The Brother HL-L2460DW is a compact monochrome laser printer that lands squarely in Brother’s current lineup. It prints up to 36 pages a minute at 1200 x 1200 dpi, handles automatic two-sided printing by default, and ships with dual-band Wi-Fi (2.4 GHz and 5 GHz), Ethernet, and Hi-Speed USB 2.0. Driver support covers Windows 11, Windows 10, macOS Ventura 13 through Tahoe 26, and Linux through Brother-published deb and rpm packages.
This page has every current driver file for the HL-L2460DW, plus the install flow I use when setting one up fresh, notes on which Windows package fits which use case, and a Linux install walkthrough.
🖥️Supported Operating Systems
![]()
![]()
![]()
Which driver do I need for the HL-L2460DW?
Brother ships six separate downloads for Windows, and the right pick depends on what you’re trying to do.
The Full Driver and Software Package (205.97 MB) is the standard download for Windows 11 and Windows 10 — it installs the print driver, Brother Mobile Connect, the Status Monitor, and the setup wizard in one go. Use this if you’re setting the printer up for the first time or want the full Brother toolset.
The standalone Printer Driver (31.43 MB) is the smaller alternative — just the print driver without the extra utilities. Pick this for silent deployments, or if the Full Package is overkill for your setup.
The Enhanced Generic PCL Driver (1.00 MB for 64-bit, 1.01 MB for 32-bit) is a minimal PCL-only driver for environments that need a lightweight universal driver without the Brother-specific features.
The Universal Printer Driver for PCL (11.63 MB) is Brother’s own universal driver, intended for fleet deployment where one driver needs to cover multiple Brother printer models from a single install.
EasySetup (139.84 MB) is Brother’s guided setup utility — it walks a first-time user through connecting the printer, picking Wi-Fi, and installing drivers.
On macOS, Brother ships a single Full Software Package (12.52 MB) that covers macOS Ventura 13 through Tahoe 26.
On Linux, grab either the deb package (for Debian, Ubuntu, Mint) or the rpm package (for Fedora, RHEL, openSUSE) based on your distribution.
Brother HL-L2460DW Drivers for Windows
Brother HL-L2460DW Driver for macOS
Start Here
Full Software Package
Brother HL-L2460DW Drivers for Linux
Before you install
A few checks before running the installer save time later.
- Sign in to Windows (or macOS) with an account that has administrator rights. The installer needs elevation to register the print driver with the operating system.
- Plug the HL-L2460DW’s power cable into a wall outlet but leave it off. The installer asks you to power it on at the right moment.
- Decide whether you’re setting up over USB, Wi-Fi, or Ethernet. The installer prompts for connection type early.
- Remove the orange shipping tape from the toner cartridge and pull out any internal packing material before powering on.
- If you’re going wireless, note that the HL-L2460DW handles both 2.4 GHz and 5 GHz Wi-Fi — pick whichever band your home network uses.
- Close any old Brother utility that might be running from a previous printer install. The new installer can’t replace a driver that’s in use.
Install the HL-L2460DW driver step by step
Click the download link next to the Full Driver and Software Package in the Driver files section above and save the installer to your Downloads folder.
- Right-click the downloaded file and pick Run as administrator (Windows) or double-click the DMG and open the installer package (Mac).
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks: USB, Wireless, or Wired Network.
- If you picked USB, connect the printer to your computer with a USB cable and power the printer on when the installer tells you to.
- If you picked Wireless, the installer walks you through picking your Wi-Fi network on the printer’s LCD. Use the up/down arrow buttons to scroll the SSID list, OK to pick, and type the Wi-Fi password using the same buttons. You can also use WPS: press the WPS button on your router, then hold the Wi-Fi button on the printer within two minutes.
- If you picked Wired Network, connect an Ethernet cable between the printer and your router or switch. The installer finds the printer by IP address.
- Let the installer finish — the Full Package extracts and registers the driver, Brother Mobile Connect, and the Status Monitor.
- When install completes, print a test page from the driver properties dialog.
Install the HL-L2460DW driver on Linux
Brother publishes the HL-L2460DW Linux driver as separate deb and rpm packages. Pick the one that matches your distribution.
On Debian, Ubuntu, or Mint, open a terminal in the folder that holds the downloaded .deb file and run:
sudo dpkg -i hll2460dwpdrv-*.deb
On Fedora, RHEL, or openSUSE, from the folder holding the downloaded .rpm file:
sudo rpm -ihv --nodeps hll2460dwpdrv-*.rpm
After the package installs, add the printer through your distribution’s print settings. On a GNOME or KDE desktop, open Settings > Printers, click Add Printer, and pick the HL-L2460DW from the list — CUPS picks the right driver automatically. Test the install by right-clicking the printer in the list and running Print Test Page.
