Canon PIXMA MX490 Driver Download

The Canon PIXMA MX490 is a compact inkjet multifunction — print, scan, copy, and fax in one unit, built for home office workloads. It prints at up to 4800 x 1200 dpi, handles a 20-sheet auto document feeder for multi-page scan and copy jobs, and sends Super G3 fax over a built-in modem. Driver support covers Windows 11 all the way back to Windows XP (32-bit), macOS Lion 10.7 through Sonoma 14, and Linux via IJ Printer Driver and ScanGear MP packages.

This page collects every current driver file for the PIXMA MX490 — Canon’s three Windows driver choices (MP Drivers, Full Driver and Software Package, and XPS Printer Driver), all macOS components, Linux packages, and the Microsoft framework notes that come with a model this age. Install walkthroughs for each operating system are below.

🖥️Supported Operating Systems

Windows

Windows11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit), XP (32-bit)

macOS

macOSSonoma 14, Ventura 13, Monterey 12, Big Sur 11, Catalina 10.15, Mojave 10.14, High Sierra 10.13, Sierra 10.12, El Capitan 10.11, Yosemite 10.10, Mavericks 10.9, Mountain Lion 10.8, Lion 10.7

Linux

LinuxUbuntu, Debian, Mint and other deb-based distributions; Fedora, RHEL, openSUSE and other rpm-based distributions (32-bit and 64-bit); source build available

Which Canon MX490 driver should I download?

Canon publishes three Windows driver options for this MFP, and the right pick depends on your Windows version and what you plan to do with the printer.

MP Drivers (33.87 MB) — Canon’s unified Windows driver that bundles the print driver, scanner driver, fax driver, and ScanGear utility in one installer. Covers every supported Windows from Windows 11 all the way down to Windows XP. This is the recommended download for most users.

Full Driver and Software Package (51.76 MB) — a bigger installer with MP Drivers plus the additional Canon software suite (My Image Garden, Quick Menu, Easy-WebPrint EX, and related utilities). Covers Windows 10 through XP but not Windows 11 — on Windows 11, use MP Drivers instead.

XPS Printer Driver (13.79 MB) — a specialized print driver that produces higher-fidelity output for applications that work with XPS documents. Covers Windows 11 through Windows Vista (not XP). Install it in addition to MP Drivers only if you work with XPS-format files; most users don’t need it.

On macOS, Canon splits components per macOS era. For macOS Big Sur 11 through Sonoma 14 — the CUPS Printer Driver (16.5 MB) for printing and ICA Driver (3.11 MB) for scanning. For Mac OS X Lion 10.7 through macOS Monterey 12 — the older CUPS Printer Driver (15.11 MB) plus the ICA Driver for 10.7-11 (1.79 MB). For a one-shot installer covering Lion 10.7 through High Sierra 10.13, the Full Driver and Software Package for Mac (16.49 MB) bundles everything.

On Linux, Canon publishes two driver families: the IJ Printer Driver for printing and ScanGear MP for scanning. Both come as .tar.gz archives containing the actual .deb or .rpm packages — you extract the archive first, then install the inner package. Source builds are also available if you need to compile for an unsupported architecture.

Canon PIXMA MX490 Drivers for Windows

Full Driver and Software Package for Windows

Windows 10, 8.1, 8, 7, Vista (32-bit and 64-bit), XP (32-bit) — includes extra Canon software suite

51.76 MBDownload

XPS Printer Driver for Windows

Windows 11 (64-bit), Windows 10, 8.1, 8, 7, Vista (32-bit and 64-bit) — for XPS document workflow

13.79 MBDownload

Printers security patch

Windows 11 (64-bit), Windows 10, 8.1 (32-bit and 64-bit) — security update, install after MP Drivers

43.42 kBDownload

Printers security patch for Windows 7

Windows 7 (32-bit and 64-bit) — security update, install after MP Drivers

43.42 kBDownload

Canon PIXMA MX490 Drivers for macOS

ICA Driver for macOS 11 to 14

macOS Big Sur 11 through Sonoma 14 — scanning component

3.11 MBDownload

Full Driver and Software Package

OS X Lion 10.7 through macOS High Sierra 10.13 — print, scan, software suite bundle

