HP LaserJet P1006 Driver Download

The HP LaserJet P1006 is a compact monochrome laser printer from 2007 — print-only, USB-only, no scanner, no network, no LCD. It prints at 17 pages a minute at 600 x 600 dpi and relies on host-based rendering (your PC does the work of turning each page into print data). Driver support covers Windows 10 all the way back to Windows XP and Mac OS X Leopard 10.5 through macOS Monterey 12 — though HP’s Full Feature package for Windows is published only for Windows 7, Vista, and XP; modern Windows (10, 8.1, 8) uses the Plug and Play Basic Driver.

This page collects every current driver file HP publishes for the P1006, plus the install flow for each OS, honest notes on what’s missing from HP’s support for a 2007 model (no Windows 11, no macOS Ventura or newer, no native mobile printing), and the Microsoft legacy framework caveats that come with running a printer this age on modern Windows.

🖥️Supported Operating Systems

Windows

Windows10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit) — no Windows 11 driver published

macOS

macOSMonterey 12, Big Sur 11, Catalina 10.15, Mojave 10.14, High Sierra 10.13, Sierra 10.12, El Capitan 10.11, Yosemite 10.10, Mavericks 10.9, Mountain Lion 10.8, Lion 10.7, Snow Leopard 10.6, Leopard 10.5

Picking a driver for the LaserJet P1006

HP publishes two Windows driver paths for the P1006 and the right pick depends on your Windows version.

Full Feature Drivers and Software (171.21 MB) — Windows 7, Vista, and XP only. The complete install package: print driver, HP Status Monitor, HP Toolbox, scan support (if your P1006 variant has it — some package variants were published for similar P1005/P1009 series), and the supporting utilities. HP did not release this Full Feature package for Windows 10, 8.1, or 8 — those versions use the Plug and Play Basic Driver instead.

Plug and Play Basic Driver (4.01 MB for 64-bit, 3.55 MB for 32-bit) — Windows 10, 8.1, 8, 7, Vista, and XP. A minimal driver that provides print functionality only, no utilities. On Windows 10, 8.1, and 8 this is the only HP-published driver for the P1006 — the Full Feature package was never updated for those Windows versions.

Windows 11 is not in HP’s supported OS list for this model — HP did not publish a Windows 11 driver for the P1006. Some Windows 11 users have reported that the Windows 10 Plug and Play Basic Driver works through compatibility mode, but this is unofficial and unsupported.

On macOS, HP splits drivers by macOS era. For OS X Mavericks 10.9 through macOS Monterey 12 — the Printer Driver (584.43 MB). For OS X Lion 10.7 and Mountain Lion 10.8 — a separate Printer Driver (573.86 MB). For Mac OS X Leopard 10.5 — the legacy Full Feature Drivers and Software (10.55 MB). HP Easy Start (9.5 MB) is a small bootstrapper for macOS Big Sur 11 that downloads the right driver during install. HP’s macOS driver support stops at Monterey 12 — macOS Ventura 13 and newer fall back to AirPrint only.

Mac OS X Snow Leopard 10.6 isn’t covered by a dedicated driver download on this page. The Printer Driver for OS X 10.7 and 10.8 typically installs on 10.6 as well with light override, but this isn’t officially supported by HP.

HP LaserJet P1006 Drivers for Windows

Plug and Play Basic Driver for Windows 64-bit

Windows 10, 8.1, 8, 7, Vista, XP (64-bit) — the only driver option for modern Windows

4.01 MBDownload

Plug and Play Basic Driver for Windows 10, 8.1, 8, 7, Vista, and XP 32-bit

Windows 10, 8.1, 8, 7, Vista, XP (32-bit) — the only driver option for modern Windows

3.55 MBDownload

HP LaserJet P1006 Drivers for macOS

Easy Start for macOS 11

macOS Big Sur 11 — bootstrapper installer that downloads the right driver at runtime

