The Brother DCP-L2550DW is a compact monochrome laser multifunction printer — print, scan, and copy from a single unit, no fax (the DCP series skips the fax module by design). It prints at 36 pages a minute at 2400 x 600 dpi, scans through a 50-sheet ADF or on the flatbed, and ships with Wi-Fi, Ethernet, and Hi-Speed USB. Driver support covers Windows 11 down to Windows 7, macOS Yosemite 10.10 through Sonoma 14, and Linux through Brother-published deb and rpm packages.
This page has every current driver file for the DCP-L2550DW, plus the install flow I use for first-time setup, notes on the macOS driver landscape (multiple per-version packages), and a Linux section covering printing and scanning without the PC fax component that fax-equipped Brother MFCs require.
🖥️Supported Operating Systems
![]()
![]()
![]()
Which driver do I need for the DCP-L2550DW?
On Windows, the Full Driver and Software Package (407.14 MB) is the standard download — it installs the print driver, scanner driver, Brother iPrint&Scan, the Status Monitor, Brother Utilities, and all supporting software in one go. Covers Windows 11 through Windows 7. For a lighter install over USB, the Printer and Scanner Driver for Local Connection (42.36 MB) covers print + scan without the full suite.
On macOS, the right download depends on your macOS version. For macOS Big Sur 11 through Sonoma 14, only the ICA Scanner Driver is needed — printing goes through AirPrint, which works out of the box. For macOS Catalina 10.15, grab the Full Software Package (19.65 MB) or just the Printer Driver (7.11 MB). For macOS Mojave 10.14, there’s a dedicated Printer Driver package. For OS X Yosemite 10.10 through macOS High Sierra 10.13, the Full Software Package (19.37 MB) covers the range, or install the individual Printer Driver and TWAIN Scanner Driver packages separately.
On Linux, install the printer driver (deb or rpm) for printing. For scanning, add the scanner driver matching your architecture (32-bit or 64-bit). The DCP-L2550DW doesn’t need a PC FAX driver — the DCP series has no fax function.
Brother DCP-L2550DW Drivers for Windows
Brother DCP-L2550DW Drivers for macOS
ICA Scanner Driver
ICA Scanner Driver (macOS 12)
ICA Scanner Driver (macOS 11)
Full Software Package (macOS 10.15)
Printer Driver (macOS 10.15)
Full Software Package (OS X 10.10 to macOS 10.14)
Printer Driver (macOS 10.14)
Printer Driver (OS X 10.10 to macOS 10.13)
TWAIN Scanner Driver (OS X 10.10 to macOS 10.13)
Brother DCP-L2550DW Drivers for Linux
Printer Driver (deb package)
Printer Driver (rpm package)
Scanner Driver 64-bit (deb package)
Scanner Driver 64-bit (rpm package)
Scanner Driver 32-bit (deb package)
Scanner Driver 32-bit (rpm package)
Before you install
A few checks before running the installer save time later.
- Sign in to Windows or macOS with an account that has administrator rights.
- Plug the DCP-L2550DW’s power cable into a wall outlet but leave the printer off. The installer asks you to power it on at the right moment.
- Decide whether you’re setting up over USB, Wi-Fi, or Ethernet. The installer prompts for connection type early.
- Remove the orange shipping tape from the toner cartridge and pull out the internal packing material before powering on.
- Load paper in the 250-sheet tray.
- Close any old Brother utility that might be running from a previous Brother install — the new installer can’t replace a driver that’s in use.
Install the DCP-L2550DW driver step by step on Windows
Click the download link next to the Full Driver and Software Package in the Driver files section above and save the installer to your Downloads folder.
- Right-click the downloaded file and pick Run as administrator.
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks: USB, Wireless, or Wired Network.
- If you picked USB, connect the printer to your computer with a USB cable and power the printer on when the installer tells you to.
- If you picked Wireless, pair the printer to your Wi-Fi network through the printer’s 2-line LCD menu first — press Menu > Network > WLAN > Setup Wizard, pick your SSID with the up/down arrows, and enter the Wi-Fi password using the same buttons. The DCP-L2550DW is 2.4 GHz only, so make sure your router has a 2.4 GHz SSID the printer can see. WPS also works — press the WPS button on your router, then press the WiFi button on the printer within two minutes.
- If you picked Wired Network, connect an Ethernet cable between the printer and your router or switch. The installer finds the printer by IP address.
- Let the installer finish — the Full Package registers the print driver, scan driver, Brother iPrint&Scan, and the Status Monitor.
- When install completes, print a test page from the driver properties dialog and run a test scan to confirm both paths work.
Install the DCP-L2550DW driver on macOS
The right macOS install depends on your macOS version.
On macOS Big Sur 11 through macOS Sonoma 14: use AirPrint for printing (no driver install needed — the printer shows up automatically in System Settings > Printers & Scanners once it’s on the same network). For scanning, download the ICA Scanner Driver matching your macOS version from the Driver files section above.
