The Brother HL-2270DW has been a reliable workhorse in home offices and small businesses since 2010. It’s a compact monochrome laser printer — print-only, no scanner or fax — with automatic duplex, wired Ethernet, and Wi-Fi all built in. Driver support is still available for Windows 11 down to XP (Brother ships two separate Full Driver packages for the newer and older OS eras), and for macOS back to Snow Leopard 10.6 via a per-version driver download.
This page has every download for the HL-2270DW, plus the install flow I use when I set one of these up on a modern machine. I’ve also added notes on the Windows 11 install issue that trips users up on the Full Driver Package, and the Mac situation on macOS Big Sur and newer where Brother’s dedicated driver no longer applies.
🖥️Supported Operating Systems
Which driver do I need for the HL-2270DW?
On Windows you have two Full Driver packages and four standalone Printer Driver packages — the right pick depends on your Windows version. The Full Driver and Software Package for Windows 11, 10, 8.1, and 8 (29.09 MB) is the recommended download for modern Windows. It installs the print driver, the Brother Utilities hub, and the Brother Status Monitor in one go.
For older Windows (7, Vista, XP), a separate Full Driver and Software Package (38.94 MB) covers those OS versions with the same scope.
If you want just the print driver without the full suite — for silent deployment, driver-only install, or if the Full Package won’t run on your system — the standalone Printer Driver packages are the right pick. Pick the one that matches your Windows version (11/10/8.1/8 or 7/Vista/XP) and your architecture (32-bit or 64-bit).
On macOS, Brother ships separate driver packages for each macOS version from Snow Leopard 10.6 through Catalina 10.15. Pick the one that matches your Mac’s version exactly — on macOS Catalina 10.15, grab the Printer Driver for macOS 10.15; on older macOS, the per-version packages cover you back to Leopard.
Brother HL-2270DW Drivers for Windows
Brother HL-2270DW Drivers for macOS
Printer Driver
Printer Driver (Mojave)
Printer Driver (High Sierra and Sierra)
Printer Driver (El Capitan)
Printer Driver (Yosemite)
CUPS Printer Driver (Mavericks)
CUPS Printer Driver (Snow Leopard to Mountain Lion)
CUPS Printer Driver (Leopard)
Before you install
A few things to line up so the install runs clean the first time.
- Sign in with a Windows account that has administrator rights. The installer prompts for elevation and will stop if it can’t get it.
- On a Mac, make sure your account can approve a system extension prompt (admin password handy).
- Connect the power cable and plug the HL-2270DW into a wall outlet. Don’t power it on yet. The installer will tell you when to turn it on.
- Decide whether you’re installing over USB, Wi-Fi, or Ethernet. All three work, and the installer asks early.
- Close any open print app and any previous Brother utility. The installer can’t replace a driver that’s in use.
- Pull the orange tape off the toner cartridge and remove the shipping locks before you start.
Install the HL-2270DW driver step by step
Click the download link next to the Full Driver and Software Package in the Driver files section above (the Windows 11/10/8.1/8 version for modern Windows, or the Windows 7/Vista/XP version for older systems) and save the installer to your Downloads folder.
Walk through the installer:
- Right-click the downloaded file and pick Run as administrator (Windows) or double-click the DMG and open the package (Mac).
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks. Choose USB, Wireless, or Wired Network.
- If you picked USB, connect the printer to your Mac or PC with a USB cable and turn it on when the installer tells you to.
- If you picked Wireless, make sure the printer is already connected to your Wi-Fi network — the HL-2270DW runs on 2.4 GHz only, so check that your PC sits on the same band if your router supports 5 GHz as well. The Wireless Setup Wizard on the printer walks you through SSID selection using the 1-line LCD, or you can use the WPS button on your router.
- If you picked Wired Network, connect an Ethernet cable between the printer and your router or switch. The installer finds the printer by IP address.
- Let the installer finish. The Full Driver Package extracts quickly (Brother’s package is smaller than most multifunction setups).
- When install completes, print a test page from the driver properties dialog.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The Brother HL-2270DW should appear in the list.
- Print a test page from the printer properties dialog. If the page comes out blank, check that the toner cartridge is seated correctly and the orange shipping tape is fully removed.
- Check the four LED indicators on top of the printer (Toner, Drum, Paper, Ready). The Ready LED should be solid green. If the Toner or Drum LED is lit or blinking, the printer is signaling a consumables issue.
- Look at the 1-line LCD for the printer’s current status message — “Ready” or the current paper size confirms it’s online.