For a USB connection, plug the printer in first, then run the add-printer step. For a network connection, make sure the printer is already on your Wi-Fi or Ethernet network — the add-printer dialog discovers it via Bonjour or IPP.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The Brother HL-L2460DW should appear in the list with a green “Ready” status.
- Print a test page from the driver properties dialog. The first page should be out in around 8.5 seconds from standby.
- Check the LCD on top of the printer — it should show “Ready” text and, on a wireless connection, a four-bar Wi-Fi signal strength indicator.
- The Wi-Fi LED should be solid green when the printer is paired with your network. If it’s blinking, the printer is still trying to connect.
Print from your phone or tablet
The HL-L2460DW works with AirPrint out of the box on iPhone and iPad — add the printer in iOS Settings > General > AirPrint, then print from any app with a Share sheet. Make sure the iPhone and the printer are on the same Wi-Fi network.
For Android, install Brother Mobile Connect from Google Play. The app picks up the HL-L2460DW on the same Wi-Fi network and handles printing, driver updates, and consumables tracking. Mopria Print Service is another Android option if your device has it built in.
Wi-Fi Direct is a third option — the printer broadcasts its own Wi-Fi network for direct phone-to-printer printing without a router. Enable it from the Wi-Fi menu on the printer’s LCD.
If install fails
The Full Package is a 206 MB installer, so a corrupted download is the most common failure. The checks below work through the usual trouble spots.
- Full Driver Package install fails or stalls. Delete the downloaded installer and re-download it — the bigger the file, the higher the chance of a bad download. If re-download doesn’t fix it, try the smaller standalone Printer Driver (31.43 MB) as a fallback for basic printing.
- Installer launches but can’t find the printer over Wi-Fi. Pair the printer to your Wi-Fi first through the printer’s own LCD menu (Menu > Network > WLAN > Setup Wizard), then run the installer and pick Wireless — this time it finds the printer by IP address instead of trying to pair it from scratch.
- Printer not found over USB. Switch to a different USB port — prefer a direct port on the computer over a hub. Swap the cable if you have a spare.
- Wi-Fi install can’t find the printer. Band steering on modern routers can land the PC and printer on different bands even when both support dual-band. Connect the PC to the same SSID as the printer manually, or use Ethernet for the install.
- Compatibility mode cascade. If the installer fails to launch, right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for”. Try Windows 8 first.
- EasySetup as an alternative. If the Full Package install fails on a first-time setup, try the EasySetup download (139.84 MB) instead — it’s Brother’s guided wizard built for first-time installs on fresh systems.
Known issues with the HL-L2460DW
Default print speed is slower than the 36 ppm spec. Brother USA notes that the 36 ppm top speed requires changing the default print setting — out of the box, the printer runs at a lower speed. Open the printer properties dialog in Windows (Settings > Printers & scanners > Brother HL-L2460DW > Printing preferences) and adjust the print quality or speed setting to unlock full speed.
Multiple Windows driver packages can confuse first-time buyers. Brother ships six separate Windows downloads for this printer (Full Driver, Printer Driver, Enhanced PCL for 64-bit, Enhanced PCL for 32-bit, Universal PCL, EasySetup). For home and small office use, the Full Driver and Software Package is almost always the right pick. The PCL variants and Universal driver are aimed at fleet environments where IT needs a single driver across multiple models.
Dual-band Wi-Fi + band steering. The HL-L2460DW handles both 2.4 GHz and 5 GHz Wi-Fi, which is a step up from older Brother models, but modern routers running band steering can still land the PC and printer on different bands temporarily during setup. If discovery fails, pair the printer to one specific SSID through its LCD menu first, then run the installer.
No touchscreen. The HL-L2460DW’s LCD is a text-only display with physical buttons for navigation (Menu, OK, Back, up/down arrows, Go). That’s a design choice for the sub-$300 compact mono laser category — the touchscreen models sit higher in Brother’s lineup. For wireless setup through the printer menu alone, allow a minute or two to type the Wi-Fi password character by character on the arrow buttons.
How to fully uninstall the HL-L2460DW driver
On Windows:
- Open Settings > Printers & scanners and remove the Brother HL-L2460DW entry.
- Open Settings > Apps > Installed apps and uninstall Brother Mobile Connect, Brother iPrint&Scan if present, and any other Brother component tied to the HL-L2460DW.
- Open Brother Utilities from the Desktop or All Programs if it’s installed, click Tools, and run Uninstall. Repeat for every Brother model listed in the model selector.
- Reboot.