On macOS Catalina 10.15: the Full Software Package (19.65 MB) handles print and scan in one install. For print-only, use the standalone Printer Driver (7.11 MB).
On OS X Yosemite 10.10 through macOS Mojave 10.14: the Full Software Package for 10.10 to 10.14 (19.37 MB) covers the whole range. If you need print only, the per-version Printer Driver packages apply (10.14 or 10.10 to 10.13). For scanning on 10.10 to 10.13, add the TWAIN Scanner Driver (2.28 MB) alongside.
Install the DCP-L2550DW driver on Linux
The DCP-L2550DW needs two separate Linux packages for full functionality — the printer driver for printing and the scanner driver for scanning. No PC FAX driver is needed because the DCP series has no fax function.
For printing on Debian, Ubuntu, or Mint:
sudo dpkg -i dcpl2550dwpdrv-*.deb
On Fedora, RHEL, or openSUSE:
sudo rpm -ihv --nodeps dcpl2550dwpdrv-*.rpm
Add the printer through your desktop’s print settings — Settings > Printers > Add Printer, pick the DCP-L2550DW from the list.
For scanning, install the scanner driver matching your architecture:
sudo dpkg -i brscan4-*.deb # 64-bit or 32-bit
# or
sudo rpm -ihv --nodeps brscan4-*.rpm
Test the scanner with scanimage -L — the DCP-L2550DW should appear in the SANE device list. Open Simple Scan or your preferred SANE app to run a test scan.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The DCP-L2550DW should appear in both printer and scanner lists.
- Print a test page from the driver properties dialog. First page out should be around 8.5 seconds from standby.
- Run a test scan from Windows Fax and Scan or macOS Preview — try both the flatbed and the 35-sheet ADF.
- Check the 2-line LCD — it should show the Ready message and, on a wireless connection, a signal-strength indicator.
- Press the Scan button on the printer to confirm scan-to-PC works directly from the printer control panel.
Print and scan from your phone or tablet
The DCP-L2550DW supports AirPrint for printing from iPhone and iPad on the same Wi-Fi network. For scanning on iOS, install Brother iPrint&Scan from the App Store — it handles scan-to-phone from the ADF or the flatbed.
For Android, install Brother iPrint&Scan from Google Play. The app picks up the DCP-L2550DW on the same Wi-Fi network for both printing and scanning. Mopria Print Service is another Android print option.
Wi-Fi Direct lets your phone connect directly to the printer without a router — enable it from the Network menu on the LCD.
If install fails
The checks below cover the common failure modes, in the order I’d try them.
- Full Driver Package installer stalls on Windows. Delete the downloaded installer and re-download it — 407 MB is a large file and a bad download is the most common failure. If re-download doesn’t fix it, try the smaller Printer and Scanner Driver for Local Connection (42.36 MB) as a fallback for USB-connected setups.
- Wi-Fi install can’t find the printer. The DCP-L2550DW is 2.4 GHz only — if your PC sits on 5 GHz, Wi-Fi discovery fails because the printer can’t see the PC’s band. Switch the PC to the 2.4 GHz SSID temporarily, or use Ethernet for the install step.
- Printer not detected over USB. Switch to a different USB port — prefer a direct port on the computer over a hub. Swap the cable if you have a spare.
- Scanner not showing up on macOS Big Sur or later. Modern macOS uses the ICA Scanner Driver — a separate download from the printing path (which goes through AirPrint). If you only added the printer via AirPrint, scanning won’t work until you install the matching ICA Scanner Driver.
- Linux print queue stuck. If print jobs sit in the queue without printing, make sure both the printer driver (dcpl2550dwpdrv) and CUPS itself are installed and running. Run
sudo systemctl restart cupsto restart the print service. - Compatibility mode cascade for legacy Windows. On Windows 7 or Vista, if the installer fails to launch, right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for Windows 7”.
Known issues with the DCP-L2550DW
macOS Sequoia 15 and Tahoe 26 — no updated driver. Brother hasn’t published updated drivers for macOS Sequoia 15 or Tahoe 26. The macOS Sonoma 14 ICA Scanner Driver may install on newer macOS, but scan behavior isn’t guaranteed. For printing on modern macOS, AirPrint handles basic print jobs without any driver install.
Wi-Fi is 2.4 GHz only. The DCP-L2550DW’s 802.11 b/g/n radio doesn’t support 5 GHz. Modern routers that default to band steering can land the PC and printer on different bands, blocking discovery. Pick a Wi-Fi network that exposes the 2.4 GHz SSID separately, or use Ethernet for the install step.
ADF is single-sided. The 50-sheet automatic document feeder scans one side at a time. To scan or copy a two-sided original through the ADF, flip the page manually and run a second pass, or use the flatbed for one side at a time.
No fax — this is a DCP, not an MFC. Brother’s DCP series skips the fax module by design. If you need fax, the MFC-L2750DW or newer MFC-L2820DW are the fax-equipped siblings in the same size class.
