The Brother MFC-J1010DW driver installs cleanly on Windows 11 through 7 and on macOS Mojave through Sonoma, and on current Linux distributions through the Brother package set below. This is a color inkjet multifunction with a 20-sheet ADF, a 1.8-inch color display, automatic duplex print, and fax, connected over USB or Wi-Fi (no Ethernet on this model). Brother marks the hardware as discontinued, but every driver on this page is still Brother’s official release and installs cleanly on current systems.
Grab the Full Driver and Software Package from the Windows section below, run it as administrator, pick your connection type (USB or wireless), and follow the on-screen prompts. The installer handles the color print driver, the scanner driver, Brother Mobile Connect setup, PC-FAX, and the wireless setup wizard in one install. On macOS, a single Full Software Package covers Mojave 10.14 through Sonoma 14.
Below: the two Windows downloads (Full Package and USB-only slim install), the single macOS package that covers the full Mojave-to-Sonoma range, the Linux packages (printer driver, scanner driver per architecture, and PC FAX separately), how to configure wireless from the 1.8-inch display, the LC401 vs LC401XL ink question, and what to do when the MFC-J1010DW won’t join your Wi-Fi.
🖥️Supported Operating Systems
Which driver do I need for the MFC-J1010DW?
The MFC-J1010DW has one Full Windows download plus a slimmer USB-only variant, a single macOS package that covers a wide macOS range, and three separate Linux packages for printer, scanner, and PC FAX. The Windows Full Driver and Software Package covers the color print driver, the TWAIN and WIA scanner drivers, Brother Mobile Connect setup, PC-FAX, and the wireless setup wizard. The Printer and Scanner Driver for USB is a smaller install for USB-connected setups without wireless configuration or PC-FAX.
I recommend the Full Driver and Software Package for most installs because the wireless setup wizard and PC-FAX client are included in one install. Pick the USB-only variant if you connect over USB and want a smaller footprint. On macOS, there’s only one Full Software Package and it covers Mojave through Sonoma. On Linux, you’ll typically install the printer driver plus the matching scanner driver for your architecture (32-bit or 64-bit), plus the PC FAX driver if you want to send faxes from your Linux machine.
Brother MFC-J1010DW Drivers for Windows
Brother MFC-J1010DW Drivers for macOS
Full Software Package (macOS 10.14 to 14 Sonoma)
Brother MFC-J1010DW Drivers for Linux
Printer Driver (deb)
Printer Driver (rpm)
Scanner Driver 64-bit (deb)
Scanner Driver 32-bit (deb)
Scanner Driver 64-bit (rpm)
Scanner Driver 32-bit (rpm)
PC FAX Driver (deb)
PC FAX Driver (rpm)
Before you install
- Sign in to Windows or macOS with an administrator account.
- Have the printer powered on. If you’re doing a USB install, don’t plug in the cable yet (the installer asks for it at the right step).
- Close other apps, especially office suites and PDF viewers, so nothing holds a print handle while the installer runs.
- Have your Wi-Fi network name and password ready. The MFC-J1010DW has no Ethernet port, so you’re installing over USB or wireless. Those are the only two options.
- The MFC-J1010DW supports Wireless 802.11 b/g/n, which means 2.4 GHz networks. It does not see 5 GHz SSIDs.
- For a fax line setup, have the phone line cable connected to the LINE jack on the back before running through fax configuration on the control panel.
- Install the starter ink cartridges that came with the printer before running the driver install. The printer needs ink loaded to complete its initial calibration, and the installer test print won’t work without ink.
Install the MFC-J1010DW driver step by step
Pick the download next to the Full Driver and Software Package in the Windows section above. Your browser saves the installer to your Downloads folder.
- Right-click the downloaded .exe and pick Run as administrator.
- Accept the license agreement when prompted.
- The installer asks for the connection type. Pick Local Connection (USB) or Wireless Network Connection. There’s no Ethernet option on the MFC-J1010DW.
- For USB: plug the Hi-Speed USB 2.0 cable into the printer and the computer when the installer prompts, and wait for the setup wizard to detect the printer.