Print from your phone or tablet
The HL-2270DW supports AirPrint on iPhone and iPad for direct printing from Photos, Mail, Safari, or any iOS app with a Share sheet. Make sure the printer and your iPhone are on the same Wi-Fi network — the HL-2270DW runs on 2.4 GHz only, so if your phone sits on 5 GHz, you’ll need to switch it temporarily.
For Android, Brother iPrint&Scan handles printing. Download it from Google Play, point it at your HL-2270DW on the same Wi-Fi network, and it picks the printer up. Mopria Print Service is another option for Android devices that support it.
If install fails
Windows 11 is where most install trouble lands on this printer. The workarounds below cover the common failure modes, in the order I’d try them.
- Full Driver Package installer fails to launch or hangs on Windows 11. Users on the Microsoft Q&A thread report errors like “The application was unable to start correctly” when the Brother installer refuses to run. The resolved fix is a full clean-uninstall sequence. Uninstall any existing Brother iPrint&Scan from Apps > Installed apps. Open Brother Utilities from the Desktop or All Programs, click Tools on the left menu, choose Uninstall, and repeat for every model listed in the model selector. Reboot. Then re-download the Full Driver Package and run it from a local folder.
- Install under a new user account. Users on the same Microsoft Q&A thread report success installing Brother software under a fresh Windows user account. Create a new user on the computer, log in as that user, install the Full Driver Package, and choose “install for all users” during setup. You can delete the temporary user profile afterward.
- Use the standalone Printer Driver instead of the Full Package. If the Full Driver Package won’t install, the smaller standalone Printer Driver (5.23 MB for 64-bit, 5.37 MB for 32-bit) often installs cleanly where the Full Package fails. You lose Brother Utilities and the Status Monitor with this route, but basic printing works.
- Add the printer via network discovery. Connect the HL-2270DW to your Wi-Fi network through the printer’s own menu, then open Windows Settings > Bluetooth & devices > Printers & scanners, click Add device, and Windows discovers the printer and installs a basic driver automatically.
- Compatibility mode cascade. Right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for”. Try Windows 8 first, then Windows 7, then Windows Vista (Service Pack 2) as a last resort. Save after each change and run the installer as administrator each time.
- Printer not detected over USB on Windows 11. Brother has publicly confirmed USB connection issues on Windows 11 for several of its printers. Try a different USB port, prefer a direct port on the computer over a hub, and swap the cable if you have a spare.
- Wireless install can’t find the printer. Make sure the printer and your PC are on the same Wi-Fi network. The HL-2270DW runs on 2.4 GHz only, so if your PC sits on 5 GHz, connect your PC to the 2.4 GHz SSID temporarily or use Ethernet for the install.
Known issues with the HL-2270DW
Full Driver Package install failures on Windows 11. Users on the Microsoft Q&A thread report the Brother Full Driver installer sometimes fails to launch at all on Windows 11, or fails with a startup error. The clean-uninstall sequence and the new-user-account workaround are the two user-verified paths through. The standalone Printer Driver package also works as a fallback for basic printing without Brother’s utilities.
Brother-confirmed USB connection issues on Windows 11. Brother has publicly confirmed that some of its printers run into USB connectivity problems on Windows 11. If USB install fails, the fallback is to add the printer over Wi-Fi or Ethernet instead.
macOS support ends at Catalina 10.15. Brother’s dedicated macOS driver officially covers up to macOS Catalina 10.15. On macOS Big Sur 11 and later, the HL-2270DW relies on AirPrint for basic printing — the print function works, but you lose Brother’s Status Monitor and model-specific print settings.
Microsoft legacy printer framework phase-out. Microsoft is phasing out the printer driver frameworks that older models like the HL-2270DW rely on, so previously working drivers may stop functioning after a Windows 11 feature update. If Brother’s driver fails after an update, add the printer using Windows’ built-in generic IPP class driver instead: Settings > Printers & scanners > Add device > “The printer that I want isn’t listed” > Add a printer using a TCP/IP address, then pick IPP as the protocol. Basic printing works, though you lose Brother’s utilities.
Wireless on 2.4 GHz only. The HL-2270DW’s 802.11 b/g/n radio doesn’t support 5 GHz. On modern routers that default to band steering, the PC and printer can end up on different bands, which blocks discovery. Pick a Wi-Fi network that exposes the 2.4 GHz SSID separately, or disable band steering for setup.
How to fully uninstall the HL-2270DW driver
On Windows:
- Open Settings > Printers & scanners and remove the Brother HL-2270DW entry.
- Open Brother Utilities from the Desktop or All Programs, click Tools on the left menu, and choose Uninstall. Repeat for every Brother model listed in the model selector.