16.49 MBDownload

CUPS Printer Driver for Mac OS X 10.7 to macOS 12

OS X Lion 10.7 through macOS Monterey 12 — printing component

15.11 MBDownload

ICA Driver for Mac OS X 10.7 to macOS 11

OS X Lion 10.7 through macOS Big Sur 11 — scanning component (legacy)

1.79 MBDownload

Canon PIXMA MX490 Drivers for Linux

Canon packages Linux drivers as .tar.gz archives containing the actual .deb or .rpm package — you need to extract the archive first with tar -xzf, then install the inner package with dpkg or rpm. Source builds are also available for distributions without matching binary packages.

IJ Printer Driver for Linux (rpm package)

Fedora, RHEL, openSUSE and other rpm-based distributions (32-bit and 64-bit) — tar.gz archive containing .rpm

275.91 kBDownload

IJ Printer Driver for Linux (source file)

All Linux distributions — source tarball, compile yourself

404 kBDownload

ScanGear MP for Linux (deb package)

Ubuntu, Debian, Mint and other deb-based distributions (32-bit and 64-bit) — scan driver, tar.gz archive containing .deb

241.83 kBDownload

ScanGear MP for Linux (rpm package)

Fedora, RHEL, openSUSE and other rpm-based distributions (32-bit and 64-bit) — scan driver, tar.gz archive containing .rpm

218.01 kBDownload

ScanGear MP for Linux (source file)

All Linux distributions — scan driver source tarball, compile yourself

208.81 kBDownload

Prep work before installation

  • Sign in to Windows, macOS, or Linux with an account that has administrator or sudo privileges.
  • Plug the PIXMA MX490’s power cable into a wall outlet but leave the printer off. The installer tells you when to power it on.
  • Decide which connection path you’re using: USB or Wi-Fi. The MX490 has no Ethernet port, so wired network isn’t an option.
  • Unbox the printer and remove all orange protective tape and the paper from the scanner glass area before powering on.
  • Install both ink cartridges (PG-245 pigment black and CL-246 tri-color) before running the installer — the printer initializes the ink system during first power-on and won’t complete setup without them.
  • Load plain paper in the 100-sheet rear tray.
  • For wireless setup, confirm your router exposes a 2.4 GHz SSID. The MX490’s radio is 802.11 b/g/n (2.4 GHz only) and won’t see a 5 GHz-only network.
  • If you plan to send and receive fax, connect the phone line to the LINE port on the back of the printer before install.
  • On Windows XP or Vista, note that Microsoft’s .NET Framework and other legacy runtimes may no longer receive updates — install Canon’s dedicated security patch (listed in the Windows driver section) after MP Drivers to close known vulnerabilities on those platforms.

Windows setup for the PIXMA MX490

  1. Right-click the MP Drivers download and pick Run as administrator.
  2. Accept the license agreement when the installer prompts.
  3. Pick your connection method: USB Connection or Wireless LAN Connection.
  4. For USB — connect the cable between the printer and the PC when the installer tells you to.
  5. For Wireless — pair the printer to Wi-Fi first through the printer’s menu (Menu > LAN settings > Wireless LAN setup), then run the installer and pick Wireless LAN Connection. WPS also works if your router has a push button.
  6. Let the installer complete, print a test page, and run a scan from IJ Scan Utility (included with MP Drivers) to confirm the scanner is working.
  7. Install the appropriate security patch for your Windows version — one patch covers Windows 11, 10, and 8.1; a separate patch covers Windows 7.
  8. If you work with XPS-format documents, install the XPS Printer Driver on top for higher-fidelity output.

macOS setup for the PIXMA MX490

Canon split the macOS install flow by macOS version — install two separate components (CUPS Printer Driver for print, ICA Driver for scan) on recent macOS, or a single Full Driver and Software Package on legacy macOS.