9.5 MBDownload

Printer Driver for OS X 10.8 and 10.7

OS X Lion 10.7 and Mountain Lion 10.8 — legacy Printer Driver

573.86 MBDownload

Full Feature Drivers and Software for macOS 10.5

Mac OS X Leopard 10.5 — legacy Full Feature package

10.55 MBDownload

Pre-install checklist

  • Sign in to Windows or macOS with an account that has administrator rights.
  • Plug the P1006’s power cable into a wall outlet but leave the printer off. The installer tells you when to power it on.
  • Get a USB cable ready — the P1006 has no network interfaces of any kind, so USB is the only way to connect it to a computer. If you need to share this printer across a household, plan to share it from a Windows PC or Mac that stays powered on.
  • Remove the orange protective tape and open the cartridge access door. Pull the sealing strip tab from the HP CB435A toner cartridge before installing it in the printer.
  • Load plain paper in the 250-sheet main tray. The 1-sheet priority feed slot in front is for occasional envelope or label feeding.
  • Note that the P1006 has no LCD — all status comes from the two indicator LEDs on top: Ready (green), Attention (yellow). Install steps below reference these LEDs rather than menu navigation.
  • On modern Windows (10, 8.1, 8) or modern macOS (10.9+), download the appropriate driver before you connect USB. Windows 10 may install a generic driver automatically through Plug and Play, but HP’s Plug and Play Basic Driver gives better control.

Setting up on Windows

  1. Choose the right driver for your Windows version. On Windows 7, Vista, or XP, download the Full Feature Drivers and Software (171.21 MB) — this includes the HP Toolbox and Status Monitor. On Windows 10, 8.1, or 8, download the Plug and Play Basic Driver (4.01 MB for 64-bit, 3.55 MB for 32-bit).
  2. Right-click the downloaded installer and pick Run as administrator.
  3. Accept the license agreement when the installer prompts.
  4. Connect the USB cable between the printer and the PC when the installer tells you to. Power on the printer at that point.
  5. Let the installer complete and print a test page from the driver properties dialog.
  6. If you’re on Windows 11 and need to print to the P1006, HP has not published a Windows 11 driver for this model. Some users have had success installing the Plug and Play Basic Driver for Windows 10 in Windows 11 — right-click the .exe, pick Properties, open the Compatibility tab, and check “Run this program in compatibility mode for Windows 10.” This is unofficial and HP does not support it; your results may vary.
  7. On Windows 7, Vista, or XP, if the Full Feature installer stops with a .NET Framework error, install .NET Framework 2.0 or 3.5 from Microsoft’s legacy download page first, then re-run the HP installer.

Setting up on macOS

HP splits the macOS install flow by macOS era. The driver file for your macOS version matters — pick carefully.

On macOS Monterey 12 or Big Sur 11: HP Easy Start (9.5 MB) is the modern install path. Mount the zip, run Easy Start, let it download the right driver components. Alternatively, use the direct Printer Driver DMG for OS X 10.9 to macOS 12 (584.43 MB) — Easy Start is a bootstrapper for the same driver.

On OS X Yosemite 10.10, El Capitan 10.11, Sierra 10.12, High Sierra 10.13, Mojave 10.14, or Catalina 10.15: mount the Printer Driver DMG for OS X 10.9 to macOS 12 (584.43 MB) and run the installer pkg. This single driver covers nine macOS versions.

On OS X Mavericks 10.9: same as above — the 584.43 MB Printer Driver starts at 10.9.

On OS X Mountain Lion 10.8 or Lion 10.7: use the Printer Driver for OS X 10.7 and 10.8 (573.86 MB). This is a separate package from the 10.9+ driver.

On Mac OS X Snow Leopard 10.6: HP did not publish a dedicated 10.6 driver download. The Printer Driver for OS X 10.7 and 10.8 (573.86 MB) typically installs on 10.6 as well, though HP does not officially support this. If installation fails, your options are: upgrade macOS to 10.7+, use Apple’s built-in HP printer drivers (installed through Software Update when you add the printer in System Preferences), or print through a Windows PC sharing the printer.

On Mac OS X Leopard 10.5: install the Full Feature Drivers and Software for macOS 10.5 (10.55 MB) — a legacy package that includes the print driver plus HP’s monitoring utilities.

After install on any macOS version, add the printer in System Settings > Printers & Scanners (macOS 13+) or System Preferences > Printers & Scanners (macOS 12 and earlier) if it doesn’t appear automatically.

