Download the Drivers and Utilities Combo Package for your Windows version from the files below, run it as administrator, and the ET-15000 brings print, scan, copy, and fax online in one install. That’s the short version. The long version covers the full driver and software matrix on both Windows and macOS, explains when to skip the Combo Package in favor of the standalone Printer Driver or Scanner Driver, and walks through the quirks worth knowing on this wide-format EcoTank including the A3+ paper path at the rear and the 35-sheet ADF on top.
🖥️Supported Operating Systems
Which driver do I need for the EcoTank ET-15000?
On Windows, three driver families cover the ET-15000. The Drivers and Utilities Combo Package is a small 14 MB bootstrap installer that pulls printer, scanner, fax, and Epson utilities together during the first run. The standalone Printer Driver is a 29-33 MB package, the Scanner Driver and Epson Scan 2 Utility bundle is 64 MB, and the Remote Print Driver covers printing from an app that targets a remote network printer.
Windows 11 is 64-bit only. Windows 10, 8.1, 8, 7, and Vista each have 32-bit and 64-bit builds, and the driver list has a package for each architecture. Windows XP is supported only through the Remote Print Driver.
On macOS, the Drivers and Utilities Combo Package covers Mac OS X Lion 10.7 through macOS Ventura 13 in one installer. The standalone Printer Driver and Scanner Driver reach further, from Mac OS X Snow Leopard 10.6 up to macOS Sonoma 14. Remote Print has two macOS packages: one for macOS 10.6 through 14, and a dedicated one for Mac OS X Leopard 10.5 only.
Epson EcoTank ET-15000 Drivers for Windows
Epson EcoTank ET-15000 Drivers for macOS
Before you install
- Run the installer as administrator on Windows (right-click the downloaded file and pick Run as administrator). On macOS, your account needs to be able to install signed drivers, and you may see a system prompt asking you to approve the Epson installer during the first run.
- Close any open print dialogs, scan apps, or image editors before you start. The installer registers printer, scanner, and fax components, and an open app holding one of those can stall the setup.
- Make sure the PC has an active internet connection. The Combo Package is a bootstrap that downloads the real driver files from Epson during setup.
- Have the printer powered on and the ink tanks filled with the Epson 502 starter bottles (Black 127 mL plus Cyan, Magenta, and Yellow at 70 mL each) before you run the installer.
- Decide how you want to connect. The ET-15000 supports USB, Wi-Fi, and Ethernet. For Wi-Fi, have your network name and password handy. For Ethernet, plug the cable in and the printer gets an IP from your router automatically.
- If you plan to use the fax function, have your phone line connected to the printer’s LINE port and your fax number ready for the setup wizard.
Install the EcoTank ET-15000 driver step by step
- Click the download link next to the Drivers and Utilities Combo Package card above. Your browser saves the installer to your Downloads folder.
- Right-click the file and pick Run as administrator. If Windows asks about letting the app make changes, say yes.
- Follow the on-screen prompts for connection type. For USB, plug the cable into a direct port on the PC when the installer asks. For Wi-Fi, pick your network name from the list and enter the password. For Ethernet, plug the cable in and pick Ethernet when prompted.
- Let the installer finish. The Combo Package downloads the printer driver, scanner driver, fax driver, and Epson utilities one after the other during this step.
- Print a test page from Windows Settings > Printers & scanners > EPSON ET-15000 Series > Printer properties > Print Test Page.
Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.
What to check after install
- Open Settings > Printers & scanners. The EPSON ET-15000 Series entry should show as Ready, not offline.
- Set the ET-15000 as the default printer if that’s how you want it. Turn off “Let Windows manage my default printer” so Windows doesn’t swap it for the last-used printer.
- Check that the scanner shows up in Settings > Devices and in the Epson Scan 2 Utility. The Combo Package installs both halves; if only print is working, the scanner piece didn’t register.
- Test the 35-sheet ADF, not just the flatbed. Load a page or two in the ADF and scan through Epson Scan 2 to confirm the feeder works end-to-end.
- Try a borderless 13 x 19 inch print through the rear specialty-paper feed to confirm the wide-format path works. The A3+ path is manual-feed one sheet at a time, not through the 250-sheet front tray.
- If you’ll use fax, send a test fax to a known number from the printer’s touchscreen to confirm the fax module is up.