- For Wireless: follow the on-screen prompts, pick your 2.4 GHz Wi-Fi network from the scan list, enter the password, and wait for the printer to confirm wireless connection on the 1.8-inch color display.
- Pick the Standard Install option for the full MFP stack (print driver, scanner, Brother Mobile Connect, PC-FAX), or a minimal install if you only need print and scan.
- When the installer offers to set the MFC-J1010DW as default printer, leave that checked if it’s your main device.
- Run a test print when the installer finishes. If you installed PC-FAX, also send a test fax from the Brother PC-FAX client once the fax line is configured.
Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.
On macOS: open the .dmg file you downloaded, run the installer inside, follow the connection-type prompts, and add the printer through System Settings > Printers & Scanners when the installer asks. The single Full Software Package covers macOS 10.14 Mojave through 14 Sonoma, so there’s one download for all supported macOS versions.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The MFC-J1010DW should be listed with status Ready, not Offline.
- Print a color test page from the device’s properties. A color patch sheet confirms the color print path works and the ink cartridges are seated correctly.
- Open Brother Mobile Connect on the desktop or the scanner tool, pick the MFC-J1010DW, and run a flatbed or ADF scan. The scanner should appear as a separate device from the printer.
- Check Device Manager (Windows) for any yellow warning icons under Printers or Imaging devices. A clean tree means the drivers signed and loaded without issue.
- If you installed PC-FAX, open the Brother PC-FAX client and confirm the device appears. You can send a test fax once the fax line and ring settings are configured.
Print from your phone or Chromebook
The MFC-J1010DW supports AirPrint (iOS and iPadOS), Mopria Print Service (Android), Brother Mobile Connect (iOS and Android), and Wi-Fi Direct for peer-to-peer printing without a router. None of these mobile paths require the desktop driver.
For iPhone or iPad, open any app with a share sheet, pick Print, and the MFC-J1010DW appears in the AirPrint list once it’s on the same Wi-Fi as your phone. For Android, install Mopria Print Service from Play Store if your version of Android doesn’t include it, or install Brother Mobile Connect for Brother-specific features like scan-to-phone and ink status. On a Chromebook, add the printer through chrome://settings/printing. ChromeOS discovers it via mDNS and prints through its built-in IPP stack.
Brother Mobile Connect replaced the older Brother iPrint and Scan app for this generation of Brother printers, so if you’re used to iPrint and Scan on an older Brother model, the MFC-J1010DW uses the newer Mobile Connect app from the App Store or Play Store.
Set up wireless on the MFC-J1010DW
The MFC-J1010DW has a 1.8-inch color display (not a touchscreen), so wireless setup uses the buttons on the control panel. Press Menu, use the arrow keys to find Network, then WLAN, then Setup Wizard. The printer scans for networks, lists SSIDs on the display, and prompts for the Wi-Fi password through the keypad (press each number key to cycle through letters, similar to older phone keypads). Alternative: WPS Button Push if your router supports WPS. Pick WPS from the same WLAN menu and press the WPS button on the router within two minutes.
If the MFC-J1010DW does not see your network name, check that your router is broadcasting 2.4 GHz (not 5 GHz only). The printer supports Wireless 802.11 b/g/n, which are all 2.4 GHz standards. Because there’s no Ethernet port on the MFC-J1010DW, wireless is the only network option. If your Wi-Fi setup is problematic, Wi-Fi Direct lets a specific phone or laptop pair directly with the printer without a router.
If install fails
- Previous Brother driver stuck in Windows. Open Settings > Printers & scanners, remove any older MFC-J1010DW entries, uninstall “Brother MFC-J1010DW” from Programs and Features, reboot, and rerun the installer. Half-finished state from an older install blocks the new one.
- USB connection not detected. Try a different USB port, prefer a direct port on the computer over a USB hub, swap the cable, and confirm the printer’s display shows Ready before clicking Next. The MFC-J1010DW uses Hi-Speed USB 2.0.