- For a clean wipe before a fresh install, use Driver Store Explorer (RAPR) to remove the Brother driver package from the Windows driver store.
On macOS:
- Open System Settings > Printers & Scanners and remove the HL-L2460DW.
- Mount the original Full Software Package DMG and run the Uninstaller inside it, or remove the Brother driver files manually from
/Library/Printers/Brother/. - Restart the Mac.
On Linux:
sudo dpkg -r hll2460dwpdrv # Debian/Ubuntu sudo rpm -e hll2460dwpdrv # Fedora/RHEL
Brother HL-L2460DW at a glance
| Spec | Value |
|---|---|
| Print technology | Monochrome laser |
| Functions | Print only (no scan, copy, or fax) |
| Print speed | Up to 36 pages per minute |
| Print resolution | 1200 x 1200 dpi |
| Duplex printing | Automatic two-sided (on by default) |
| First page out time | 8.5 seconds (max, from Ready Mode) |
| Display | LCD with physical buttons (not touchscreen) |
| Paper capacity | 250-sheet tray + 1-sheet manual feed + 100-sheet output |
| Connections | Hi-Speed USB 2.0, Wi-Fi 802.11 a/b/g/n (2.4 GHz and 5 GHz), Ethernet, Wi-Fi Direct |
| Mobile printing | AirPrint, Mopria, Brother Mobile Connect, Wi-Fi Direct |
| Windows support | 11 (64-bit), 10 (32-bit and 64-bit) |
| macOS support | Ventura 13 through Tahoe 26 |
| Linux support | Yes — deb and rpm packages from Brother |
| Toner cartridge | TN830 (standard), TN830XL (high-yield) |
| Drum unit | DR830 (up to 15,000 pages) |
Frequently Asked Questions
Where can I download the Brother HL-L2460DW driver software?
Scroll up to the Driver files section on this page. The Full Driver and Software Package for Windows 11 and 10 (205.97 MB) is Brother’s recommended download for most users — it includes the print driver, Brother Mobile Connect, and the Status Monitor in one installer. If you only need the print driver without the extra utilities, grab the standalone Printer Driver (31.43 MB). All downloads on this page are the current Brother-released files — no signup walls, no bundled toolbars.
Does the HL-L2460DW driver work on Windows 11?
Yes. Brother publishes a Full Driver and Software Package specifically for Windows 11 (64-bit) and Windows 10 (both 32-bit and 64-bit). Grab it from the Driver files section above. The Full Package installs the print driver, Brother Mobile Connect, and the Status Monitor in one run. If the Full Package fails to install, the smaller standalone Printer Driver (31.43 MB) covers basic printing on Windows 11 without the extra utilities.
Does the HL-L2460DW driver work on Mac?
Yes. Brother publishes a Full Software Package for macOS that covers macOS Ventura 13, Sonoma 14, Sequoia 15, and Tahoe 26 — a single 12.52 MB download handles all four macOS versions. Download it from the Driver files section above, double-click the DMG, and run the installer package. The driver registers with macOS Printers & Scanners automatically.
How do I install the HL-L2460DW on Linux?
Brother publishes two Linux driver packages for the HL-L2460DW — a deb package (90.62 KB) for Debian, Ubuntu, and Mint, and an rpm package (105.39 KB) for Fedora, RHEL, CentOS, and openSUSE. Download the one that matches your distribution, then install with sudo dpkg -i hll2460dwpdrv-*.deb or sudo rpm -ihv --nodeps hll2460dwpdrv-*.rpm. After the package installs, add the printer through your desktop’s print settings.
How do I set up the HL-L2460DW on my wireless network?
Three options. Run the Full Driver installer on Windows or macOS and pick Wireless when the connection screen appears — the installer walks you through picking your SSID on the printer’s LCD. Second option: use WPS — press the WPS button on your router, then hold the Wi-Fi button on the printer within two minutes. Third option: use the printer’s LCD menu directly — go to Menu > Network > WLAN > Setup Wizard, pick your SSID with the arrow buttons, and enter the Wi-Fi password character by character. The HL-L2460DW supports both 2.4 GHz and 5 GHz Wi-Fi.
What toner and drum does the HL-L2460DW use?
The HL-L2460DW uses the Brother TN830 standard-yield toner or the TN830XL high-yield toner — same cartridge body, different page yield. The drum unit is the DR830, rated at up to 15,000 pages per Brother Canada. Replace the toner when print quality fades or the printer’s LCD shows a low-toner message; replace the drum when the drum unit nearing replacement indicator triggers.
Is the Brother HL-L2460DW driver free to download?
Yes. All HL-L2460DW driver files are free. No signup, no payment, no account required.
