The PIXMA PRO-100 has been around since 2012, which means two things for driver install today. Canon still hosts a current Windows driver package (version 1.07) that officially lists Windows 11 support, and a CUPS driver set that covers macOS all the way back to Mac OS X Leopard. So the files you need exist. What’s less obvious is which of the Windows packages you actually want, how the Windows 11 install trips up in practice, and what the B200 error means if your printer refuses to wake up.
This page has every download you need, plus the install flow I follow when I set one of these up on a newer machine. I’ve also added a short note on the “white and orange” LED pattern that scares people when they first see it, and what to do about it.
Which driver do I need for the PIXMA PRO-100?
On Windows you really have two choices, and they do different things. The Printer Driver is the standard one. It covers Windows 11 down to XP and handles the regular print path, so for most people this is the right pick. The XPS Printer Driver is a separate download that sends a 16-bit color signal to the printer instead of 8-bit, which matters only if you’re pushing fine-art prints through an app that can use it. I recommend starting with the standard Printer Driver and only grabbing the XPS version if your workflow specifically calls for it.
The security patches are small files (around 42 KB each) that address a disclosed Canon vulnerability for specific Windows versions. Install the patch that matches your OS after the main driver is in place.
On macOS, Canon splits the CUPS driver into three packages by era. Pick the one that matches your Mac’s version and skip the others.
Canon PIXMA PRO-100 Drivers for Windows
🖥️Supported Operating Systems
![]()
![]()
Canon PIXMA PRO-100 Drivers for macOS
Before you install
A few things to line up so the install runs clean the first time.
- Sign in with a Windows account that has administrator rights. The installer prompts for elevation and will stop if it can’t get it.
- On a Mac, make sure your account can approve a system extension prompt (admin password handy).
- Connect the power cable and plug the PRO-100 into a wall outlet. Don’t power it on yet. The installer will tell you when to connect and turn it on.
- Decide now whether you’re installing over USB or Wi-Fi. Both work, but the installer asks early and the flows diverge from there.
- Close your photo editor and any color-managed print utility like Canon Print Studio Pro. They hold on to the old driver if you’re reinstalling, and the install can’t replace a driver that’s in use.
Install the PIXMA PRO-100 driver step by step
Click the download link next to the Printer Driver in the Driver files section above and save the installer to your Downloads folder. On Windows the file is a self-extracting EXE. On macOS it’s a DMG that mounts a package installer.
Walk through the installer:
- Right-click the downloaded file and pick Run as administrator (Windows) or double-click the DMG and open the package (Mac).
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks. Choose USB cable or Wireless LAN Connection.
- If you picked USB, connect the printer to your Mac or PC with a USB cable and turn it on when the installer tells you to. If you picked wireless, make sure the printer and your computer are on the same Wi-Fi network before you continue.
- Let the installer finish and run the test alignment page when it offers. Skipping alignment is fine on a known-good printer, but on a fresh setup I always run it.
Canon’s install page describes the Windows download this way: “Double-click the downloaded EXE file to decompress it, then installation will start automatically.” On Windows 11 you may also see a warning before the installer runs. Canon’s own guidance here is to continue through it: “A message may be displayed during the installation depending on the OS you are using, but continue the installation.”
Install the security patch that matches your Windows version after the main driver is in. The patch is tiny and installs in seconds.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The Canon PIXMA PRO-100 should appear in the list.
- Print a test page from the printer properties dialog. If the color looks off, that’s usually print head alignment or a paper type mismatch, not a driver problem.
- In your photo editor, open the print dialog and verify that Canon PIXMA PRO-100 is selectable and that the paper size dropdown includes your common formats (4×6 through 13×19).
- If you installed the XPS driver as well, you’ll see both entries. Label them so you don’t pick the wrong one later.
Print from your phone or tablet
The PRO-100 supports AirPrint on iPhone and iPad, which means you can print directly from Photos, Mail, Safari, or any iOS app with a Share sheet. No app install needed on the phone. Just make sure the PRO-100 and the iPhone are on the same Wi-Fi network.
For Android, the Canon PRINT Inkjet app handles setup and basic photo printing. Download it from Google Play, point it at your PRO-100 on the same Wi-Fi network, and it picks the printer up. Mopria Print Service is another option for Android devices that support it, though the Canon app gives better control over paper type and quality for photo output.
