The Epson EcoTank ET-2850 is a compact home all-in-one — print, scan, and copy from one unit, with Epson’s refillable ink tank system instead of cartridges. It’s one of Epson’s current compact EcoTanks for home use, and the driver support is in good shape: a current Combo Package covers Windows 11 down to Vista, and a single macOS Combo Package stretches from Mac OS X Lion 10.7 all the way through macOS Sequoia 15.
This page has every download for the ET-2850, plus the install flow I use when I set one of these up. I’ve also added notes on the EcoTank first-fill procedure (it takes about 15 minutes and there’s no skipping it) and the Wi-Fi 2.4 GHz-only limitation that trips people up on modern dual-band routers.
🖥️Supported Operating Systems
![]()
![]()
Which driver do I need for the EcoTank ET-2850?
On Windows you have a few options, and the right pick depends on what you want from the printer. The Drivers and Utilities Combo Package is the small recommended installer (11.35 MB). It fetches and installs the right components for your Windows version — print driver, scanner driver, Epson Scan 2, and the Epson status utility — in one go. For most people this is the right pick.
If you want the standalone print driver only, the Printer Driver packages (64-bit and 32-bit variants) install just the print component without the scanner driver or utilities. For scanning, a separate Scanner Driver and Epson Scan 2 package covers just that function.
The Remote Print Driver is Epson’s cloud print option — it lets you send print jobs to the ET-2850 over the internet by email or through the Epson Connect service. Grab it only if remote printing fits your workflow.
On macOS, Epson ships the same four components as separate packages: the small Combo Package Installer that fetches everything, plus standalone Printer Driver, Scanner Driver, and Remote Print Driver packages if you want to install only one piece.
Epson EcoTank ET-2850 Drivers for Windows
Epson EcoTank ET-2850 Drivers for macOS
Before you install
A few things to line up so the install runs clean the first time.
- Sign in with a Windows account that has administrator rights. The installer prompts for elevation and will stop if it can’t get it.
- On a Mac, make sure your account can approve a system extension prompt (admin password handy).
- Unbox the ET-2850, remove all orange protective tape, and set it in its final location before you start the install. The initial ink fill needs the printer level and still.
- Have the four Epson 522 ink bottles ready (black, cyan, magenta, yellow). Fresh EcoTanks ship with the first set of bottles in the box.
- Connect the power cable. Don’t start the ink fill or the driver install until you’ve decided on USB or Wi-Fi.
- Decide whether you’re installing over USB or Wi-Fi. The ET-2850 has no Ethernet, so those are your two options.
- Close any open print app and any previous Epson utility. The installer can’t replace a driver that’s in use.
Install the EcoTank ET-2850 driver step by step
The EcoTank setup has two parts: the initial ink fill on the printer itself (one-time, about 15 minutes), and the driver install on your computer. Do the ink fill first — the printer won’t accept print jobs until it’s complete.
Ink fill (one-time, on the printer):
- Power on the ET-2850. The color LCD walks you through setup prompts — language, region, time zone.
- When the display asks, open the ink tank cover, remove the cap from the first bottle (black), and snap it into the matching tank port. Epson’s bottle design keys to the correct color, so black won’t fit into the cyan tank even if you try.
- Squeeze the bottle gently; the ink flows on its own until the tank fills. Don’t rush it.
- Repeat for cyan, magenta, and yellow bottles. Close the tank cover when all four are filled.
- The printer runs an internal ink distribution cycle — about 15 minutes. The color LCD shows a progress indicator. Don’t power off or disconnect during this time.
Driver install (on your computer):
- Click the download link next to the Combo Package in the Driver files section above and save the installer to your Downloads folder.
- Right-click the downloaded file and pick Run as administrator (Windows) or double-click the DMG and open the package (Mac).
- Accept the license agreement when the first screen asks.
- Pick your connection method when the installer asks. Choose USB cable or Wireless.
- If you picked USB, connect the printer to your Mac or PC with a USB cable.
- If you picked wireless, make sure the printer and your computer are on the same Wi-Fi network — the ET-2850 runs on 2.4 GHz only, so if your router is pushing your PC to 5 GHz, temporarily switch to the 2.4 GHz SSID for setup.
- Let the installer finish and run the test page it offers.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The Epson EcoTank ET-2850 should appear in the list.
- Print a test page from the printer properties dialog. If the color looks off, run a nozzle check from the Epson utility — the first prints after a fresh fill can show streaks that settle after a cleaning cycle.
- Open Epson Scan 2 and run a test scan from the flatbed. The scanner should appear and complete a scan to PDF or JPEG without errors.
- Check the 1.44-inch color LCD on the printer. “Ready” or the home screen confirms the printer is online.
