The Brother MFC-L2750DW is a compact monochrome laser multifunction printer with the full office feature set — print, scan, copy, and fax all in one unit. It prints at 36 pages a minute at 2400 x 600 dpi, scans both sides of a page in one pass through a 50-sheet ADF, and ships with a 2.7-inch color touchscreen, Wi-Fi, Ethernet, and NFC touch-to-connect for one-tap mobile pairing. Driver support covers Windows 11 down to Windows 7, macOS Yosemite 10.10 through Catalina 10.15, and Linux through Brother-published deb and rpm packages.
This page has every current driver file for the MFC-L2750DW, plus the install flow I use for first-time setup, important notes on the macOS situation (Brother stopped at Catalina 10.15 for this model), and a Linux section covering printing, scanning, and PC fax.
🖥️Supported Operating Systems
![]()
![]()
![]()
Which driver do I need for the MFC-L2750DW?
On Windows, the Full Driver and Software Package (407.14 MB) is the standard download — it installs the print driver, scanner driver, PC fax driver, Brother iPrint&Scan, the Status Monitor, Brother Utilities, and all supporting software in one go. Covers Windows 11 through Windows 7. For a lighter install over USB without the full suite, the Printer Driver and Scanner Driver for Local Connection (42.36 MB) covers print + scan only.
On macOS, Brother’s driver support for this model stops at macOS Catalina 10.15. For Catalina 10.15, download the Full Software Package (19.65 MB) or the standalone Printer Driver (7.11 MB). For OS X Yosemite 10.10 through macOS Mojave 10.14, the Full Software Package for 10.10-10.14 (19.37 MB) covers the range, or install the per-version Printer Driver and TWAIN Scanner Driver separately. On macOS Big Sur 11 and later, Brother doesn’t publish a dedicated driver for this model — AirPrint handles printing without any driver install, but Brother-specific scanner features aren’t available.
On Linux, install the printer driver (deb or rpm) for printing. For scanning, add the scanner driver matching your architecture (32-bit or 64-bit). For PC-to-fax sending, install the PC FAX Driver.
Brother MFC-L2750DW Drivers for Windows
Brother MFC-L2750DW Drivers for macOS
Start Here
Full Software Package (macOS 10.15)
Printer Driver (macOS 10.15)
Full Software Package (OS X 10.10 to macOS 10.14)
Printer Driver (macOS 10.14)
Printer Driver (OS X 10.10 to macOS 10.13)
TWAIN Scanner Driver (OS X 10.10 to macOS 10.13)
Brother MFC-L2750DW Drivers for Linux
Start Here
Printer Driver (deb package)
Printer Driver (rpm package)
Scanner Driver 64-bit (deb package)
Scanner Driver 64-bit (rpm package)
Scanner Driver 32-bit (deb package)
Scanner Driver 32-bit (rpm package)
PC FAX Driver (deb package)
PC FAX Driver (rpm package)
Before you install
A few checks before running the installer save time later.
- Sign in to Windows or macOS with an account that has administrator rights.
- Plug the MFC-L2750DW’s power cable into a wall outlet but leave the printer off. The installer asks you to power it on at the right moment.
- Decide whether you’re setting up over USB, Wi-Fi, or Ethernet. The installer prompts for connection type early.
- Remove the orange shipping tape from the toner cartridge and pull out the internal packing material before powering on.
- Load paper in the 250-sheet tray.
- If you plan to use fax, have the phone line ready to plug into the LINE jack on the back.
- If you plan to use NFC touch-to-connect pairing, have a compatible NFC-capable Android phone ready.
Install the MFC-L2750DW driver step by step on Windows
Click the download link next to the Full Driver and Software Package in the Driver files section above and save the installer to your Downloads folder.
- Right-click the downloaded file and pick Run as administrator.
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks: USB, Wireless, or Wired Network.
- If you picked USB, connect the printer to your computer with a USB cable and power the printer on when the installer tells you to.