No touchscreen — 2-line LCD with physical buttons. Menu navigation runs through up/down arrow buttons rather than a touchscreen. For wireless setup through the printer menu alone, allow a minute or two to enter the Wi-Fi password one character at a time on the arrow buttons.
How to fully uninstall the DCP-L2550DW driver
On Windows:
- Open Settings > Printers & scanners and remove the Brother DCP-L2550DW entry.
- Open Settings > Apps > Installed apps and uninstall Brother iPrint&Scan and any other Brother component tied to the DCP-L2550DW.
- Open Brother Utilities from the Desktop or All Programs, click Tools, and run Uninstall. Repeat for every Brother model in the model selector.
- Reboot.
- For a clean wipe before a fresh install, use Driver Store Explorer (RAPR) to remove the Brother driver package from the Windows driver store.
On macOS:
- Open System Settings > Printers & Scanners and remove the DCP-L2550DW.
- Mount the original Full Software Package DMG and run the Uninstaller inside it, or remove Brother driver files manually from
/Library/Printers/Brother/. - Restart the Mac.
On Linux:
sudo dpkg -r dcpl2550dwpdrv brscan4 # Debian/Ubuntu
sudo rpm -e dcpl2550dwpdrv brscan4 # Fedora/RHEL
Brother DCP-L2550DW at a glance
| Spec | Value |
|---|---|
| Print technology | Monochrome laser |
| Functions | Print, scan, copy (no fax — DCP series) |
| Print speed | Up to 36 pages per minute |
| Print resolution | 2400 x 600 dpi |
| Duplex printing | Automatic two-sided |
| Scanner type | Flatbed + 50-sheet ADF (single-sided) |
| First page out time | 8.5 seconds (max, from Ready mode) |
| Display | 2-line backlit LCD (not touchscreen) |
| Paper capacity | 250-sheet tray + 1-sheet manual feed |
| Connections | Hi-Speed USB 2.0, Wi-Fi 802.11 b/g/n (2.4 GHz only), Ethernet 10/100, Wi-Fi Direct |
| Mobile printing | AirPrint, Mopria, Brother iPrint&Scan, Wi-Fi Direct |
| Windows support | 11 (64-bit), 10, 8.1, 8, 7 (32-bit and 64-bit) |
| macOS support | Yosemite 10.10 through Sonoma 14 |
| Linux support | Yes — printer driver + scanner driver (deb and rpm) |
| Toner cartridge | TN-730 (standard), TN-760 (high-yield) |
| Drum unit | DR-730 (approx. 12,000 pages) |
Frequently Asked Questions
Can I download the Brother DCP-L2550DW printer driver for free?
Yes. All DCP-L2550DW driver files on this page are free. No signup, no payment, no account required. Scroll up to the Driver files section, click the download link next to the file that matches your operating system, and run the installer. Brother publishes every driver for this printer as a free download — any site charging for a Brother driver is reselling the same file Brother gives away.
Does the Brother DCP-L2550DW printer have a driver for Mac?
Yes. Brother publishes macOS drivers for the DCP-L2550DW covering OS X Yosemite 10.10 through macOS Sonoma 14. For macOS Big Sur 11 through Sonoma 14, the download is an ICA Scanner Driver only — printing uses AirPrint, which works out of the box on modern macOS. For macOS Catalina 10.15 and earlier, Brother provides Full Software Packages and standalone driver packages. On macOS Sequoia 15 and Tahoe 26, Brother hasn’t published updated drivers; AirPrint still handles printing.
Where can I download Brother printer drivers?
For the DCP-L2550DW, the Driver files section above has every current driver. For other Brother printers, each model has its own dedicated driver page with its own set of files — Brother keeps separate builds for each model because scanner capability, fax feature, and connection options differ model to model.
Does the DCP-L2550DW have fax?
No. The DCP-L2550DW is Brother’s DCP series — print, scan, and copy only, no fax. The “DCP” prefix in Brother’s lineup signals a copier-oriented MFP without fax; “MFC” models like the MFC-L2750DW or the newer MFC-L2820DW are the fax-equipped siblings in the same size class.
Does the DCP-L2550DW driver work on Windows 11?
Yes. Brother publishes a Full Driver and Software Package for Windows 11 (64-bit) — scroll up to the Driver files section. The same installer covers Windows 10, 8.1, 8, and 7. The package installs the print driver, scan driver, Brother iPrint&Scan, and the Status Monitor in one run.
What toner does the DCP-L2550DW use?
The DCP-L2550DW uses the Brother TN-730 standard-yield toner or the TN-760 high-yield toner — same cartridge body, different page yields. The drum unit is the DR-730, a separate consumable rated at approximately 12,000 pages. Replace the toner when print quality fades or the LCD shows a low-toner message; replace the drum when the drum unit nearing replacement indicator triggers.