Print and scan from your phone or tablet
The ET-2850 supports AirPrint on iPhone and iPad for direct printing from Photos, Mail, Safari, or any iOS app with a Share sheet. Make sure the ET-2850 and your iPhone are on the same Wi-Fi network — both devices need to be on 2.4 GHz for the printer to show up.
For Android, the Epson Smart Panel app handles both printing and scanning. Download it from Google Play, point it at your ET-2850 on the same Wi-Fi network, and it picks the printer up. Mopria Print Service is a third option for Android devices that support it.
If you installed the Remote Print Driver on your desktop, you can also send print jobs to the ET-2850 over the internet by email through the Epson Connect service — useful if you print from outside the house or want to forward documents to the printer remotely.
If install fails
Here are the common failure modes and the fixes that resolve them, in the order I’d try them.
- Installer closes silently or hangs on Windows 11. Run the installer through Windows compatibility mode. Right-click the installer, open Properties, go to the Compatibility tab, and check “Run this program in compatibility mode for”. Try Windows 10 first. If it still fails, step down to Windows 8 and Windows 7. Save after each change and run the installer as administrator each time.
- Printer not detected over USB. Try a different USB port, prefer a direct port on the computer over a hub, and swap the cable if you have a spare. The ET-2850’s USB port is on the back — confirm it’s seated fully. Check that the home screen appears on the color LCD before clicking Next in the installer.
- Wireless install can’t find the printer. Make sure your PC and the printer are on the same Wi-Fi network and the same 2.4 GHz band. The ET-2850 doesn’t support 5 GHz, so if your router has band steering on and parks your PC on 5 GHz, temporarily disable band steering or connect your PC to the 2.4 GHz SSID for setup.
- Printer stuck in “initializing” after ink fill. The first-fill cycle takes about 15 minutes — wait for it to complete fully before you start the driver install. If more than 20 minutes have passed and the LCD still shows an initialization message, power off the printer, wait 30 seconds, and power it back on to retry the cycle.
- Previous Epson driver stuck. Open Settings > Printers & scanners, remove any older ET-2850 or Epson entries, then open Apps > Installed apps and uninstall Epson Scan 2 and any Epson utility tied to the ET-2850. Reboot, then rerun the installer.
- Blank pages after a refill. After topping up ink bottles, the print head may need a cleaning cycle. Run Head Cleaning from the Epson utility on your PC or from the printer’s maintenance menu on the color LCD. Two cleaning cycles usually clear it; run a nozzle check between cycles to confirm.
If the scanner doesn’t work after install
- Scanner missing from Epson Scan 2. Open Epson Scan 2, click Select Scanner at the top, and pick the ET-2850 explicitly. The app sometimes defaults to an older Epson model if you have one installed previously.
- Windows Scan or Image Capture doesn’t see the scanner. Confirm the scanner driver installed by opening Device Manager (Windows) and looking under Imaging Devices for the ET-2850 entry. If it’s missing, install the standalone Scanner Driver and Epson Scan 2 Utility package separately.
- Scan button on the printer doesn’t trigger a scan. The ET-2850’s Scan button needs a destination configured on your PC. Open Epson Scan 2 on your computer, set the destination type, and save the profile.
Known issues with the EcoTank ET-2850
First-fill ink distribution takes about 15 minutes. New EcoTank printers need a one-time internal priming cycle after the tanks are filled for the first time. The color LCD shows a progress indicator — don’t power off or disconnect the printer during this cycle. This is normal and only happens once.
Wi-Fi is 2.4 GHz only. The ET-2850’s 802.11 b/g/n radio doesn’t support 5 GHz. On modern dual-band routers, the PC and printer can end up on different bands, which blocks discovery. Pick a Wi-Fi network that exposes the 2.4 GHz SSID separately, or disable band steering for setup.
No Ethernet port. The ET-2850 has USB and Wi-Fi only. If you need a wired network connection for a shared office printer, the ET-2850 isn’t the right pick — Epson’s business WorkForce line has Ethernet, as do larger EcoTank models like the ET-4850.
No automatic duplex printing. The ET-2850 doesn’t have an automatic two-sided print feature. To print on both sides, flip the paper manually between passes.
No ADF (automatic document feeder). The scanner is flatbed only. For multi-page scanning or copying, you feed pages one at a time by hand. The ET-4850 is the ADF-equipped sibling in the compact EcoTank line.
Blank pages after a refill. After topping up ink bottles, the print head may need a cleaning cycle to re-prime. Run Head Cleaning from the Epson utility, then a nozzle check to confirm. This is standard EcoTank maintenance, not a driver issue.