If install fails
Windows 11 is where most install trouble lands on this printer. Here are the fixes that resolve the common failure modes, in the order I’d try them.
- Installer closes silently or hangs at the connection step. Run the installer through Windows compatibility mode. Right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for”. Try Windows 8 first since the driver officially supports Windows 10 as its newest target. If the install still fails, step down to Windows 7, then Windows Vista (Service Pack 2), and Windows XP (Service Pack 3) as a last resort. Save after each change and run the installer as administrator each time.
- “Unable to install printer. Cannot complete this function” during manual add. Users on the Canon community forum report this on Windows 11 when the Add Printer wizard finds the PRO-100 but fails at the “Type a printer name” step. Remove the detected printer entry from Settings > Printers & scanners, uninstall any partial driver install from Apps, reboot, and run the full Canon installer (version 1.07, filename p86l-win-pro_100-1_07-ea32_2.exe) from scratch.
- Printer not detected over USB. Try a different USB port, prefer a direct port on the computer over a hub, and swap the cable if you have a spare. Confirm that the printer’s power light is lit before clicking Next in the installer.
- Previous Canon driver stuck. Open Settings > Printers & scanners, remove any older PIXMA PRO-100 entries, then open Apps > Installed apps and uninstall any Canon utility tied to the PRO-100. Reboot, then rerun the installer.
- Wireless install can’t find the printer. The PRO-100 uses 2.4 GHz Wi-Fi only. If your router runs band steering and parks your PC on 5 GHz, either temporarily disable band steering or connect your PC to the 2.4 GHz SSID for setup. Both devices need to be on the same network and the same 2.4 GHz band.
- Driver Store Explorer (RAPR) cleanup. As a last resort on Windows 11, Driver Store Explorer can wipe any stuck Canon driver package. Use it carefully, since it can remove more than you intended.
A note on the XPS driver
The XPS driver sends a 16-bit color signal to the printer instead of 8-bit, which matters only in specific workflows. On Canon Print Studio Pro, the XPS driver can cause the printer to produce blank sheets, while the standard driver prints correctly. Users on dpreview forums report that Lightroom Classic’s Print tab works fine with either driver. I’d install the standard driver first, and only add the XPS driver if your print workflow specifically needs 16-bit signal and you’ve confirmed that the app you print from behaves correctly with it.
Known issues with the PIXMA PRO-100
B200 error (print head failure). This is the one that worries people. The printer refuses to print, and Canon’s status utility on your PC reports B200. The LED pattern on the printer itself is distinctive: users on the Canon community describe alternating white and orange flashes followed by 10 orange pulses, repeating. Community posts on the Canon forum describe B200 as a print head overheat condition, and most reports end with a print head replacement rather than a driver or software fix. Before giving up, turn the printer off, unplug it for 10 minutes, and power it back on. If the B200 clears, print a few pages and see if it comes back. If it keeps returning, the print head itself is the usual culprit.
Windows 11 install isn’t always smooth. Canon added Windows 11 as a supported OS in Printer Driver version 1.07, but community threads on the Canon forum show users running into Add Printer wizard failures and detection problems that Canon’s standard install flow doesn’t resolve. The workarounds above (compatibility mode, full cleanup and reinstall) address most of these.
Microsoft legacy printer framework phase-out. Microsoft is phasing out the printer driver frameworks that older models like the PRO-100 rely on, so previously working drivers may stop functioning after a Windows 11 update. If the Canon driver fails after an update, add the printer using Windows’ built-in generic IPP class driver instead: Settings > Printers & scanners > Add device > “The printer that I want isn’t listed” > Add a printer using a TCP/IP address, then pick IPP as the protocol. Basic printing works, though you lose Canon’s color profiles and Canon Print Studio Pro integration.
Waste ink pad “near limit” or “full” message. On a printer this age, the internal ink absorber pad eventually fills up. The printer reports the status before it stops entirely. This isn’t a driver issue, and the fix is a service visit for pad replacement, not a software reset. Resetting the counter without replacing the pad doesn’t address the root issue.
How to fully uninstall the PIXMA PRO-100 driver
On Windows:
- Open Settings > Printers & scanners and remove the Canon PIXMA PRO-100 entry.