- Wireless install can’t find the printer. Confirm your router is broadcasting 2.4 GHz (not 5 GHz only), that both computer and printer are on the same network, and that client isolation isn’t on in the router settings. Many mesh systems default to merged SSIDs that steer new devices to 5 GHz. The MFC-J1010DW will never see those.
- Driver installs but printer shows Offline. Open Settings > Printers & scanners, open the MFC-J1010DW entry, and uncheck Use printer offline. If that’s already off, restart the Print Spooler service.
- Installer fails on Windows 11 with no clear error. Right-click the installer, open Properties > Compatibility, and check Run this program in compatibility mode for. Try Windows 8 first since the driver officially covers Windows 10. If that doesn’t take, step down to Windows 7. Save after each change and run the installer as administrator.
- “Driver unavailable” or Unknown Device in Device Manager. Remove the printer from Printers & scanners, open Device Manager, right-click the Unknown Device under Other devices, pick Update driver > Browse my computer, and point it at the extracted installer folder.
- Admin rights error mid-install. Close the installer, right-click the .exe again, pick Run as administrator, and confirm the UAC prompt.
- Printer powers on but won’t finish initial calibration. The MFC-J1010DW needs ink cartridges loaded before it completes its startup calibration. Install the starter ink cartridges that came in the box, wait for the calibration to finish on the display, and then run the driver installer.
Manual install via INF file
If the bundled installer refuses to run on Windows 11 even with compatibility mode, you can install the driver manually. Extract the installer .exe with 7-Zip into a folder. Open Device Manager, find the MFC-J1010DW under Other devices or Imaging devices, right-click, pick Update driver, choose Browse my computer, and point it at the extracted folder. Windows locates the .inf file and installs the basic driver. You lose Brother Mobile Connect, PC-FAX, and status monitoring on the desktop this way, but print and scan both work.
If the scanner doesn’t work after install
- Scanner driver installed but the MFC-J1010DW doesn’t appear in Brother Mobile Connect or Windows Scan. Open Device Manager and check under Imaging devices for a yellow warning. Reinstall the Printer and Scanner Driver for USB from the Windows section above if the Full Package scanner component didn’t register.
- Scan works in Brother Mobile Connect but not Windows Fax and Scan or third-party TWAIN apps. Windows Fax and Scan uses WIA. Make sure the Windows Image Acquisition service is running (Services.msc). Third-party TWAIN apps need the Brother TWAIN driver component, which installs with the Full Package.
- ADF scans come out blank or skip pages. Clean the ADF rollers and the scan glass strip under the document feeder. The 20-sheet ADF needs clean rollers to feed reliably.
- Scan-to-phone from Brother Mobile Connect needs the printer and phone on the same 2.4 GHz network. If the phone connects on 5 GHz and the printer on 2.4 GHz through the same mesh SSID, the discovery sometimes fails. Pin the phone to the 2.4 GHz band for the scan session.
- Free scanner alternatives if Brother Mobile Connect misbehaves: NAPS2 (Windows, reliable TWAIN wrapper), Windows Scan from Microsoft Store, Image Capture (built into macOS), SimpleScan (most Linux distros with SANE and brscan support).
Set up fax on the MFC-J1010DW
The MFC-J1010DW handles fax both from the device directly (using the keypad and the LINE jack on the back) and from your computer through the PC-FAX driver installed with the Full Package. The device has a 14.4k bps fax modem, 170 pages of fax memory, and 40 auto-dial locations.
For PC-FAX on Windows, the Full Driver and Software Package installs the Brother PC-FAX client. Open it from Start > Brother > PC-FAX, pick the MFC-J1010DW, and send a fax from any application that prints (choose Brother PC-FAX as the printer target instead of the regular print driver). On Linux, the PC FAX Driver package (deb or rpm from the Linux section above) adds a pseudo-printer that routes print jobs to fax dial.
If outgoing fax calls don’t connect, check that the phone line is in the LINE jack and that no other device on the same line is off-hook. For voice-plus-fax lines, configure the ring delay on the control panel under Menu > Fax > Setup Receive > Ring Delay. The default is usually four rings.