How to fully uninstall the EcoTank ET-2850 driver
On Windows:
- Open Settings > Printers & scanners and remove the Epson EcoTank ET-2850 entry.
- Open Settings > Apps > Installed apps and uninstall Epson Printer Driver, Epson Scan 2, Epson Software Updater, and any other Epson component tied to the ET-2850.
- Reboot.
- For a true clean wipe before a fresh install, open Driver Store Explorer (RAPR), filter by Epson, and remove the ET-2850 driver package from the Windows driver store.
On macOS:
- Open System Settings > Printers & Scanners and remove the ET-2850.
- Mount the original Combo Package DMG you used to install and run the Uninstaller inside it if present. Epson driver files on macOS live under
/Library/Printers/EPSON/and/Library/Image Capture/Devices/and can be removed manually. - Restart the Mac.
Epson EcoTank ET-2850 at a glance
| Spec | Value |
|---|---|
| Release year | 2020 |
| Print technology | Inkjet with refillable ink tank (EcoTank) |
| Functions | Print, scan, copy (no fax, no ADF) |
| Print speed | Up to 10 pages per minute black, 5 pages per minute color |
| Max print resolution | 5760 x 1440 optimized dpi |
| Scanner | Flatbed, 1200 x 2400 dpi |
| Duplex printing | Manual only |
| Display | 1.44-inch color LCD |
| Connections | Hi-Speed USB 2.0, Wi-Fi 802.11 b/g/n (2.4 GHz). No Ethernet. |
| Mobile printing | AirPrint, Epson Smart Panel, Mopria, Epson Remote Print |
| Windows support | 11, 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit per variant) |
| macOS support | Mac OS X 10.6 Snow Leopard through macOS Sequoia 15 |
| Linux support | Yes, via epson-inkjet-printer-escpr package (not escpr2) |
| Ink bottles | Epson 522 series — black, cyan, magenta, yellow (4 bottles) |
| Weight | About 3.9 kg (8.6 lb) |
| Dimensions | 375 x 347 x 179 mm (14.8 x 13.7 x 7.0 inches) |
Frequently Asked Questions
Where can I download the Epson EcoTank ET-2850 driver software for Windows 11?
Scroll up to the Driver files section on this page. The Drivers and Utilities Combo Package Installer (11.35 MB) is Epson’s recommended Windows download — it fetches and installs the right print driver, scanner driver, Epson Scan 2, and the Epson status utility in one go. Works on Windows 11 and every earlier version through Vista. All downloads on this page are the current Epson-released files.
How do I connect my Epson ET-2850 to my laptop?
Two options. USB: connect the cable between the printer and your laptop when the Combo Package installer prompts you. Wi-Fi: pick Wireless during the installer, and the ET-2850 connects over 2.4 GHz Wi-Fi. The printer has no Ethernet port, so USB and Wi-Fi are your only choices. Make sure the first-fill ink procedure is complete before you start the driver install — the printer won’t accept print jobs until it finishes.
Is the ET-2850 driver free to download?
Yes. All ET-2850 driver files are free. No signup, no payment, no account required.
Does the ET-2850 driver work on macOS Sequoia 15?
Yes. Grab the Drivers and Utilities Combo Package Installer for macOS (17.2 MB) from the Driver files section above. The same package covers macOS Sequoia 15 and every earlier macOS release down to Mac OS X Lion 10.7.
How long does the first-fill ink procedure take on the ET-2850?
About 15 minutes. After you fill the four Epson 522 bottles into the matching tanks, the printer runs an internal ink distribution cycle that primes the print head. The 1.44-inch color LCD shows a progress indicator. Don’t power off or disconnect the printer during the cycle — it only happens once, and interrupting it can leave the print head partially primed.
My ET-2850 is printing blank pages after a refill. What should I do?
After topping up ink bottles, the print head sometimes needs a cleaning cycle to re-prime. Open the Epson utility on your PC (or the maintenance menu on the printer’s color LCD) and run Head Cleaning. Follow it with a Nozzle Check to confirm the pattern prints cleanly. Two cleaning cycles usually clear it. If blank pages persist after three cleaning attempts, give the printer a few hours of idle time before trying again — aggressive back-to-back cleanings can empty the tanks faster than they fix the issue.
Can I use the ET-2850 on Linux?
Yes. Install Epson’s epson-inkjet-printer-escpr package through your distribution’s package manager — on Debian and Ubuntu, sudo apt install printer-driver-escpr; on Arch via AUR, yay -S epson-inkjet-printer-escpr. Note that community reports confirm the ET-2850 needs the escpr driver, not escpr2. For scanning on Linux, install epsonscan2 plus the non-free plugin.