- If you picked Wireless, the installer walks you through picking your Wi-Fi network on the 2.7-inch color touchscreen. Tap Settings > Network > WLAN > Setup Wizard, pick your SSID, and enter the Wi-Fi password with the on-screen keyboard. The MFC-L2750DW is 2.4 GHz only, so make sure your router has a 2.4 GHz SSID the printer can see. WPS also works — press the WPS button on your router, then tap the WPS option on the touchscreen within two minutes.
- If you picked Wired Network, connect an Ethernet cable between the printer and your router or switch. The installer finds the printer by IP address.
- Let the installer finish — the Full Package registers the print driver, scan driver, PC fax driver, Brother iPrint&Scan, and the Status Monitor.
- When install completes, print a test page and run a test scan to confirm both paths work.
Install the MFC-L2750DW driver on macOS
The right macOS install depends on your macOS version, and Brother’s support for this model has a hard cutoff at macOS Catalina 10.15.
On macOS Catalina 10.15: the Full Software Package (19.65 MB) handles print, scan, and PC fax in one install. For print-only, use the standalone Printer Driver (7.11 MB).
On macOS Mojave 10.14: use the Full Software Package for 10.10-10.14 (19.37 MB) or the dedicated Printer Driver for 10.14 (7.11 MB).
On OS X Yosemite 10.10 through macOS High Sierra 10.13: the Full Software Package for 10.10-10.14 covers the range. For individual package installs, add the Printer Driver for 10.10-10.13 (7.11 MB) and the TWAIN Scanner Driver for 10.10-10.13 (2.28 MB) separately.
On macOS Big Sur 11 and newer (Monterey 12, Ventura 13, Sonoma 14, Sequoia 15, Tahoe 26): Brother doesn’t publish a driver for this model on these macOS versions. Printing works through AirPrint — add the printer in System Settings > Printers & Scanners > Add Printer and pick the MFC-L2750DW from the network list. For scanning on macOS Big Sur and later, use the built-in macOS Image Capture or Preview apps; Brother-specific scan features (OCR, direct scan-to-PC from the printer) aren’t available without the Brother driver.
Install the MFC-L2750DW driver on Linux
The MFC-L2750DW needs several Linux packages for full functionality — printing, scanning, and PC faxing are separate drivers.
For printing on Debian, Ubuntu, or Mint:
sudo dpkg -i mfcl2750dwpdrv-*.deb
On Fedora, RHEL, or openSUSE:
sudo rpm -ihv --nodeps mfcl2750dwpdrv-*.rpm
Add the printer through your desktop’s print settings — Settings > Printers > Add Printer, pick the MFC-L2750DW from the list.
For scanning, install the scanner driver matching your architecture:
sudo dpkg -i brscan4-*.deb # 64-bit or 32-bit matching your system
# or
sudo rpm -ihv --nodeps brscan4-*.rpm
Test the scanner with scanimage -L — the MFC-L2750DW should appear in the SANE device list.
For PC faxing from Linux, install the PC FAX driver:
sudo dpkg -i brmfcl2750dwpcfax-*.deb
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The MFC-L2750DW should appear in both printer and scanner lists.
- Print a test page from the driver properties dialog. First page out should be around 8.5 seconds from standby.
- Run a test scan from Windows Fax and Scan or macOS Preview. Load a two-sided original into the ADF for the duplex test, since the MFC-L2750DW scans both sides in a single pass.
- Check the 2.7-inch color touchscreen — it should show the Home screen with Fax, Copy, Scan, Secure Print, and Shortcuts tiles.
- If you set up fax, send a test fax from the touchscreen.
- For NFC touch-to-connect, enable NFC in the Network menu and tap an NFC-capable Android phone against the NFC logo on the control panel to pair.
Print and scan from your phone or tablet
The MFC-L2750DW supports AirPrint for iPhone and iPad on the same Wi-Fi network. For scanning on iOS, install Brother iPrint&Scan from the App Store — it handles scan-to-phone from the ADF or the flatbed.
For Android, install Brother iPrint&Scan from Google Play, or use the NFC touch-to-connect feature: hold an NFC-capable Android phone against the NFC logo on the printer control panel to pair instantly. Mopria Print Service is another Android print option if your device has it built in.
Wi-Fi Direct lets your phone connect directly to the printer without a router — enable it from the Network menu on the touchscreen.
