload

ICA Driver (macOS 11 to 13)

macOS Ventura 13, Monterey 12, Big Sur 11

3.80 MBDownload

CUPS Printer Driver (OS X 10.7 to macOS 12)

OS X Lion 10.7 through macOS Monterey 12

16.30 MBDownload

ICA Driver (OS X 10.7 to macOS 12)

OS X Lion 10.7 through macOS Monterey 12

2.55 MBDownload

Scanner Driver (macOS 11 and 10.15)

macOS Big Sur 11 and Catalina 10.15

23.82 MBDownload

ICA Driver (macOS 10.15)

macOS Catalina 10.15

2.55 MBDownload

Scanner Driver (macOS 10.14 and 10.13)

macOS Mojave 10.14 and High Sierra 10.13

27.70 MBDownload

Scanner Driver (Mac OS X 10.6 to macOS 10.12)

Mac OS X Snow Leopard 10.6 through macOS Sierra 10.12

28.05 MBDownload

Mini Master Setup (Mac)

Mac OS X Snow Leopard 10.6 through OS X Mountain Lion 10.8

61.42 MBDownload

CUPS Printer Driver (macOS 10.6)

Mac OS X Snow Leopard 10.6

18.15 MBDownload

ICA Driver (macOS 10.6)

Mac OS X Snow Leopard 10.6

3.71 MBDownload

Canon PIXMA MX922 Drivers for Linux

IJ Printer Driver (RPM package archive)

Fedora, RHEL, CentOS, openSUSE — tar.gz archive containing .rpm

3.43 MBDownload

IJ Printer Driver (source)

All Linux distributions — build from source tar.gz

6.83 MBDownload

ScanGear MP (Debian package archive)

Debian, Ubuntu, Mint — tar.gz archive containing .deb

1.38 MBDownload

ScanGear MP (RPM package archive)

Fedora, RHEL, CentOS, openSUSE — tar.gz archive containing .rpm

1.42 MBDownload

ScanGear MP (source)

All Linux distributions — build from source tar.gz

3.65 MBDownload

Before you install

A few checks before running the installer save time later.

  • Sign in to Windows or macOS with an account that has administrator rights.
  • Plug the PIXMA MX922’s power cable into a wall outlet and connect the phone line to the LINE jack on the back if you plan to use fax.
  • Decide whether you’re setting up over USB, Wi-Fi, or Ethernet — the installer prompts for connection type early.
  • Install all five ink tanks before powering on — the MX922 uses PGI-250 PGBK plus CLI-251 BK, C, M, and Y. The printer runs an initial charging cycle the first time.
  • Remove the orange shipping tape and the protective material from the paper cassettes.
  • Load plain paper in the lower cassette (holds 250 sheets) and photo paper in the upper cassette (holds 20 sheets of 4″ x 6″).

Install the PIXMA MX922 driver step by step on Windows

Click the download link next to the MP Drivers in the Driver files section above and save the installer to your Downloads folder.

  1. Right-click the downloaded file and pick Run as administrator.
  2. Accept the license agreement when the first screen asks.
  3. Pick your connection method when the installer asks: USB, Wireless LAN, or Wired LAN.
  4. If you picked USB, connect the printer to your computer with a USB cable and power the printer on when the installer tells you to.
  5. If you picked Wireless, the installer walks you through picking your Wi-Fi network on the printer’s 3.0-inch LCD. Press Setup, pick Device settings > LAN settings > Wireless LAN setup, pick your SSID, and enter the Wi-Fi password using the numeric keypad. The MX922’s Wi-Fi is 2.4 GHz only, so make sure your router has a 2.4 GHz SSID the printer can see.
  6. If you picked Wired LAN, connect an Ethernet cable between the printer and your router or switch.
  7. Let the installer finish. The MP Drivers package registers the print driver, scan driver, PC fax driver, and Canon IJ utilities.
  8. When install completes, print a test page from the driver properties dialog and run a test scan to confirm both paths work.

If you’re using a workflow that outputs XPS (some document imaging apps, prepress), install the XPS Printer Driver (15.46 MB) from the Driver files section after the MP Drivers install.

Install the PIXMA MX922 driver on macOS

The right macOS install depends on your macOS version.

On macOS Ventura 13, Monterey 12, or Big Sur 11: install three packages in order — the CUPS Printer Driver for macOS 11 to 13 (16.85 MB) first for printing, then the Scanner Driver for macOS 13 and 12 (or 11 and 10.15, matching your version) for the full Canon scanner stack, then the ICA Driver (3.62 MB) for Image Capture and Preview scanning.

On macOS Monterey 12 down to OS X Lion 10.7: install the CUPS Printer Driver for 10.7 to 12 (15.54 MB) plus the ICA Driver for 10.7 to 12 (2.43 MB), with the per-version Scanner Driver for your macOS.

On Mac OS X Snow Leopard 10.6: install Mini Master Setup (58.57 MB) for first-time setup, then the dedicated CUPS Printer Driver (17.31 MB) and ICA Driver (3.54 MB) for macOS 10.6.

