Epson ET-4850 Driver Download

The EcoTank ET-4850 is Epson’s mid-range office all-in-one with fax, a 30-sheet ADF, and Ethernet, and the driver and software still install cleanly on Windows 11 and the current macOS Sequoia 15 release. Setup is straightforward: download the Drivers and Utilities Combo Package below, run it as administrator, and let it pull down the printer driver, scanner driver, fax driver, and Epson utilities during the first run. The install walkthrough and the fixes for the snags that come up most often on this model are below the downloads.

🖥️Supported Operating Systems
Windows

Windows11 (64-bit), 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit)
macOS

macOSSequoia 15 through Mac OS X Snow Leopard 10.6

Which driver do I need for the EcoTank ET-4850?

On Windows, three driver families cover the ET-4850. The Drivers and Utilities Combo Package is a tiny 2.3 MB bootstrap installer that pulls printer, scanner, fax, and Epson utilities together during the first run. The standalone Printer Driver is a 29-33 MB package, the Scanner Driver and Epson Scan 2 Utility bundle is 64 MB, and the Remote Print Driver is a separate download for printing from apps that target a remote network printer.

Windows 11 is 64-bit only. Windows 10, 8.1, 8, 7, and Vista each have 32-bit and 64-bit builds, and the driver list has a package for each architecture. Windows XP is supported only through the Remote Print Driver, not the main Printer Driver.

On macOS, the Drivers and Utilities Combo Package covers Mac OS X Lion 10.7 through macOS Sequoia 15 in one installer. Standalone Printer Driver, Scanner Driver, and Remote Print Driver packages extend the range down to Mac OS X Snow Leopard 10.6.

Epson EcoTank ET-4850 Drivers for Windows

Printer Driver (64-bit)

Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (64-bit). Printer driver package.

33.4 MBDownload

Printer Driver (32-bit)

Windows 10, 8.1, 8, 7, Vista (32-bit). Printer driver package.

29.2 MBDownload

Scanner Driver and Epson Scan 2

Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit). Scanner driver with the Epson Scan 2 utility.

64.34 MBDownload

Remote Print Driver (64-bit)

Windows 11 (64-bit), 10, 8.1, 8, 7, Vista, XP (64-bit). Driver for apps that target a remote network printer.

23.25 MBDownload

Remote Print Driver (32-bit)

Windows 10, 8.1, 8, 7, Vista, XP (32-bit). Driver for apps that target a remote network printer.

9.42 MBDownload

Epson EcoTank ET-4850 Drivers for macOS

Printer Driver

Mac OS X Snow Leopard 10.6 through macOS Sequoia 15. Printer driver package.

75.62 MBDownload

Scanner Driver and Epson Scan 2

Mac OS X Snow Leopard 10.6 through macOS Sequoia 15. Scanner driver with the Epson Scan 2 utility.

45.45 MBDownload

Remote Print Driver

Mac OS X Snow Leopard 10.6 through macOS Sequoia 15. Driver for apps that target a remote network printer.

26.03 MBDownload

Before you install

  • Run the installer as administrator on Windows (right-click the downloaded file and pick Run as administrator). On macOS, your account needs to be able to install signed drivers, and you may see a system prompt asking you to approve the Epson installer during the first run.
  • Close any open print dialogs, scan apps, or image editors before you start. The installer registers printer, scanner, and fax components, and an open app holding one of those can stall the setup.
  • Make sure the PC has an active internet connection. The 2.3 MB Combo Package is a bootstrap that downloads the real driver files from Epson during setup, so a dropped connection breaks it.
  • Have the printer powered on and the ink tanks filled with the Epson 502 starter bottles before you run the installer.
  • Decide how you want to connect. The ET-4850 supports USB, Wi-Fi, and Ethernet. For Wi-Fi, have your network name and password handy. For Ethernet, plug the cable in and the printer gets an IP from your router automatically.
  • If you plan to use the fax function, have your phone line connected to the printer’s LINE port and your fax number ready for the setup wizard.

Install the EcoTank ET-4850 driver step by step

  1. Click the download link next to the Drivers and Utilities Combo Package card above. Your browser saves the installer to your Downloads folder.
  2. Right-click the file and pick Run as administrator. If Windows asks about letting the app make changes, say yes.
  3. Follow the on-screen prompts for connection type. For USB, plug the cable into a direct port on the PC when the installer asks. For Wi-Fi, pick your network name from the list and enter the password. For Ethernet, plug the cable in and pick Ethernet when the installer asks.
  4. Let the installer finish. The Combo Package downloads the printer driver, scanner driver, fax driver, and Epson utilities one after the other during this step.
  5. Print a test page from Windows Settings > Printers & scanners > EPSON ET-4850 Series > Printer properties > Print Test Page.

Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.

What to check after install

  • Open Settings > Printers & scanners. The EPSON ET-4850 Series entry should show as Ready, not offline.
  • Set the ET-4850 as the default printer if that’s how you want it. Turn off “Let Windows manage my default printer” so Windows doesn’t swap it for the last-used printer.
  • Check that the scanner shows up in Settings > Devices and in the Epson Scan 2 Utility. The Combo Package installs both halves; if only print is working, the scanner piece didn’t register.
  • Test the 30-sheet ADF, not just the flatbed. Load a page or two in the ADF and scan through Epson Scan 2 to confirm the feeder works end-to-end.
  • If you’ll use fax, send a test fax to a known number from the 2.4 inch touchscreen to confirm the fax module is up.

Print from your phone or Chromebook

The ET-4850 works with AirPrint on iPhone and iPad, Mopria Print Service on Android, and the Epson Smart Panel app on both. The printer also supports voice-activated printing through Amazon Alexa, Google Assistant, and Siri once you register it with Epson Connect. For AirPrint and Mopria, the phone and the printer have to be on the same network.

Chromebook users can add the ET-4850 through Settings > Advanced > Printing > Printers > Add Printer. Chrome OS discovers it over the network through CUPS.

If install fails

  • Combo Package installer stalls at the component-download step. The 2.3 MB Combo Package is a tiny bootstrap that pulls the real driver files from Epson during setup. If your internet connection drops mid-download or a proxy blocks the second-stage fetch, the installer hangs. Rerun as administrator with a stable connection, or download the standalone Printer Driver and Scanner Driver packages above as a fallback that doesn’t need the online fetch.
  • Previous Epson driver stuck in Windows. Open Settings > Printers & scanners, remove any older ET-4850 or EPSON ET series entries, open Control Panel > Programs and Features, uninstall any “EPSON Printer Software” entries, reboot, then rerun the installer.
  • USB connection not detected. Try a different USB port on the PC (prefer a direct port over a hub), swap the USB cable, and confirm the printer is powered on with the 2.4 inch touchscreen lit before clicking Next in the installer.
  • Wi-Fi install can’t find the printer. The ET-4850 uses 2.4 GHz Wi-Fi. If your router broadcasts a single SSID for both 2.4 and 5 GHz and uses band steering, your PC may be on 5 GHz while the printer sits on 2.4 GHz, and discovery fails silently. Either connect the PC to the 2.4 GHz band directly during setup, or use the Ethernet port instead, which sidesteps the Wi-Fi band question entirely.
  • Ethernet setup doesn’t pick up the printer. Plug the Ethernet cable into both the printer and the router or switch, power-cycle the printer, and wait for the touchscreen to show a network icon. The printer pulls an IP from DHCP automatically. During install, pick Ethernet when the installer asks for connection type.
  • Driver installs but printer shows offline. Open Settings > Printers & scanners, open the ET-4850 entry, and uncheck Use printer offline. If it flips back on its own, the printer’s network connection dropped. Reconnect from the printer’s touchscreen.
  • Installer closes silently or hangs on Windows 11. Right-click the installer, open Properties, go to the Compatibility tab, and check Run this program in compatibility mode for. Try Windows 8 first since this driver supports Windows 10 natively. Save and run as administrator.
  • Admin rights error. Make sure the installer runs as administrator (right-click > Run as administrator). On a standard user account, you’ll need an admin password at the UAC prompt.

If the scanner doesn’t work after install

  • Scanner driver missing. If you installed the standalone Printer Driver instead of the Combo Package, the scanner piece wasn’t included. Run the Scanner Driver and Epson Scan 2 installer above to add it.
  • Epson Scan 2 Utility won’t launch. The utility depends on the scanner driver install. Reinstall the Scanner Driver and Epson Scan 2 package, and the utility registers during setup.
  • WIA entry missing in Windows Scan. Reboot once after the scanner driver install. Windows registers WIA (Windows Image Acquisition) scanners during startup, and the first login after a fresh install sometimes needs the reboot to pick it up.
  • ADF won’t feed pages. The 30-sheet ADF has its own pickup mechanism. If pages jam or feed crookedly, check that the paper guides are flush against the stack, the paper is below the max line, and the pages aren’t curled or stuck together. The ADF handles single-sided scanning only; two-sided originals need to be flipped manually.
  • Scanner works in Epson Scan 2 but not in Windows Scan. Some third-party scan apps on Windows only read WIA, not Epson’s TWAIN interface. Use Epson Scan 2 as the primary scan application, or switch to NAPS2 which handles both.