Print from your phone or Chromebook
The ET-15000 works with AirPrint on iPhone and iPad, Mopria Print Service on Android, the Epson Smart Panel app on both, and voice-activated printing through Amazon Alexa once you register the printer with Epson Connect. For AirPrint and Mopria, the phone and the printer have to be on the same network. If the printer is on Ethernet and your phone is on Wi-Fi, they still need to be on the same subnet; most home routers handle that automatically, but office networks with separate VLANs can block discovery.
Chromebook users can add the ET-15000 through Settings > Advanced > Printing > Printers > Add Printer. Chrome OS discovers it over the network through CUPS.
If install fails
- Combo Package installer stalls at the component-download step. The 14 MB Combo Package is a bootstrap that pulls the real driver files from Epson during setup. If your internet connection drops mid-download or a proxy blocks the second-stage fetch, the installer hangs. Rerun as administrator with a stable connection, or download the standalone Printer Driver and Scanner Driver packages above as a fallback that doesn’t need the online fetch.
- Previous Epson driver stuck in Windows. Open Settings > Printers & scanners, remove any older ET-15000 or EPSON ET series entries, open Control Panel > Programs and Features, uninstall any “EPSON Printer Software” entries, reboot, then rerun the installer.
- USB connection not detected. Try a different USB port on the PC (prefer a direct port over a hub), swap the USB cable, and confirm the printer is powered on with the 2.7 inch touchscreen lit before clicking Next in the installer.
- Wi-Fi install can’t find the printer. The ET-15000 uses 2.4 GHz Wi-Fi. If your router broadcasts a single SSID for both 2.4 and 5 GHz and uses band steering, your PC may be on 5 GHz while the printer sits on 2.4 GHz, and discovery fails silently. Connect the PC to the 2.4 GHz band directly during setup, or use the Ethernet port, which sidesteps the Wi-Fi band question entirely.
- Ethernet setup doesn’t pick up the printer. Plug the Ethernet cable into both the printer and the router or switch, power-cycle the printer, and wait for the touchscreen to show a network icon. The printer pulls an IP from DHCP automatically. During install, pick Ethernet when the installer asks for connection type.
- Driver installs but printer shows offline. Open Settings > Printers & scanners, open the ET-15000 entry, and uncheck Use printer offline. If it flips back on its own, the printer’s network connection dropped. Reconnect from the printer’s touchscreen.
- Installer closes silently or hangs on Windows 11. Right-click the installer, open Properties, go to the Compatibility tab, and check Run this program in compatibility mode for. Try Windows 8 first since this driver supports Windows 10 natively. Save and run as administrator.
- Admin rights error. Make sure the installer runs as administrator (right-click > Run as administrator). On a standard user account, you’ll need an admin password at the UAC prompt.
If the scanner doesn’t work after install
- Scanner driver missing. If you installed the standalone Printer Driver instead of the Combo Package, the scanner piece wasn’t included. Run the Scanner Driver and Epson Scan 2 installer above to add it.
- Epson Scan 2 Utility won’t launch. The utility depends on the scanner driver install. Reinstall the Scanner Driver and Epson Scan 2 package, and the utility registers during setup.
- WIA entry missing in Windows Scan. Reboot once after the scanner driver install. Windows registers WIA (Windows Image Acquisition) scanners during startup, and the first login after a fresh install sometimes needs the reboot to pick it up.
- ADF won’t feed pages. The 35-sheet ADF has its own pickup mechanism. If pages jam or feed crookedly, check that the paper guides are flush against the stack, the paper is below the max line, and the pages aren’t curled or stuck together. The ADF handles A4-size originals; wider pages have to go on the flatbed.
- Scanner works in Epson Scan 2 but not in Windows Scan. Some third-party scan apps on Windows only read WIA, not Epson’s TWAIN interface. Use Epson Scan 2 as the primary scan application, or switch to NAPS2 which handles both.
Wide-format A3+ printing on the ET-15000
The ET-15000’s A3+ (13 x 19 inch) printing goes through the rear specialty-paper feed, not the 250-sheet front tray. This is a sheet-at-a-time path: load one or two sheets of A3+ or ledger-size paper vertically in the rear slot behind the ADF, then start the print. The printer feeds the sheet forward, prints, and ejects to the front output tray.
- Front tray is A4 only. The 250-sheet front tray handles Letter, Legal, A4, and smaller sizes. It does not fit A3+ paper. Don’t try to force A3+ into the front tray.