If install fails
The checks below cover the common failure modes, in the order I’d try them.
- Full Driver Package installer stalls on Windows. Delete the downloaded installer and re-download it — 407 MB is a large file and a bad download is the most common cause. If re-download doesn’t fix it, try the smaller Printer Driver and Scanner Driver for Local Connection (42.36 MB) as a fallback for USB-connected setups.
- Wi-Fi install can’t find the printer. The MFC-L2750DW is 2.4 GHz only — if your PC sits on 5 GHz, Wi-Fi discovery fails. Switch the PC to the 2.4 GHz SSID temporarily, or use Ethernet for the install step.
- Printer not detected over USB. Switch to a different USB port — prefer a direct port on the computer over a hub. Swap the cable if you have a spare.
- Scanner not working on macOS Big Sur or later. Brother doesn’t publish a driver for this model on macOS 11 or newer. Use the built-in macOS Image Capture or Preview app for scanning — basic scan works through the scanner’s IPP class driver even without Brother’s software.
- Linux print queue stuck. If print jobs sit in the queue without printing, make sure both the printer driver (mfcl2750dwpdrv) and CUPS itself are installed and running. Run
sudo systemctl restart cupsto restart the print service. - Compatibility mode for legacy Windows. On Windows 7 or 8, if the installer fails to launch, right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for Windows 7”.
Known issues with the MFC-L2750DW
macOS Big Sur 11 and later — no Brother driver. Brother’s macOS support for this model stops at Catalina 10.15. Users on macOS Big Sur 11, Monterey 12, Ventura 13, Sonoma 14, Sequoia 15, and Tahoe 26 can print through AirPrint without any driver install, but Brother’s scanner driver, PC fax driver, and Brother iPrint&Scan utilities aren’t available on those versions. For basic scanning on newer macOS, use Image Capture or Preview, which detect the printer as a generic scanner.
Wi-Fi is 2.4 GHz only. The MFC-L2750DW’s 802.11 b/g/n radio doesn’t support 5 GHz. Modern routers that default to band steering can land the PC and printer on different bands, blocking discovery. Pick a Wi-Fi network that exposes the 2.4 GHz SSID separately, or use Ethernet for the install step.
Only two Windows driver packages. Brother ships just the Full Driver and the Printer+Scanner Local Connection packages for this model — no BR Script PostScript driver, no PCL universal driver, no EasySetup. For home and small office users this is fine; the Full Package covers every need. Fleet environments that want a universal Brother driver should look at newer MFC models in the lineup.
Toner starter cartridge has a short yield. The MFC-L2750DW ships with a starter TN-730 cartridge rated at around 700 pages — meaningfully less than the standard TN-730’s full yield. For heavy-use environments, buy a high-yield TN-760 or super high-yield TN-770 with the printer so you have a replacement ready when the starter runs out.
How to fully uninstall the MFC-L2750DW driver
On Windows:
- Open Settings > Printers & scanners and remove the Brother MFC-L2750DW entry.
- Open Settings > Apps > Installed apps and uninstall Brother iPrint&Scan and any other Brother component tied to the MFC-L2750DW.
- Open Brother Utilities from the Desktop or All Programs, click Tools, and run Uninstall. Repeat for every Brother model in the model selector.
- Reboot.
- For a clean wipe before a fresh install, use Driver Store Explorer (RAPR) to remove the Brother driver package from the Windows driver store.
On macOS:
- Open System Settings > Printers & Scanners and remove the MFC-L2750DW.
- Mount the original Full Software Package DMG and run the Uninstaller inside it, or remove Brother driver files manually from
/Library/Printers/Brother/. - Restart the Mac.