On macOS Big Sur 11 through Sonoma 14: mount the CUPS Printer Driver DMG (16.5 MB) and run the installer for printing, then mount the ICA Driver DMG (3.11 MB) and run that installer for scanning.

On Mac OS X Lion 10.7 through macOS Monterey 12: use the older CUPS Printer Driver (15.11 MB) plus the ICA Driver for 10.7-11 (1.79 MB). Note that macOS Monterey 12 can use either the newer CUPS driver (for 11-14) or the older (for 10.7-12) — the newer one is better maintained.

On Mac OS X Lion 10.7 through macOS High Sierra 10.13: the Full Driver and Software Package (16.49 MB) is a one-shot installer that bundles print, scan, and Canon’s utility suite in one DMG. Easier than installing CUPS and ICA components separately.

Add the printer in System Settings > Printers & Scanners after install — the MX490 appears by model name on the Wi-Fi network.

Linux setup for the PIXMA MX490

Canon’s Linux packages aren’t direct .deb or .rpm files — they’re .tar.gz archives containing the real package. Extract first, then install.

On Ubuntu, Debian, Mint, and other deb-based distributions:

  1. Extract the IJ Printer Driver archive: tar -xzf Canon-PIXMA-MX490-IJ-Printer-Driver-Linux-debian-Packagearchive.tar.gz
  2. Change to the extracted folder and run the installer script Canon includes, or install the .deb files directly with sudo dpkg -i --force-all *.deb
  3. For scanning, repeat for the ScanGear MP archive: tar -xzf Canon-PIXMA-MX490-ScanGear-MP-Linux-debian-Packagearchive.tar.gz and install.
  4. Open the CUPS web interface at http://localhost:631 and confirm the PIXMA MX490 appears in the printer list.
  5. Run scanimage -L to confirm SANE detects the scanner.

On Fedora, RHEL, openSUSE, and other rpm-based distributions:

  1. Extract: tar -xzf Canon-PIXMA-MX490-IJ-Printer-Driver-Linux-rpm-Packagearchive.tar.gz
  2. Install: sudo rpm -ihv --nodeps *.rpm (or run Canon’s included install script).
  3. Repeat for ScanGear MP: extract the rpm archive, then install.
  4. Verify in CUPS at http://localhost:631.

If your distribution doesn’t match Canon’s prebuilt packages (unusual CPU architecture, alternative distro), use the source tarball — extract, read the README, run ./configure && make && sudo make install.

After the install — what to check

  • Open Settings > Printers & scanners (Windows), System Settings > Printers & Scanners (macOS), or your distribution’s print settings (Linux). The Canon PIXMA MX490 should show in the printer list.
  • Print a test page. First page out for text is around 7-10 seconds from standby.
  • Check the Full Dot Matrix LCD on the printer — it should display the Ready status and, on a wireless connection, a Wi-Fi signal indicator.
  • Load a stack of originals in the 20-sheet ADF and run a scan from IJ Scan Utility (Windows), Image Capture (macOS), or scanimage (Linux). The MX490’s ADF scans one-sided only — flip the stack if you need the backs.
  • If fax is wired up, send a test fax from the printer’s keypad to confirm the phone line connection.
  • Confirm ink levels through Canon IJ Status Monitor (Windows) or Canon IJ Printer Utility (macOS) — low ink can cause print quality issues from day one if the starter cartridges were partially used.

Printing and scanning from mobile

The PIXMA MX490 supports AirPrint on iPhone and iPad for direct printing and scanning from any iOS app with a Share sheet. Make sure the printer and phone are on the same Wi-Fi network.

For Android, install Canon PRINT Inkjet/SELPHY from Google Play — Canon’s app for both print and scan. Pair the printer on your Wi-Fi network through the app’s onboarding flow. Mopria Print Service is another Android option for devices that have it built in.