- Rear feed is manual. There is no capacity for a stack of A3+ paper in the rear. For a wide-format print run, you’ll load sheets as the printer calls for them.
- Driver setting matters. When you print A3+, pick 13 x 19 or A3+ as the paper size in the print dialog and set the paper source to Rear Paper Feed. The driver prompts the printer to pull from the rear slot instead of the front tray.
Ink refill and tank issues
The US ET-15000 uses Epson 502 ink bottles: Black 127 mL plus Cyan, Magenta, and Yellow at 70 mL each. European and other regional variants use Epson 102 instead, so if you bought the printer outside the US, check the label on the box to confirm your ink series before you reorder.
- Initial fill takes time on first setup. After you pour all four bottles into the tanks, the printer charges the ink system through its own primers. Don’t interrupt power during this charge or you’ll waste ink restarting. The 2.7 inch touchscreen walks through the fill and prime sequence.
- “Cartridge not recognized” after a refill. This model uses tanks, not cartridges, but the error can still appear if the refill wasn’t registered. Open the Epson Scan 2 Utility or the printer’s touchscreen, find the Reset Ink Levels option, and confirm you refilled each tank. The firmware tracks ink by estimate, not by sensor, so it needs to know you refilled.
- Blank pages after refill. If pages come out blank right after a refill, the print head nozzles may have dried during the empty period. Run a head cleaning from the printer’s maintenance menu, then a nozzle check pattern. Two or three cleaning cycles usually bring the nozzles back.
- 502 and 102 ink compatibility. The 502 series (US) and 102 series (EU) have different EcoFit keying. The bottle shape won’t physically fit a tank from the wrong region. The 522 bottles (used by newer ET-2803 and ET-4800) and 552 bottles (used by photo ET-8550) are also different keying and don’t fit the ET-15000 tanks.
Known issues with the EcoTank ET-15000
- Wi-Fi is 2.4 GHz only. The ET-15000 does not support 5 GHz Wi-Fi. On dual-band routers with a single SSID and band steering, the printer may fail to join the network during setup. Connect the PC to the 2.4 GHz band during the Wi-Fi install step, or use the Ethernet port instead.
- A3+ is rear-feed, single sheet at a time. The 13 x 19 inch wide-format path isn’t batched. For a 20-sheet A3+ run, you feed sheets one at a time as the printer prompts. The 250-sheet front tray is A4 and smaller only.
- Single-sided ADF scanning. The 35-sheet ADF handles one side per pass. For two-sided originals, flip the stack manually or step up to a model with duplex ADF.
- 1-year warranty in the US. The ET-15000 ships with a 1-year limited warranty in the United States, shorter than the 2-year coverage on newer business EcoTanks like the ET-4800. Keep the receipt.
- Regional ink differences. US units use Epson 502 ink; European and UK units use Epson 102 ink. The bottles are not interchangeable between regions.
- Combo Package needs internet during install. The 14 MB Combo Package on Windows (7 MB on macOS) is a bootstrap that downloads the full driver files from Epson during setup. If the install PC has no internet or a strict proxy, use the standalone Printer Driver, Scanner Driver, and Remote Print Driver packages above instead.
How to fully uninstall the EcoTank ET-15000 driver
On Windows:
- Open Settings > Printers & scanners, click the EPSON ET-15000 Series entry, and pick Remove.
- Open Control Panel > Programs and Features.
- Uninstall every ET-15000 entry you find (“EPSON Printer Software”, “Epson Scan 2”, “Epson Software Updater”, “Epson Remote Print Driver”, “Epson FAX Utility”).
- Reboot. This clears the driver out of the Windows Driver Store so the next install starts fresh.
On macOS, open System Settings > Printers & Scanners, select the ET-15000, click the minus button, then delete the Epson driver packages from /Library/Printers/EPSON if you want a complete removal.