Ink cartridges for the MFC-J1010DW
The MFC-J1010DW uses Brother Genuine LC401 ink cartridges in the standard-yield version and LC401XL in the high-yield version, available in black, cyan, magenta, and yellow. These are listed as the compatible cartridges on Brother’s own product page for the MFC-J1010DW. For current page yields and exact part numbers for each color, check Brother’s own product pages for LC401 and LC401XL, since yields vary by color and Brother updates the yield specifications over time.
When you replace a cartridge, open the ink cartridge cover on the front of the printer, push the old cartridge down and slide it out, remove the protective tape from the new cartridge, slide it in until it clicks, and close the cover. The MFC-J1010DW’s control panel confirms the new cartridge and runs a short priming cycle. There’s no toner counter reset on inkjet models like this one, so unlike the laser MFC and HL siblings, you don’t need to go into a menu to clear an “Install new toner” indicator after a swap.
Aftermarket inkjet cartridges work in the MFC-J1010DW to varying degrees. Color accuracy is hit-or-miss with non-Brother ink because the Brother firmware calibrates color registration using the cartridge chip data. I don’t recommend specific aftermarket brands for this model.
Known issues with the MFC-J1010DW
Microsoft is phasing out the printer driver frameworks that older models like this one rely on, so previously working Brother drivers may stop functioning after a Windows 11 feature update. If the Brother driver fails after an update, add the printer using Windows’ built-in generic IPP class driver instead: open Settings > Bluetooth & devices > Printers & scanners > Add device > The printer that I want isn’t listed > Add a printer using a TCP/IP address, enter the MFC-J1010DW’s IP address (shown on the control panel under Network info), and pick IPP as the protocol.
Wi-Fi 2.4 GHz only is a common wireless gripe. Brother’s spec page lists Wireless 802.11 b/g/n, which are all 2.4 GHz standards. The MFC-J1010DW has no Ethernet port, so if your Wi-Fi setup is 5 GHz only, there’s no wired fallback. You’d need to enable the 2.4 GHz band on the mesh, use a separate 2.4 GHz SSID for the printer, or use Wi-Fi Direct for peer-to-peer printing.
Brother marks the MFC-J1010DW as discontinued hardware. The drivers are still hosted on this page and still install cleanly, but there’s no new firmware pipeline coming from Brother for this generation.
On older macOS releases before Mojave 10.14, Brother did not publish a driver for the MFC-J1010DW. The oldest supported macOS on this page is Mojave 10.14. If you’re on High Sierra 10.13 or older, AirPrint may provide basic printing because the MFC-J1010DW is AirPrint-certified, but the Brother Full Software Package will not install.
How to fully uninstall the MFC-J1010DW driver
On Windows: open Settings > Apps > Installed apps, search for “Brother MFC-J1010DW” and “Brother”, and uninstall each entry you find (Full Driver and Software Package, Brother Mobile Connect, Brother Utilities, PC-FAX). Reboot. Then open Settings > Printers & scanners and remove any lingering MFC-J1010DW entries. For a deeper clean, run the Brother uninstaller shipped with the driver (Start > Brother > Uninstall Utility) or use Print Management (printmanagement.msc) to remove the driver package from the Driver Store.
On macOS: drag the Brother folder from Applications to Trash, open System Settings > Printers & Scanners, select the MFC-J1010DW, and click the minus button. For the Full Software Package, run the Uninstaller app that came in the .dmg (it’s in the same disk image as the installer).
On Linux: remove the Brother packages with your distro’s package manager. The CUPS web interface at localhost:631 shows active queues and removes them cleanly. The brscan scanner driver and PC FAX driver uninstall through the same package manager flow.