The printer’s wireless setup also supports direct printing from a mobile device without a router (Access Point Mode) — the MX490 creates its own temporary Wi-Fi hotspot that your phone joins directly.

When the install doesn’t work

  • MP Drivers installer stalls on Windows. Delete the download and re-download. If that doesn’t help, run the installer in Windows 7/8 compatibility mode — right-click the .exe, pick Properties, open the Compatibility tab, and check “Run this program in compatibility mode for Windows 7.” The MX490’s installer was built for older Windows and can occasionally stumble on modern Windows 11 builds.
  • Wi-Fi install can’t find the printer. Pair the printer to Wi-Fi first through its menu (Menu > LAN settings > Wireless LAN setup), then run the driver installer — this time it finds the printer by IP on the local subnet.
  • Printer not detected over USB. Switch to a direct USB port on the PC rather than a hub. Swap the cable if you have a spare — the MX490 uses a standard USB Type-B connector on the printer side.
  • Band steering on a dual-band router. The MX490 runs on 2.4 GHz only. If your router runs band steering, the PC and printer can land on different bands. Connect the PC to the 2.4 GHz SSID manually during install.
  • No Canon driver on macOS Sequoia 15 or Tahoe 26. Canon driver support for this model stops at macOS Sonoma 14. On newer macOS, AirPrint handles basic printing — add the printer in System Settings > Printers & Scanners. For scanning on Sequoia 15 and Tahoe 26, Image Capture with the ICA Driver for macOS 11-14 often continues to work despite not being officially supported.
  • Linux install script fails to find the extracted packages. Canon’s Linux install scripts expect to be run from inside the extracted folder — cd into it before running ./install.sh, not from the parent directory.
  • Legacy .NET Framework missing on Windows Vista or XP. Canon’s MP Drivers on legacy Windows needs .NET Framework 2.0 or 3.5 — if the installer complains about missing framework components, install .NET from Microsoft’s legacy download page first.

When the scanner or fax won’t work

  • Scanner not detected in IJ Scan Utility. On Windows, check that the ScanGear component installed — open Settings > Apps > Installed apps and look for “Canon ScanGear MP.” If missing, re-run MP Drivers with Scanner Driver selected in the component list.
  • ADF jams or pulls multiple sheets. The 20-sheet ADF has a paper separation roller that wears over time. Clean it with a lint-free cloth and fan the stack of originals before loading. For glossy, thin, or wrinkled paper, scan from the platen glass instead.
  • Linux scanner not found by SANE. After installing ScanGear MP, run sudo sane-find-scanner and scanimage -L. If the scanner isn’t listed, add your user to the scanner group: sudo usermod -aG scanner $USER, log out and back in.
  • Fax rings but doesn’t answer. Check the Receive Mode on the printer’s menu — FAX menu > Receive mode settings. The default is TEL priority mode (picks up on an attached phone first); switch to FAX only mode if the printer should answer all incoming calls.
  • Fax quality is poor on color documents. Super G3 transmits color fax only to fax machines that also support color — most don’t. If the receiving machine is black-and-white only, Canon will convert color to grayscale, and halftones can come through poorly. Scan the original first and attach it to email for a better result.

Limitations and caveats

macOS driver support stops at Sonoma 14. Canon hasn’t published a driver for this MFP on macOS Sequoia 15 or Tahoe 26. AirPrint handles basic printing on newer macOS — add the printer in System Settings > Printers & Scanners. Scanner support on Sequoia 15 and Tahoe 26 is the real gap; the ICA Driver for macOS 11-14 often continues to work despite not being officially supported.

No automatic two-sided printing. The PIXMA MX490 prints single-sided only. For a two-sided document, feed pages manually: print odd pages first, flip the stack, then print even pages. This is a budget-class inkjet limitation — PIXMA MX920-series and higher had automatic duplex at a similar time.

Wi-Fi is 2.4 GHz only. The MX490’s 802.11 b/g/n radio doesn’t support 5 GHz. On networks with aggressive band steering, this can block discovery during install. There’s no Ethernet port on this model — Wi-Fi or USB are the only options.