On macOS Ventura 13 or newer: HP did not publish a driver for this model on Ventura or later. AirPrint handles basic printing for USB-connected HP LaserJet printers on recent macOS — add the printer in System Settings > Printers & Scanners and macOS will install an AirPrint-compatible driver automatically for most cases. However, the P1006 is host-based and may not work reliably with AirPrint, which was designed for PostScript and PCL printers. If AirPrint fails, the practical path is to share the printer from a Windows PC on the same network.

Making sure it works

  • Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The HP LaserJet P1006 should appear in the printer list.
  • Print a test page from the driver properties dialog. First page out should be around 8 seconds from standby.
  • Check the two LEDs on top of the printer — the green Ready LED should be solid. If the yellow Attention LED is lit or blinking, something is wrong (paper jam, toner low, door open — the printer manual has the full LED code chart).
  • Try a multi-page print job to confirm continuous printing works. The P1006 is host-based, which means your PC renders each page — expect some CPU activity on the sender during large prints.
  • If you plan to print on both sides, remember the P1006 has no automatic duplex. You’ll need to print odd pages first, flip the stack, then print even pages. The print dialog may offer a “manual duplex” option that guides you through the flip.

Printing from phones (via a shared PC)

The HP LaserJet P1006 has no Wi-Fi, no Ethernet, no NFC, and no mobile printing support built in. Direct printing from a phone to the printer is not possible on this model.

The practical path is to share the P1006 from a Windows PC or Mac on your local network — the PC acts as a print server, and your phone prints to the PC, which forwards the job to the P1006 over USB.

On Windows: right-click the P1006 in Settings > Printers & scanners, pick Printer Properties, open the Sharing tab, and check “Share this printer.” Give it a share name, and the printer appears on the local network for other Windows PCs. For mobile, install HP Smart app on your phone, connect to the same Wi-Fi as the host PC, and the shared printer appears in the HP Smart print target list.

On macOS: open System Settings > General > Sharing, turn on Printer Sharing, and tick the P1006. AirPrint-compatible iOS devices on the same network can print to shared printers through the sharing host. Results vary — host-based printers like the P1006 sometimes don’t work reliably through AirPrint sharing.

Install problems and solutions

  • Full Feature installer stalls on Windows 7 or Vista. The Full Feature package needs Microsoft .NET Framework 2.0 or 3.5 installed before it can run its UI. If your Windows 7 install never received the Service Pack 1 update or you’re on vanilla Vista, install .NET Framework from Microsoft’s legacy download page first.
  • Windows 10 installs a generic driver automatically through Plug and Play. This is Windows’s own HP LaserJet class driver, not HP’s. It prints but lacks HP’s utilities and some quality options. Install the Plug and Play Basic Driver (3.55 or 4.01 MB) over the generic one for proper HP integration.
  • USB connection drops on Windows 10 or 11. Modern Windows power-management can suspend USB ports to save energy. Open Device Manager, expand Universal Serial Bus controllers, right-click USB Root Hub entries, pick Properties, open the Power Management tab, and uncheck “Allow the computer to turn off this device to save power.” Repeat for each USB Root Hub.
  • Printer prints blank pages. Shake the HP CB435A toner cartridge gently to redistribute toner, re-seat it in the printer, and try again. If blanks continue and the cartridge is older than two years, the toner may have hardened — replace the cartridge.
  • Plug and Play Basic Driver installs but printer doesn’t appear. The Basic Driver registers the printer with Windows’s print spooler only when the printer is physically connected via USB at the moment of install. Disconnect USB, run the installer, reconnect USB when prompted.
  • No driver on macOS Ventura 13 or newer. HP’s macOS driver stops at Monterey 12. On macOS Ventura 13 and later, AirPrint is the fallback but the P1006 is host-based and may not work reliably with AirPrint. The most reliable modern path is to share the printer from a Windows PC on the same network, then print to the shared queue from the Mac.
  • macOS Printer Driver DMG is unusually large (574 MB or 584 MB). HP’s older macOS driver bundles include the full HP software suite — HP Utility, HP Scan, scanner components, and more — which are the same for every HP printer in that series. The print driver itself is small; most of the bundle is utility software that you can decline during install if you want a leaner setup.