Ink refill and tank issues

The ET-4850 uses Epson 502 ink bottles, same series as the ET-2760, ET-3760, ET-2850, and ET-15000. The starter set in the box is one 127 mL black bottle and 70 mL bottles of cyan, magenta, and yellow. Epson’s published yields are 7,500 pages black and 6,000 pages per color bottle — about two years of ink for typical home office use.

  • Initial fill takes time on first setup. After you pour all four bottles into the tanks, the printer charges the ink system through its own primers. Don’t interrupt power during this charge or you’ll waste ink restarting. The 2.4 inch touchscreen walks through the fill and prime sequence.
  • “Cartridge not recognized” after a refill. This model uses tanks, not cartridges, but the error can still appear if the refill wasn’t registered. Open the Epson Scan 2 Utility or the printer’s touchscreen, find the Reset Ink Levels option, and confirm you refilled each tank. The firmware tracks ink by estimate, not by sensor, so it needs to know you refilled.
  • Blank pages after refill. If pages come out blank right after a refill, the print head nozzles may have dried during the empty period. Run a head cleaning from the printer’s maintenance menu, then a nozzle check pattern. Two or three cleaning cycles usually bring the nozzles back.
  • 502 vs 522 and other bottle series. The ET-4850 uses 502 bottles, same as the ET-2760, ET-3760, ET-2850, and ET-15000. If you’re coming from the earlier ET-4800 (which uses 522 bottles) or the ET-2803 (also 522), the leftover 522 bottles are NOT compatible with the ET-4850. Epson keys each series separately, so the wrong bottle won’t physically fit the tank opening. Similarly, the 552 bottles used by the photo ET-8550 don’t fit either.

Known issues with the EcoTank ET-4850

  • Wi-Fi is 2.4 GHz only. The ET-4850 does not support 5 GHz Wi-Fi. On dual-band routers with a single SSID and band steering, the printer may fail to join the network during setup. Connect the PC to the 2.4 GHz band during the Wi-Fi install step, or use the Ethernet port instead.
  • Model is discontinued on Epson’s site. Epson lists the ET-4850 as Discontinued and points to the ET-4950 as its replacement in the lineup. Drivers for the ET-4850 are still available, but new firmware updates are unlikely. I recommend downloading and archiving the driver packages you need from this page in case Epson pulls them later.
  • Single-sided ADF only. The 30-sheet ADF handles one side per pass. The printer does automatic 2-sided printing, but scanning two-sided originals requires flipping the stack manually. For true duplex ADF scanning, Epson has the ET-5850 and higher-tier models.
  • Color accuracy is document-focused, not photo. Per TechRadar’s review, the color accuracy on the ET-4850 is slightly off for photo work: the dye-based CMY inks don’t match the realism you get from dedicated photo printers. For documents and everyday prints the output is strong, but if photo quality matters, look at the EcoTank Photo line (ET-8550) instead.
  • Combo Package needs internet during install. The 2.3 MB Combo Package on Windows is a bootstrap that downloads the full driver files from Epson during setup. If the install PC has no internet or a strict proxy, use the standalone Printer Driver and Scanner Driver packages above instead.

How to fully uninstall the EcoTank ET-4850 driver

On Windows:

  1. Open Settings > Printers & scanners, click the EPSON ET-4850 Series entry, and pick Remove.
  2. Open Control Panel > Programs and Features.
  3. Uninstall every Epson ET-4850 entry you find (“EPSON Printer Software”, “Epson Scan 2”, “Epson Software Updater”, “Epson Remote Print Driver”, “Epson FAX Utility”).
  4. Reboot. This clears the driver out of the Windows Driver Store so the next install starts fresh.

On macOS, open System Settings > Printers & Scanners, select the ET-4850, click the minus button, then delete the Epson driver packages from /Library/Printers/EPSON if you want a complete removal.