Epson EcoTank ET-15000 at a glance
| Spec | Value |
|---|---|
| Type | Wide-format wireless EcoTank all-in-one inkjet with ADF, fax, and Ethernet (print, scan, copy, fax) |
| Release year | 2020 (May 2020) |
| SKU | C11CH96201 (US) / C11CH96401 (EU) |
| Print technology | PrecisionCore MicroPiezo 4-color (CMYK) drop-on-demand inkjet |
| Print resolution | Up to 4800 x 1200 optimized dpi |
| Print speed | 17 ISO ppm black / 9 ISO ppm color |
| Max paper size | 13 x 19 inch (A3+) through rear media feed; A4/Letter/Legal through 250-sheet front tray |
| Scanner | CIS flatbed with 35-sheet ADF (single-sided scan, A4 max) |
| Fax | Yes, built-in with Contact List |
| Ink (US) | Epson 502 bottles: Black 127 mL, Cyan/Magenta/Yellow 70 mL each |
| Ink (EU) | Epson 102 bottles |
| Duplex | Automatic 2-sided printing |
| Connectivity | Wi-Fi 2.4 GHz, Gigabit Ethernet, Hi-Speed USB 2.0 |
| Mobile printing | AirPrint, Mopria Print Service, Epson Smart Panel, Amazon Alexa voice printing |
| Chromebook | Supported through CUPS |
| Display | 2.7 inch color touchscreen |
| Paper handling | 250-sheet front tray + rear specialty-paper feed for A3+ |
| Supported OS | Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit); Windows XP via Remote Print Driver; macOS Sonoma 14 through Mac OS X Leopard 10.5 |
| Warranty | 1-year limited (U.S. and Canada); extendable to 3 years free с Epson EU registration |
| Country of origin | Philippines |
| Dimensions | 245 x 498 x 358 mm (H x W x D) |
Frequently Asked Questions
Where can I download the Epson ET-15000 driver and software?
Right here on this page. Scroll up to the Driver files section and pick the Drivers and Utilities Combo Package for Windows or the macOS Combo Package. Every file is sourced directly from Epson’s official release, with no signup walls or bundled toolbars, and the downloads are free.
How do I connect my Epson ET-15000 to a Wi-Fi network?
Download the Drivers and Utilities Combo Package above, run it as administrator, and pick Wi-Fi when the installer asks for connection type. The installer shows a list of nearby Wi-Fi networks; pick yours and enter the password. One catch worth knowing up front: the ET-15000 only supports 2.4 GHz Wi-Fi. On dual-band routers with a single SSID and band steering, your PC may try to add the printer through 5 GHz and discovery fails. Connect the PC to the 2.4 GHz band for the setup step, then switch back after. If you have Ethernet handy, that’s an easier alternative.
How do I reinstall the Epson ET-15000 driver?
Four steps: remove the printer in Settings > Printers & scanners, uninstall every “EPSON Printer Software”, “Epson Scan 2”, or “Epson FAX Utility” entry from Control Panel > Programs and Features, reboot, and download the Drivers and Utilities Combo Package above and run it as administrator. The reboot step is critical because it clears the driver from the Windows Driver Store so the fresh install registers cleanly.
Does the ET-15000 print on A3+ paper from the regular paper tray?
No. A3+ (13 x 19 inch) printing on the ET-15000 goes through the rear specialty-paper feed, not the 250-sheet front tray. Load one or two sheets of A3+ paper vertically in the rear slot behind the ADF, pick A3+ or 13 x 19 as the paper size in the print dialog, and set the paper source to Rear Paper Feed. The front tray handles Letter, Legal, A4, and smaller only.
Which Epson ink bottles does the ET-15000 use?
In the United States and Canada, the ET-15000 uses Epson 502 ink bottles: one Black (127 mL) plus Cyan, Magenta, and Yellow (70 mL each). In Europe and the UK, the same printer uses Epson 102 bottles instead. The two series have different EcoFit keying and are not interchangeable across regions. If you have leftover 502 bottles from an ET-2760, ET-3760, or ET-2850, those are the same series and fit the US ET-15000.
Does the ET-15000 work on Windows 11 and macOS Sonoma 14?
Yes to both. The Windows 11 (64-bit) driver is listed above as part of the Combo Package and the standalone 64-bit Printer Driver. For macOS Sonoma 14, use the standalone Printer Driver (Mac OS X 10.6 through macOS 14) and the matching Scanner Driver. The macOS Combo Package covers through Ventura 13 only, so Sonoma users should install the standalone packages.
How do I set up fax on the ET-15000?
Plug a standard phone line cable into the LINE port on the back of the ET-15000, then open the fax setup wizard from the 2.7 inch touchscreen. The wizard walks through entering your fax number, header name, and basic dial settings. The Epson FAX Utility, installed with the Combo Package, lets you send faxes from the PC too.