Age-related limitations

No Windows 11 driver. HP did not publish a Windows 11 driver for the LaserJet P1006. The Plug and Play Basic Driver for Windows 10 can sometimes work on Windows 11 in compatibility mode, but this is unofficial and unsupported by HP. If Windows 11 compatibility is critical, consider replacing the printer rather than relying on compatibility workarounds.

No driver on macOS Ventura 13 or newer. HP’s macOS support stops at Monterey 12. Ventura and later macOS can fall back to AirPrint, but the P1006’s host-based architecture doesn’t play nicely with AirPrint in every case. The most reliable path on newer macOS is sharing the printer from a Windows PC.

No network connectivity at all. The P1006 is USB-only — no Wi-Fi, no Ethernet, no Wi-Fi Direct, no NFC, no mobile pairing. If you need wireless or network printing on a budget, sharing the P1006 from a connected PC is the workaround; the cleaner solution is a modern networked printer.

Host-based printing architecture. The P1006 is a host-based printer — it has no PostScript or PCL interpreter on board, so your PC’s CPU renders every page into raw bitmap data before sending it over USB. On modern PCs this is invisible overhead, but it means the P1006 won’t work in print servers that expect PostScript or PCL (print management systems, certain enterprise print setups), and large PDFs or image-heavy pages can show measurable CPU activity on the host while printing.

No automatic duplex. The P1006 prints single-sided only. For two-sided documents, print odd pages, flip the stack, then print even pages. Some print dialogs offer a manual duplex flow that automates the page order.

Microsoft legacy framework phase-out. The P1006 drivers predate Microsoft’s phase-out of .NET Framework 2.0 and 3.5 on Windows 10 and 11. The Full Feature Drivers (for Windows 7, Vista, and XP) depend on legacy .NET components that aren’t installed by default on current Windows — if you’re forced to use Full Feature on Windows 7 today, install .NET Framework 2.0/3.5 first. On modern Windows (10, 8.1, 8), the Plug and Play Basic Driver doesn’t need legacy .NET and sidesteps this issue entirely.

HP CB435A toner availability. The CB435A cartridge is still manufactured but availability is thinning. Compatible-brand cartridges are widely sold and generally work, though HP’s own Status Monitor will flag non-HP cartridges on PCs with the Full Feature driver.

Starter toner has reduced yield. The P1006 ships with a starter CB435A cartridge rated at about 700 pages — roughly half the full cartridge yield (~1,500 pages). Keep a spare on hand if the printer is in regular use.

Google Cloud Print is not relevant. The P1006 predates Google Cloud Print and was never officially supported on it. Google retired Cloud Print in December 2020 anyway — the point is academic for this model.

Uninstalling the P1006 driver

On Windows:

  1. Open Settings > Printers & scanners and remove the HP LaserJet P1006 entry.
  2. Open Settings > Apps > Installed apps and uninstall HP LaserJet P1006 Driver, HP Toolbox, HP Status Monitor, and any other HP component tied to the P1006.
  3. Open Control Panel > Programs and Features as well — older HP components sometimes register only in the legacy Programs list.
  4. Open Device Manager, expand Print queues, right-click any HP LaserJet P1006 entries, and pick Uninstall device.
  5. Reboot.

On macOS:

  1. Open System Settings > Printers & Scanners and remove the P1006.
  2. Remove HP driver files from /Library/Printers/hp/ if they’re present.
  3. Drag the HP Utility app from /Applications/HP/ to the Trash if it’s installed.
  4. Restart the Mac.

P1006 quick facts

Spec Value
Print technology Monochrome laser (host-based)
Functions Print only (no scan, copy, or fax)
Print speed Up to 17 pages per minute
Print resolution 600 x 600 dpi
Duplex printing Manual only (no automatic two-sided)
First page out time About 8 seconds from Ready mode
Monthly duty cycle Up to 5,000 pages
Paper capacity 250-sheet main tray + 1-sheet priority feed + 125-sheet output
Memory 32 MB
Display None — two status LEDs (Ready, Attention)
Connections Hi-Speed USB 2.0 only — no Wi-Fi, no Ethernet, no network support
Mobile printing None natively — printer must be shared from a connected PC for any mobile printing
Print language Host-based (no PostScript, no PCL)
Windows support 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit) — no Windows 11 driver
macOS support Mac OS X Leopard 10.5 through macOS Monterey 12 (Ventura 13+ via AirPrint, unreliable)
Toner cartridge HP CB435A (approx. 1,500 pages) — starter cartridge about 700 pages
Dimensions and weight Compact desktop form factor, approximately 5 kg
Release year 2007

Frequently Asked Questions

How do I install the driver for HP LaserJet P1006?