Epson EcoTank ET-4850 at a glance

Spec Value
Type Wireless EcoTank all-in-one inkjet with ADF, fax, and Ethernet (print, scan, copy, fax)
Release year 2023 (discontinued on Epson’s site, successor is ET-4950)
SKU C11CJ60201 (Black) / C11CJ60202 (White)
Print technology PrecisionCore MicroPiezo 4-color (CMYK) drop-on-demand inkjet
Print resolution Up to 4800 x 1200 dpi
Print speed 15.5 ISO ppm black / 8.5 ISO ppm color
First page out time Approximately 9 seconds
Duty cycle 5,000 pages per month
Scanner Color flatbed with 30-sheet ADF (single-sided scan), CIS line sensor, 48-bit color input / 24-bit output
Fax Yes, built-in
Ink Epson 502 bottles: Black 127 mL, Cyan/Magenta/Yellow 70 mL each
Page yield per set Up to 7,500 pages black / 6,000 pages color
Duplex Automatic 2-sided printing (single-sided scan)
Connectivity Wi-Fi 2.4 GHz, Ethernet, Hi-Speed USB
Mobile printing AirPrint, Mopria Print Service, Epson Smart Panel, Alexa, Google Assistant, and Siri voice-activated printing
Chromebook Supported through CUPS
Display 2.4 inch color touchscreen
Paper tray 250-sheet front tray
Max paper size 8.5 x 47.2 inch (long-length through rear feed); Letter and Legal through front tray
Supported OS Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit); Windows XP via Remote Print Driver; macOS Sequoia 15 through Mac OS X Snow Leopard 10.6
Color options Black and White case colors

Frequently Asked Questions

Where can I download the Epson EcoTank ET-4850 driver and software?

Right here on this page. Scroll up to the Driver files section and pick the Drivers and Utilities Combo Package for Windows or the macOS Combo Package. Every file is sourced directly from Epson’s official release, with no signup walls or bundled toolbars, and the downloads are free. Since the ET-4850 is discontinued on Epson’s site, I recommend saving a copy of the installer you need in case Epson changes the download later.

How do I connect my Epson ET-4850 to my computer?

Download the Drivers and Utilities Combo Package above, run it as administrator, and follow the prompts. The installer asks whether you want USB, Wi-Fi, or Ethernet. For USB, plug the cable in when prompted. For Wi-Fi, pick your network name from the list the installer shows and enter the password. For Ethernet, plug the cable in and pick Ethernet when the installer asks. The full walkthrough is in the Install section above.

How do I troubleshoot the Epson ET-4850?

Start with the basics: confirm the printer is powered on, the 2.4 inch touchscreen is responsive, and the PC is on the same network if you’re going wireless. For install-time problems, the “If install fails” section above covers the top eight snags with fixes. For scanner issues, see “If the scanner doesn’t work after install” below the install walkthrough. For ink or tank errors, the “Ink refill and tank issues” section walks through the common ones. For anything specific to this model, the Known issues section flags the quirks worth knowing.

Does the ET-4850 work on Windows 11 and macOS Sequoia 15?

Yes to both. The Windows 11 (64-bit) driver is listed above as part of the Combo Package and the standalone 64-bit Printer Driver. For macOS Sequoia 15, use the Combo Package (Mac OS X 10.7 through macOS 15) or the standalone Printer Driver (Mac OS X 10.6 through macOS 15). Both reach macOS Sequoia 15 at the top.

Which Epson ink bottles does the ET-4850 use?

The ET-4850 uses Epson 502 bottles, one Black at 127 mL and one each of Cyan, Magenta, and Yellow at 70 mL. This is the same series as the ET-2760, ET-3760, ET-2850, and ET-15000. If you’re coming from the ET-4800 (which uses 522 bottles) or the ET-2803 (also 522), those leftover bottles won’t fit the ET-4850; Epson keys the bottle shape differently between series. The 552 bottles used by the photo ET-8550 are also incompatible.

What’s the difference between the ET-4850 and the newer ET-4950?

The ET-4950 is Epson’s direct successor to the ET-4850 in the same mid-range office supertank line. Epson’s product page for the ET-4850 points to the ET-4950 as the replacement model, so for a brand-new purchase the ET-4950 is the current option. If you already own an ET-4850, this page covers the drivers you need; the hardware and the driver model are stable, so there’s no urgent reason to replace a working ET-4850 just because it’s been superseded.

How do I uninstall the ET-4850 driver on Windows?

Four steps: remove the printer entry in Settings > Printers & scanners, uninstall every “EPSON Printer Software”, “Epson Scan 2”, “Epson FAX Utility”, or “Epson Software Updater” entry from Control Panel > Programs and Features, reboot, and clear residual files in C:\\ProgramData\\EPSON if any remain. The reboot clears the driver from the Windows Driver Store.