- Open Settings > Apps > Installed apps and uninstall any remaining Brother components tied to the HL-2270DW.
- Reboot.
- For a true clean wipe before a fresh install, use Driver Store Explorer (RAPR) to remove the Brother driver package from the Windows driver store.
On macOS:
- Open System Settings > Printers & Scanners and remove the HL-2270DW.
- Mount the original Printer Driver DMG you used to install and run the Uninstaller inside it if present. Brother driver files on macOS live under
/Library/Printers/Brother/and can be removed manually. - Restart the Mac.
Brother HL-2270DW at a glance
| Spec | Value |
|---|---|
| Release year | 2010 |
| Print technology | Monochrome laser |
| Functions | Print only (no scan, copy, or fax) |
| Print speed | Up to 27 pages per minute |
| Max resolution | 2400 x 600 dpi |
| Duplex printing | Automatic two-sided |
| Display | 1-line LCD + 4 LED indicators (Toner, Drum, Paper, Ready) |
| Paper capacity | 250-sheet tray + 1-sheet multipurpose |
| Connections | Hi-Speed USB 2.0, Wi-Fi 802.11 b/g/n (2.4 GHz), Ethernet 10/100 |
| Mobile printing | AirPrint, Brother iPrint&Scan, Mopria |
| Windows support | 11, 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit) |
| macOS support | Mac OS X 10.5 Leopard through macOS Catalina 10.15 (Big Sur+ via AirPrint) |
| Linux support | Yes — model-specific brother-hl2270dw package (.deb and .rpm from Brother’s Linux downloads) |
| Toner cartridge | TN420 (standard), TN450 (high-yield) |
| Drum unit | DR420 (approx. 12,000 pages) |
Frequently Asked Questions
Where can I download the Brother HL-2270DW driver software?
Scroll up to the Driver files section on this page. The Full Driver and Software Package for Windows 11, 10, 8.1, 8 (29.09 MB) is Brother’s recommended download for modern Windows. For older Windows (7, Vista, XP), grab the Legacy Full Driver Package (38.94 MB). The macOS driver comes as a separate download per macOS version — pick the one that matches your Mac. All downloads on this page are the current Brother-released files, with no signup walls or bundled toolbars.
Does the Brother HL-2270DW driver work on Windows 11?
Yes. Brother publishes a Full Driver and Software Package for Windows 11. The install isn’t always clean, and users on the Microsoft Q&A thread report the installer sometimes fails to launch on Windows 11. If that happens, try the clean-uninstall sequence or install under a new Windows user account as described in the “If install fails” section above. The smaller standalone Printer Driver (5.23 MB for 64-bit) is a reliable fallback for basic printing.
Does the HL-2270DW driver work on Mac?
Partially. Brother’s dedicated macOS driver officially covers Mac OS X 10.5 Leopard through macOS Catalina 10.15. Grab the per-version driver from the Driver files section above — on Catalina, pick the Printer Driver for macOS 10.15. On macOS Big Sur 11 and later, Brother doesn’t publish a native driver, but AirPrint handles basic printing — the printer shows up in Printers & Scanners after you add it over the network.
How do I set up the HL-2270DW on my wireless network?
Three options. Run the Full Driver installer and pick Wireless during the connection step — the installer walks you through the printer’s Wireless Setup Wizard, which uses the 1-line LCD on the printer to pick your SSID. Second option: use WPS — press the WPS button on your router, then press the Go button on the printer within 2 minutes to pair automatically. Third option: Brother iPrint&Scan mobile app can walk your phone through setup if you’ve already installed it. The HL-2270DW runs on 2.4 GHz Wi-Fi only, so make sure your network has a 2.4 GHz SSID the printer can see.
Is the Brother HL-2270DW driver free to download?
Yes. All HL-2270DW driver files are free. No signup, no payment, no account required.
What toner and drum does the HL-2270DW use?
The HL-2270DW uses the Brother TN420 standard-yield toner or the TN450 high-yield toner — same cartridge body, different page yield. The drum unit is the DR420, which is a separate consumable rated at approximately 12,000 pages. Replace the toner when print quality fades or the Toner LED lights up; replace the drum when the Drum LED signals it, usually after several toner cycles.
Can I use the HL-2270DW on Linux?
Yes. Brother publishes a model-specific driver for the HL-2270DW — the brother-hl2270dw package. Download the .deb and .rpm packages from Brother’s Linux support page, or install from your distribution’s community repository (AUR on Arch, for example). Install the driver package through your package manager, then add the printer through your distribution’s print settings.