Google Cloud Print discontinued December 2020. The MX490 originally supported Google Cloud Print as one of its mobile printing paths. Google retired Cloud Print at the end of 2020, so that path is gone. Canon PRINT Inkjet/SELPHY, Mopria Print Service, and AirPrint are the active alternatives.

Microsoft legacy framework phase-out note. The MX490 drivers predate Microsoft’s phase-out of .NET Framework 2.0, 3.5, and related legacy runtimes on Windows 11 and 10. On modern Windows, the MP Drivers installer still works, but some utilities from the Full Driver and Software Package (My Image Garden, Easy-WebPrint EX) may show missing-component warnings. Install the dedicated Canon security patch to close known vulnerabilities, and skip the legacy utilities if they don’t apply to your workflow.

Starter ink cartridges have a lower yield. Canon ships the MX490 with starter PG-245 and CL-246 cartridges that print fewer pages than the full retail cartridges. For a home office workload, buy the PG-245XL black and CL-246XL color high-yield cartridges early — they cost more per cartridge but less per page.

No Ethernet port. The MX490 connects over Wi-Fi or USB only. If your network setup needs a wired printer, either use USB from a nearby PC or step up to a model with an Ethernet jack.

Full driver removal

On Windows:

  1. Open Settings > Printers & scanners and remove the Canon PIXMA MX490 entry.
  2. Open Settings > Apps > Installed apps and uninstall Canon IJ Scan Utility, Canon IJ Printer Assistant Tool, Canon MP Drivers, My Image Garden, Quick Menu, and any other Canon component tied to the MX490.
  3. Open Device Manager, expand Imaging devices and Print queues, right-click any Canon MX490 entries, and pick Uninstall device.
  4. Reboot.

On macOS:

  1. Open System Settings > Printers & Scanners and remove the PIXMA MX490.
  2. Remove Canon driver files from /Library/Printers/Canon/.
  3. For the ICA Scanner Driver, drag Canon entries from /Library/Image Capture/Devices/ to the Trash.
  4. Restart the Mac.

On Linux:

  1. Remove ScanGear MP first, then the IJ Printer Driver.
  2. On deb-based: sudo dpkg -r scangearmp-mx490series cnijfilter-mx490series (exact package names depend on Canon’s build; use dpkg -l | grep -i canon to list installed Canon packages first).
  3. On rpm-based: sudo rpm -e scangearmp-mx490series cnijfilter-mx490series (or whatever names appear in rpm -qa | grep -i canon).
  4. Remove the PIXMA MX490 from CUPS at http://localhost:631.

Technical rundown

Spec Value
Print technology Color inkjet (2-cartridge system)
Functions Print, scan, copy, fax (MFP)
Print speed Up to 8.8 ipm black, 4.4 ipm color (ESAT)
Print resolution Up to 4800 x 1200 dpi
Duplex printing Manual only (no automatic two-sided)
Photo print time Approximately 70 seconds for 4×6 borderless
ADF capacity 20 sheets (simplex scan only)
Scan resolution Up to 1200 x 2400 dpi optical, 19200 x 19200 dpi interpolated
Fax modem Super G3, 33.6 kbps, approximately 50-page memory
Paper capacity 100-sheet rear tray
Display Full Dot Matrix LCD (mono, non-touchscreen)
Connections Hi-Speed USB 2.0, Wi-Fi 802.11 b/g/n (2.4 GHz only); no Ethernet, no NFC
Mobile printing and scanning AirPrint, Mopria, Canon PRINT Inkjet/SELPHY, Access Point Mode
Windows support 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit), XP (32-bit)
macOS support Lion 10.7 through Sonoma 14 (Sequoia 15 and Tahoe 26 via AirPrint only)
Linux support IJ Printer Driver + ScanGear MP (deb and rpm archives, plus source)
Ink cartridges PG-245 standard black, PG-245XL high-yield black, CL-246 standard tri-color, CL-246XL high-yield tri-color

Frequently Asked Questions

How do I connect my Canon MX490 printer to my computer?