Run each DMG, accept the license, and let the installer register the driver with macOS. Run a test print and test scan when done.

Install the PIXMA MX922 driver on Linux

Canon publishes the Linux driver in three formats — deb for Debian/Ubuntu/Mint, rpm for Fedora/RHEL/openSUSE, and source for building from scratch.

For printing on Debian/Ubuntu, with the .deb in the current folder:

sudo dpkg -i cnijfilter2_*.deb

On Fedora/RHEL:

sudo rpm -ihv --nodeps cnijfilter2-*.rpm

Add the printer through your desktop’s print settings — Settings > Printers > Add Printer, pick the MX922 from the list.

For scanning, install the ScanGear MP package matching your distribution:

sudo dpkg -i scangearmp2_*.deb
# or
sudo rpm -ihv --nodeps scangearmp2-*.rpm

Test the scanner with scanimage -L — the MX922 should appear in the SANE device list. Open Simple Scan or your preferred SANE app to run a test scan.

For building from source, extract the tarball, cd into the extracted folder, and run the included install script — the exact command is in the README inside each source package.

What to check after install

  • Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The Canon PIXMA MX922 should appear in both printer and scanner lists.
  • Print a color test page from the driver properties dialog. The MX922 runs an initial ink-charging cycle on first use, which takes several minutes — don’t power it off during this.
  • Run a test scan from Windows Fax and Scan or macOS Preview — try both the flatbed and the 35-sheet ADF.
  • Check the 3.0-inch LCD — it should show the Home screen with Copy, Fax, Scan, Photo, and Menu options.
  • If you set up fax, send a test fax from the touch buttons around the LCD.

Print and scan from your phone or tablet

The PIXMA MX922 supports AirPrint for iPhone and iPad printing on the same Wi-Fi network. Canon’s PRINT app (iOS and Android) handles mobile printing, scanning, and cloud integration — install it from the App Store or Google Play, and pair it with the MX922 on your Wi-Fi.

For Android, Canon PRINT is the primary path. Mopria Print Service doesn’t list the MX922 among its supported printers, so the Canon app is the safer choice for Android.

If install fails

The checks below cover the common failure modes, in the order I’d try them.

  • MP Drivers installer fails on Windows 11. Delete the downloaded installer and re-download it. If re-download doesn’t fix it, right-click the installer, open Properties, go to the Compatibility tab, check “Run this program in compatibility mode for”, and try Windows 8 first, then Windows 7.
  • Wi-Fi install can’t find the printer. The MX922 is 2.4 GHz only — if your PC sits on 5 GHz, Wi-Fi discovery fails because the printer can’t see the PC’s band. Switch the PC to the 2.4 GHz SSID temporarily, or use Ethernet for the install.
  • Printer not found over USB. Switch to a different USB port — prefer a direct port on the computer over a hub. Swap the cable if you have a spare.
  • Scanner missing on macOS Big Sur or later. Modern macOS splits the install — you need the CUPS Printer Driver for printing, plus a separate Scanner Driver, plus the ICA Driver. If scanning doesn’t work, verify all three are installed.
  • Windows 7 / 8 / Vista legacy install. If the standard MP Drivers package doesn’t launch on legacy Windows, use the Mini Master Setup (26.17 MB) instead — it’s Canon’s slim installer for Windows 8.1 down to XP.
  • Linux print spool stuck. If print jobs sit in the queue without printing, the cnijfilter2 package may be missing a dependency. Run sudo apt-get install -f on Debian/Ubuntu to resolve, or sudo yum install the missing dependency on Fedora/RHEL.

Known issues with the PIXMA MX922

macOS Sonoma 14, Sequoia 15, and Tahoe 26 — no updated driver. Canon’s macOS driver support for the MX922 stops at macOS Ventura 13. On newer macOS, AirPrint handles basic printing without any driver install — add the printer in System Settings > Printers & Scanners > Add Printer and pick the MX922 from the network list. For scanning on newer macOS, the Ventura 13 Scanner Driver may install but behavior isn’t guaranteed; Image Capture or Preview’s basic scanner support covers simple scans without the Canon driver.

Wi-Fi is 2.4 GHz only. The MX922’s 802.11 b/g/n radio doesn’t support 5 GHz. Modern routers that default to band steering can land the PC and printer on different bands, blocking discovery. Pick a Wi-Fi network that exposes the 2.4 GHz SSID separately, or disable band steering for the setup step.

Microsoft legacy printer framework phase-out. Microsoft is phasing out the printer driver frameworks that pre-2015 printers like the MX922 rely on, so previously working drivers may stop functioning after a Windows 11 feature update. If Canon’s driver fails after an update, add the printer using Windows’ built-in generic IPP class driver instead: Settings > Printers & scanners > Add device > “The printer that I want isn’t listed” > Add a printer using a TCP/IP address, then pick IPP as the protocol. Basic printing works, though you lose Canon’s utilities.

Initial ink charging consumes a significant portion of the starter tanks. First-time setup runs an ink-priming cycle that uses meaningful amounts from each of the five tanks. This is normal for inkjet all-in-ones, but it’s worth having a set of replacement cartridges ready if you’re running the printer for a large initial batch.