Pick the right installer for your OS first — the HP LaserJet P1006 Drivers for Windows and HP LaserJet P1006 Drivers for macOS sections above list every current file. On Windows 7, Vista, or XP, download the Full Feature Drivers and Software (171.21 MB), right-click the .exe, pick Run as administrator, accept the license, and connect USB when the installer prompts. On Windows 10, 8.1, or 8, download the Plug and Play Basic Driver (4.01 MB for 64-bit or 3.55 MB for 32-bit) instead — HP didn’t publish Full Feature for those versions. On macOS Monterey 12 or Big Sur 11, use HP Easy Start (9.5 MB) or the Printer Driver for OS X 10.9 to macOS 12 (584.43 MB). On older macOS, pick the matching legacy package.

How do I download the HP LaserJet P1006 printer driver?

Scroll up to the HP LaserJet P1006 Drivers for Windows or HP LaserJet P1006 Drivers for macOS section on this page. For Windows 7, Vista, or XP, the recommended download is the Full Feature Drivers and Software (171.21 MB). For Windows 10, 8.1, or 8, download the Plug and Play Basic Driver — 4.01 MB for 64-bit Windows or 3.55 MB for 32-bit. For macOS Big Sur 11 or Monterey 12, HP Easy Start (9.5 MB) is the modern install flow. For older macOS, each era has its own dedicated package listed in the macOS section.

How do I connect the HP LaserJet P1006 to my computer?

USB only. The P1006 has no Wi-Fi, no Ethernet, and no other network interface — a USB Type-B cable from the printer to your PC’s USB port is the only way to connect. After plugging in and powering on, run the appropriate HP driver installer for your OS (see the Windows and macOS sections above). The installer registers the printer with your OS. If you need wireless or network printing with this model, the workaround is to share the printer from a PC that stays connected to it — the cleaner solution is to use a networked printer that was designed for that purpose.

Does the HP LaserJet P1006 work on Windows 11?

Not officially. HP did not publish a Windows 11 driver for the P1006. Some users have reported success running the Windows 10 Plug and Play Basic Driver on Windows 11 using compatibility mode — right-click the .exe, pick Properties, open the Compatibility tab, and check “Run this program in compatibility mode for Windows 10.” This workaround is unsupported by HP and results vary. For reliable Windows 11 printing, a modern printer with a current driver is the practical choice.

Does the HP LaserJet P1006 work on macOS Ventura or newer?

Not officially. HP’s macOS driver support for this model stops at macOS Monterey 12. On macOS Ventura 13, Sonoma 14, Sequoia 15, or Tahoe 26, AirPrint can sometimes handle basic printing to the P1006 when it’s attached to a Mac, but the P1006 is a host-based printer and AirPrint’s compatibility with host-based printers is inconsistent. If AirPrint doesn’t work, the practical path is to share the printer from a Windows PC on the same network and print to the shared queue from the newer Mac.

What toner does the HP LaserJet P1006 use?

The HP CB435A, a standard-yield monochrome toner cartridge rated at approximately 1,500 pages. HP does not publish a high-yield XL version for the P1006 — the CB435A is the only HP cartridge for this model. The printer ships with a starter cartridge rated at about 700 pages. Compatible third-party cartridges are widely sold, though HP’s Status Monitor on PCs with the Full Feature driver will flag non-HP cartridges.

Does the HP LaserJet P1006 have Wi-Fi?

No. The P1006 is a USB-only printer with no Wi-Fi, no Ethernet, no Wi-Fi Direct, and no mobile printing support built in. The only way to connect it to a computer is through a USB cable. If you need wireless printing with this model, you’d have to share the printer from a PC that stays connected to it over USB — any mobile device prints to that shared PC, which forwards the job to the P1006.