MFC-J1010DW at a glance
| Spec | Value |
|---|---|
| Type | Color inkjet multifunction (print, copy, scan, fax) |
| Print speed | Up to 17 ppm black and white, 9.5 ppm color |
| Duplex | Automatic duplex print (default). No duplex scan, copy, or fax. |
| ADF capacity | 20-sheet automatic document feeder |
| Paper input | 150-sheet standard paper tray |
| Output capacity | 50 sheets |
| Display | 1.8-inch color display |
| Connectivity | Hi-Speed USB 2.0, Wireless 802.11 b/g/n, Wi-Fi Direct (no Ethernet) |
| Fax | 14.4k bps modem, 170-page memory, 40 auto-dial locations, PC-FAX |
| Mobile printing | AirPrint, Mopria, Brother Mobile Connect, Wi-Fi Direct |
| Ink cartridges | Brother Genuine LC401 Standard or LC401XL High Yield (BK, C, M, Y) |
| Weight (approx.) | 16.4 lb |
| Dimensions (approx.) | 15.7 x 13.5 x 6.8 inches |
| Supported Windows | 11, 10, 8.1, 7 (32-bit and 64-bit) |
| Supported macOS | 10.14 Mojave through 14 Sonoma |
| Linux | Printer, scanner (32-bit and 64-bit), and PC FAX packages (deb and rpm) |
| Support status | Discontinued (drivers still available) |
Frequently Asked Questions
How can I download the Brother MFC-J1010DW driver and software?
Right here on this page. Scroll up to the Driver files section, pick the Full Driver and Software Package for your operating system, and click Download. Every file is hosted on this page and sourced directly from Brother’s official release, with no signup wall or bundled extras.
How do I install the Brother MFC-J1010DW?
Download the Full Driver and Software Package from the Windows section above, run it as administrator, and when the installer asks for connection type, pick USB (plug the cable when prompted) or Wireless Network. Install the starter ink cartridges first if you haven’t already, since the MFC-J1010DW needs ink loaded to complete its startup calibration. The installer handles the color print driver, scanner, Brother Mobile Connect, PC-FAX, and the wireless setup wizard in one install.
Do I need to install a driver for the MFC-J1010DW?
Yes, for the full feature set. Windows may install a generic PostScript or PCL driver automatically when you connect the printer, which gives you basic color printing. For duplex, ink level monitoring, scanning, PC-FAX, and Brother Mobile Connect, install the Full Driver and Software Package from the Windows section above. macOS can print through AirPrint without the Brother driver because the MFC-J1010DW is AirPrint-certified, but scanning needs the Brother macOS package.
Does the MFC-J1010DW have Ethernet?
No. Brother’s spec page lists Hi-Speed USB 2.0 and Wireless 802.11 b/g/n with Wi-Fi Direct. There’s no Ethernet port on the MFC-J1010DW. If you need a wired network connection, Wi-Fi Direct lets a specific computer pair directly with the printer, or you can run a USB cable to a computer and share the printer over the network from there.
Why can’t the MFC-J1010DW find my Wi-Fi?
Wi-Fi 2.4 GHz only. Brother’s spec page lists Wireless 802.11 b/g/n, and those are all 2.4 GHz standards. The MFC-J1010DW does not see 5 GHz networks. If your router or mesh system is broadcasting 5 GHz only, enable the 2.4 GHz band or create a separate 2.4 GHz SSID for the printer. Because there’s no Ethernet on this model, wireless is the only network option, so 2.4 GHz has to work.
LC401 or LC401XL for the MFC-J1010DW?
Both fit. Brother lists the MFC-J1010DW as compatible with Brother Genuine LC401 Standard yield and LC401XL High Yield cartridges, in black, cyan, magenta, and yellow. LC401XL is usually the better cost per page unless you print only occasionally. Check Brother’s own LC401 and LC401XL product pages for current page yields, since they vary by color and Brother updates the yield specs over time.
Does the MFC-J1010DW driver install on Windows 11?
In most cases yes, straight from the Full Driver and Software Package above. If the installer stalls or fails on a recent Windows 11 build, right-click the installer, open Properties > Compatibility, and run it in compatibility mode for Windows 8 first, then step down to Windows 7 if needed. Microsoft is phasing out the legacy driver frameworks older printers like this one use, so a generic IPP add-printer flow is the fallback.