On Linux:
sudo dpkg -r mfcl2750dwpdrv brscan4 brmfcl2750dwpcfax # Debian/Ubuntu
sudo rpm -e mfcl2750dwpdrv brscan4 brmfcl2750dwpcfax # Fedora/RHEL
Brother MFC-L2750DW at a glance
| Spec | Value |
|---|---|
| Print technology | Monochrome laser |
| Functions | Print, scan, copy, fax |
| Print speed | Up to 36 pages per minute |
| Print resolution | 2400 x 600 dpi class |
| Duplex printing | Automatic two-sided |
| Scanner type | Flatbed + 50-sheet single-pass duplex ADF |
| Fax | 33.6 Kbps modem, 500-page memory, duplex faxing, PC fax send/receive |
| First page out time | 8.5 seconds (max, from Ready mode) |
| Display | 2.7-inch color touchscreen |
| Paper capacity | 250-sheet tray + 1-sheet manual feed |
| Connections | Hi-Speed USB 2.0, Wi-Fi 802.11 b/g/n (2.4 GHz only), Ethernet 10/100, Wi-Fi Direct, NFC touch-to-connect |
| Mobile printing | AirPrint, Mopria, Brother iPrint&Scan, Wi-Fi Direct, NFC tap-to-pair |
| Windows support | 11 (64-bit), 10, 8.1, 8, 7 (32-bit and 64-bit) |
| macOS support | Yosemite 10.10 through Catalina 10.15 (Big Sur 11 and later via AirPrint only) |
| Linux support | Yes — printer driver + scanner driver + PC FAX driver (deb and rpm) |
| Toner cartridge | TN-730 (standard), TN-760 (high-yield), TN-770 (super high-yield) |
| Drum unit | DR-730 (approx. 12,000 pages) |
Frequently Asked Questions
How do I download Brother printer drivers?
For the MFC-L2750DW, scroll up to the Driver files section on this page. The Full Driver and Software Package for Windows 11 and 10, 8.1, 8, 7 (407.14 MB) is Brother’s recommended download — it includes print, scan, PC fax, and Brother iPrint&Scan in one installer. For other Brother models, each printer has its own driver page with its own set of files because the scanner and fax feature sets differ model to model.
Is the Brother MFC-L2750DW printer compatible with Windows 11?
Yes. Brother publishes a Full Driver and Software Package specifically for Windows 11 (64-bit) — scroll up to the Driver files section. The same installer also covers Windows 10, 8.1, 8, and 7. The package installs the print driver, scanner driver, PC fax driver, Brother iPrint&Scan, and the Status Monitor in one run.
How do I connect my Brother MFC-L2750DW printer to my computer?
Three options. USB is the fastest to get working — plug a USB cable between the MFC-L2750DW and your computer during the Full Driver install and the installer handles the rest. For wireless, pair the printer to your Wi-Fi network through the 2.7-inch color touchscreen: tap Settings > Network > WLAN > Setup Wizard, pick your SSID, and enter the password. For wired, plug an Ethernet cable into the back of the printer and connect to your router or switch — the installer finds it by IP address. Android users can also use NFC touch-to-connect: hold an NFC-capable phone against the NFC logo on the printer control panel for one-tap pairing.
How can I download a free Brother printer driver?
All MFC-L2750DW driver files on this page are free. No signup, no payment, no account required. Scroll up to the Driver files section, click the download link next to the file that matches your operating system, and run the installer. Brother publishes every driver as a free download — any site charging for a Brother driver is reselling the same file Brother gives away.
Does the MFC-L2750DW driver work on macOS Sonoma or Sequoia?
No, Brother hasn’t published a driver for this model on macOS Big Sur 11 or newer (including Monterey 12, Ventura 13, Sonoma 14, Sequoia 15, and Tahoe 26). Brother’s driver support stops at macOS Catalina 10.15. On newer macOS, AirPrint handles basic printing without any driver install — add the printer in System Settings > Printers & Scanners. For scanning, use the built-in Image Capture or Preview apps, which detect the printer as a generic scanner without Brother-specific features.
Does the MFC-L2750DW scan both sides of a page in one pass?
Yes. The 50-sheet ADF supports single-pass duplex scanning — both sides of the page are captured in a single pass through the feeder. Set the scan job to duplex from the touchscreen or from the scanner software on your computer.
What toner does the MFC-L2750DW use?
The MFC-L2750DW uses three toner options: TN-730 (standard yield), TN-760 (high yield), and TN-770 (super high yield). The ship-in cartridge is a TN-730 starter rated at around 700 pages, which is less than the standard TN-730’s full yield. The drum unit is the DR-730, a separate consumable rated at approximately 12,000 pages.