- Open Settings > Apps > Installed apps and uninstall Canon IJ Printer Driver, Canon IJ Printer Assistant Tool, and anything else with “Canon PIXMA PRO-100” in the name.
- Reboot.
- If you want a true clean wipe (useful before a fresh install), open Driver Store Explorer (RAPR), filter by Canon, and remove the PRO-100 driver package.
On macOS:
- Open System Settings > Printers & Scanners and remove the Canon PIXMA PRO-100.
- Mount the original CUPS driver DMG you used to install and run the Uninstaller package inside it if present. If not, Canon’s driver files live under
/Library/Printers/Canon/and can be removed manually. - Restart the Mac.
Canon PIXMA PRO-100 at a glance
| Spec | Value |
|---|---|
| Release year | 2012 |
| Print technology | 8-color ChromaLife 100+ dye-based inkjet |
| Maximum resolution | 4800 x 2400 dpi |
| Maximum paper size | 13 x 19 inches (A3+) |
| Supported paper sizes | 4×6, 5×7, 8×10, Letter, Legal, 11×17, 13×19 |
| Connections | USB (Hi-Speed), Wi-Fi (802.11 b/g/n, 2.4 GHz only), Ethernet, PictBridge |
| Mobile printing | AirPrint (iOS), Canon PRINT Inkjet app (Android), Mopria |
| Windows support | 11, 10, 8.1, 8, 7, Vista SP1+, XP SP3+ |
| macOS support | 10.5 through 14 (via three CUPS driver packages) |
| Linux support | No official driver |
| Weight | 43.2 lb |
| Print speed (13×19 color) | About 90 seconds per bordered print |
Frequently Asked Questions
Where can I download the Canon PIXMA PRO-100 driver software?
Scroll up to the Driver files section on this page. The Printer Driver for Windows (27.90 MB) covers Windows 11 down to XP. The CUPS Printer Driver for macOS comes in three versions by era, so pick the one that matches your Mac. All downloads on this page are the current Canon-released files, with no signup walls or bundled toolbars.
Does the PIXMA PRO-100 driver work on Windows 11?
Yes. Canon added Windows 11 as a supported OS in Printer Driver version 1.07. The install isn’t always clean on Windows 11, and community reports show cases where the Add Printer wizard fails with “Cannot complete this function” or the printer isn’t detected. If that happens, run the installer in Windows 8 compatibility mode first, then step down the cascade if needed.
Is the Canon PIXMA PRO-100 driver free to download?
Yes. All PRO-100 driver files are free. No signup, no payment, no account required.
Should I download the standard Printer Driver or the XPS Printer Driver?
Start with the standard Printer Driver. It covers the regular print path on every supported Windows version and is what Canon’s install guide points to by default. The XPS driver sends a 16-bit color signal to the printer instead of 8-bit, which matters only for fine-art workflows in apps that can use it. On Canon Print Studio Pro, users on dpreview forums report that the XPS driver produces blank sheets while the standard driver prints correctly. Install the XPS driver only if your workflow specifically needs it.
Does the PIXMA PRO-100 driver work on macOS Sonoma 14?
Yes. Grab the CUPS Printer Driver for macOS 11 to 14 from the Driver files section above. The same package covers Big Sur, Monterey, Ventura, and Sonoma.
What does the B200 error on the PIXMA PRO-100 mean?
B200 usually points to a print head overheat or failure. The printer itself shows the issue through the LED pattern (alternating white and orange flashes followed by 10 orange pulses, repeating), and Canon’s status utility on your PC reports the B200 code. Try unplugging the printer for 10 minutes before you power it back on. If B200 keeps returning, the print head itself is the usual culprit, and the fix is a print head replacement rather than a driver or software step.
How do I uninstall the PIXMA PRO-100 driver completely?
On Windows, remove the printer from Settings > Printers & scanners, then uninstall any Canon utility tied to the PRO-100 from Apps > Installed apps, and reboot. For a deeper wipe, Driver Store Explorer (RAPR) removes the driver package from the Windows driver store. On macOS, remove the printer from System Settings > Printers & Scanners and run the Uninstaller package from the original CUPS driver DMG.