Two options. USB — plug a USB cable between the PIXMA MX490 and your computer, run the MP Drivers installer, pick USB Connection when the installer asks. Wi-Fi — pair the printer to your Wi-Fi network through the printer’s menu (Menu > LAN settings > Wireless LAN setup), then run the installer and pick Wireless LAN Connection. The MX490 has no Ethernet port, so wired network isn’t an option. On a dual-band router, make sure you’re connecting to the 2.4 GHz SSID — the MX490’s Wi-Fi radio is 2.4 GHz only.

How to download Canon PIXMA drivers?

Scroll up to the Driver files section on this page. The MP Drivers (33.87 MB for Windows) is Canon’s recommended download — one unified installer with the print driver, scanner driver, fax driver, and ScanGear utility for Windows 11 down to Windows XP. On macOS, pick components for your macOS version: CUPS Printer Driver plus ICA Driver for Big Sur 11 through Sonoma 14, or the Full Driver and Software Package for legacy macOS. For Linux, the IJ Printer Driver handles print and ScanGear MP handles scan — both come as .tar.gz archives containing the real .deb or .rpm package. For other Canon PIXMA models, each printer has its own driver page with its own file set.

How to install the Canon MX490 printer without a CD?

You don’t need the original CD. Download the MP Drivers installer from the Windows section on this page (33.87 MB), right-click the .exe, pick Run as administrator, accept the license, pick USB or Wireless as your connection method, and follow the prompts. The installer handles everything the CD would — print driver, scanner driver, fax driver, and IJ Scan Utility all in one run. For macOS, download the CUPS Printer Driver and ICA Driver pair for your macOS version; for Linux, the IJ Printer Driver and ScanGear MP archives.

Why isn’t my Canon MX490 printer connecting to Wi-Fi?

Several things to check. First, confirm your router exposes a 2.4 GHz SSID — the MX490’s Wi-Fi radio is 802.11 b/g/n (2.4 GHz only) and won’t see a 5 GHz-only network. Second, pair the printer to Wi-Fi through its menu (Menu > LAN settings > Wireless LAN setup > Standard setup) before running the driver installer — this way the installer finds the printer by IP address rather than trying to pair it during install. Third, if the connection drops after pairing, move the printer closer to the router during setup (2.4 GHz range falls off with distance faster than 5 GHz) and switch your router to a non-overlapping channel (1, 6, or 11). Fourth, on a dual-band router with band steering, connect your PC manually to the 2.4 GHz SSID during the install so both devices land on the same band.

Does the Canon PIXMA MX490 work on macOS Sonoma 14?

Yes. Canon publishes the CUPS Printer Driver for macOS 11 to 14 (16.5 MB) for printing and the ICA Driver for macOS 11 to 14 (3.11 MB) for scanning on Sonoma 14. Install both components separately — Canon doesn’t ship a unified installer for recent macOS versions. For macOS Sequoia 15 or Tahoe 26, there’s no official Canon driver; AirPrint handles basic printing, and the ICA Driver for 11-14 often continues to work for scanning despite not being officially supported.

What ink cartridges does the PIXMA MX490 use?

The MX490 uses a two-cartridge ink system: Canon PG-245 pigment black and CL-246 tri-color (cyan, magenta, yellow). The high-yield replacements are PG-245XL black and CL-246XL color — same cartridge body, more ink inside, lower cost per page. Canon ships the printer with starter PG-245 and CL-246 cartridges that print fewer pages than the full retail standard cartridges, so for a home office workload the XL replacements make sense to buy early.

Can the Canon PIXMA MX490 print on both sides automatically?

No. The MX490 prints single-sided only — it doesn’t have an automatic duplex unit. For a two-sided document, print odd pages first, flip the paper stack manually, then print even pages. If you need true automatic duplex on a Canon PIXMA MFP, the MX920-series and higher from the same era support it.