XP 32-bit only, no XP 64-bit. The XP driver is 32-bit only — if you’re running XP Professional x64, the MX922 driver doesn’t cover you, and the printer falls back to generic class driver support.

How to fully uninstall the PIXMA MX922 driver

On Windows:

  1. Open Settings > Printers & scanners and remove the Canon PIXMA MX922 entry.
  2. Open Settings > Apps > Installed apps and uninstall Canon MP Drivers, Canon IJ Scan Utility, and any other Canon component tied to the MX922.
  3. Reboot.
  4. For a clean wipe before a fresh install, use Driver Store Explorer (RAPR) to remove the Canon driver package from the Windows driver store.

On macOS:

  1. Open System Settings > Printers & Scanners and remove the MX922.
  2. Remove the Canon driver files manually from /Library/Printers/Canon/ and /Library/Image Capture/Devices/.
  3. Restart the Mac.

On Linux:

sudo dpkg -r cnijfilter2 scangearmp2        # Debian/Ubuntu
sudo rpm -e cnijfilter2 scangearmp2         # Fedora/RHEL

Canon PIXMA MX922 at a glance

Spec Value
Print technology Color inkjet
Functions Print, scan, copy, fax
Print speed ESAT 15.0 ipm (black), 10.0 ipm (color)
Print resolution Up to 9600 x 2400 dpi (color)
Duplex printing Automatic two-sided
Scanner type Flatbed (letter) + 35-sheet ADF
Optical scan resolution 2400 x 4800 dpi
Fax Super G3 at 33.6 Kbps, 250-page memory, 100 speed-dial locations
Display 3.0-inch color LCD (Intelligent Touch System buttons)
Paper capacity 250-sheet lower cassette + 20-sheet upper cassette (photo paper)
Connections Hi-Speed USB 2.0, Wi-Fi 802.11 b/g/n (2.4 GHz only), Ethernet
Mobile printing AirPrint, Canon PRINT (iOS and Android)
Windows support 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit), XP (32-bit)
macOS support Ventura 13 down to Snow Leopard 10.6 (Sonoma 14 and later via AirPrint)
Linux support Yes — IJ Printer Driver + ScanGear MP (deb, rpm, source)
Ink cartridges PGI-250 PGBK (pigment), CLI-251 BK/C/M/Y (dye) — standard, XL, and XXL yields

Frequently Asked Questions

How do I connect my Canon MX922 to my computer?

Three options. USB is the fastest to get working — plug a USB cable between the MX922 and your computer during the MP Drivers install and the installer handles the rest. For wireless, the MX922’s 2.4 GHz Wi-Fi radio pairs through the printer’s own LCD menu: press Setup > Device settings > LAN settings > Wireless LAN setup, pick your SSID, and enter the Wi-Fi password with the numeric keypad. For wired, plug an Ethernet cable into the back of the MX922 and connect to your router or switch — the installer finds it by IP address.

How do I download Canon PIXMA drivers?

For the PIXMA MX922, scroll up to the Driver files section — the MP Drivers package (38.54 MB) is Canon’s recommended download for Windows, the CUPS Printer Driver for macOS 11-13 (16.85 MB) is the current macOS pick, and the IJ Printer Driver in deb/rpm/source covers Linux. All downloads on this page are the current Canon-released files, with no signup walls. For other Canon PIXMA models, each printer has its own page with its own set of files.

How old is the Canon MX922?

The PIXMA MX922 launched in 2013, which makes it a pre-2015 printer. That matters for driver support — Microsoft is phasing out the legacy printer driver frameworks that pre-2015 models rely on, and Canon’s macOS driver support stops at macOS Ventura 13. On newer Windows 11 feature updates and newer macOS versions, AirPrint and generic IPP class drivers handle basic printing, but Canon’s own utilities may not work. Despite its age, the MX922’s hardware still runs fine — it’s the OS-level support that’s thinning.

Is the Canon PIXMA MX922 compatible with Windows 11?

Yes. Canon publishes the MP Drivers package specifically for Windows 11 (64-bit) — grab it from the Driver files section above. The same installer covers Windows 10, 8.1, 8, 7, Vista, and XP. Note that Microsoft is phasing out the legacy printer frameworks this pre-2015 printer relies on, so if Canon’s driver fails after a Windows 11 feature update, add the printer using Windows’ built-in generic IPP class driver as a fallback for basic printing.

What ink does the Canon PIXMA MX922 use?

The MX922 uses a 5-ink system — PGI-250 PGBK (pigment black for crisp text on plain paper) plus CLI-251 BK, C, M, and Y (dye-based cartridges for photo output). Each color is a separate cartridge, so you only replace what runs out. Canon offers three yield options: standard (PGI-250 / CLI-251), XL (PGI-250XL / CLI-251XL), and XXL for pigment black only (PGI-250 PGBK XXL / PGI-255 PGBK XXL). XL and XXL yields cost less per page for heavy workloads.