Two kinds of people land on this page. The first just got a Brother QL-800 label printer out of a box and needs the driver to print address labels or shipping stickers on Windows 11 or macOS. The second has an older QL-800 and wants to know whether the current driver still installs on Windows 11 or on macOS Tahoe 26, since the Brother product page’s listed OS support is older than the actual driver releases available now.
The QL-800 is a direct thermal label printer. It prints on Brother DK-branded label rolls and paper tape over a USB cable. There’s no ink, no toner, no wireless, no scanner, and no fax on this model. Install the Printer Driver from the Windows or macOS section below, run the installer, plug in the USB cable when prompted, load a DK roll, and the printer is ready to print labels through P-touch Editor or any Windows or Mac app that can print.
Below: the Windows driver plus the dedicated uninstaller and the P-touch software installer, the single macOS driver that covers Ventura 13 through Tahoe 26, the Linux CUPS wrapper package (deb and rpm, 32-bit), the DK-1201 and DK-2251 label rolls that ship with the printer, and how two-color black and red printing works on this model.
🖥️Supported Operating Systems
Which driver do I need for the QL-800?
The QL-800 Windows side has three files on this page. The Printer Driver is the main download: it installs the thermal print driver and lets the QL-800 appear in Printers and scanners so any Windows app can print to it. The Printer Driver Uninstaller is a separate small tool from Brother for cleanly removing the driver when you need to (reinstall, replace, or move the printer). The Software or Document Installer installs the P-touch Editor label design software and the P-touch Update tool, which is where most people actually design labels for the QL-800.
I recommend installing the Printer Driver first, then the Software or Document Installer second to get P-touch Editor for label design. The Uninstaller stays on the shelf until you need it. On macOS, a single Printer Driver covers macOS Ventura 13 through Tahoe 26. On Linux, pick either the deb or the rpm 32-bit CUPS wrapper package depending on your distribution.
Brother QL-800 Drivers for Windows
Brother QL-800 Drivers for macOS
Printer Driver (macOS 13 to 26)
Brother QL-800 Drivers for Linux
Before you install
- Sign in to Windows or macOS with an administrator account.
- Have the printer powered on. Don’t plug in the USB cable yet (the installer asks for it at the right step).
- Close other apps, especially office suites and PDF viewers, so nothing holds a print handle while the installer runs.
- The QL-800 ships with a USB 2.0 type B cable, a DK-1201 die-cut address label starter roll (100 labels), and a DK-2251 continuous black and red paper tape roll (16.4 feet). Load one of them into the printer before you run the installer so you can run a test print at the end of install.
- Note that the QL-800 is USB-only. There’s no wireless or Ethernet on this model, so the installer only asks about USB connection.
Install the QL-800 driver step by step
Pick the download next to the Printer Driver in the Windows section above. Your browser saves the installer to your Downloads folder.
- Right-click the downloaded .exe and pick Run as administrator.
- Accept the license agreement when prompted.
- The installer shows the Brother QL-800 setup wizard. Follow the on-screen prompts.
- Plug the USB cable into the printer and the computer when the installer asks, and wait for the setup wizard to detect the printer.
- Pick the Standard Install option when offered.
- Run a test print when the installer finishes to confirm the driver is talking to the printer.
- Run the Software or Document Installer from the Windows section above to add P-touch Editor for label design. This is a separate download and a separate installer from the Printer Driver.
Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.
On macOS: open the .dmg file you downloaded, run the installer inside, follow the connection-type prompts, and add the printer through System Settings > Printers & Scanners when the installer asks. The single Printer Driver covers macOS 13 Ventura through 26 Tahoe. P-touch Editor for Mac is a separate download from Brother and is not bundled in the Printer Driver .dmg.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The QL-800 should be listed with status Ready, not Offline.
- Print the test label from the device’s properties. A short address label print confirms the driver is talking to the printer and the DK roll is loaded correctly.
- Launch P-touch Editor (Windows, installed by the Software or Document Installer) and confirm the QL-800 appears in the printer target list. For macOS, download P-touch Editor for Mac from Brother separately.
- Check Device Manager (Windows) for any yellow warning icons under Printers. A clean tree means the driver signed and loaded without issue.
DK labels and tapes for the QL-800
The QL-800 uses Brother DK-branded label rolls and continuous paper or film tapes. The box ships with two starter rolls: a DK-1201 roll of 100 die-cut standard address labels, and a DK-2251 roll of 2.4-inch (62 mm) continuous black and red on white paper tape, 16.4 feet long. Those two rolls let you print both pre-cut address labels and the two-color black and red output right out of the box.
Replacement rolls from Brother cover pre-sized die-cut labels in multiple sizes (address, shipping, file folder, round, and more), continuous paper tapes for custom-length labels, and continuous film tapes for water-resistant labels. The maximum print width on the QL-800 is 62 mm (about 2.4 inches), and the maximum label length is 3 feet for continuous tape.
Loading a roll is a quick swap: open the roll cover on the top of the printer, drop in the new DK roll, feed the leading edge into the slot, close the cover, and the QL-800 cuts a short leader strip and the printer is ready. The control panel on the top of the printer has only a few buttons (Power, Feed, Cutter), so there’s no menu to navigate for roll changes.
P-touch Editor and label design software
Brother ships P-touch Editor as the companion label design software for the QL-800. On Windows, you get it by running the Software or Document Installer from the Windows section above, which drops P-touch Editor and P-touch Update onto your machine. On Mac, download P-touch Editor for Mac directly from Brother’s software page for the QL-800, since it isn’t bundled in the macOS Printer Driver .dmg on this page.
P-touch Editor lets you lay out address labels, shipping labels, barcodes (1D and 2D including QR), name badges, and continuous tape with custom lengths. It also handles mail merge from Excel or CSV for printing a run of unique labels from a spreadsheet. Any Windows or Mac app that prints can also send a job to the QL-800 through the standard print driver, so you’re not forced to use P-touch Editor if your existing workflow already produces correctly sized label output.
Two-color printing on the QL-800
The QL-800 can print in black and red using the DK-2251 continuous paper tape that ships with the printer. This is a direct thermal process, not inkjet or laser two-color: the DK-2251 tape has two thermal-sensitive layers and the QL-800’s print head heats at different temperatures to activate either the black or the red layer. Standard DK label rolls other than DK-2251 are single-color black only.
In P-touch Editor, pick DK-2251 as the roll type for the current layout and the color picker opens up black and red as the two available colors. Jobs sent through the standard print driver (from Word, from a browser, from any app) print in black only even on DK-2251 tape, because the standard driver sends a single-channel grayscale image. For two-color output you print through P-touch Editor specifically.
If install fails
- Previous Brother QL-800 driver stuck in Windows. Run the Printer Driver Uninstaller from the Windows section above, reboot, and then run the Printer Driver installer again. The dedicated Uninstaller clears driver state that regular Programs and Features uninstall sometimes leaves behind.
- USB connection not detected. Try a different USB port, prefer a direct port on the computer over a USB hub, and swap the cable. Confirm the Power light on the printer is on and steady before clicking Next in the installer. The QL-800 uses Hi-Speed USB 2.0.
- Driver installs but printer shows Offline. Open Settings > Printers & scanners, open the QL-800 entry, and uncheck Use printer offline. If that’s already off, restart the Print Spooler service.
- Installer fails on Windows 11 with no clear error. Right-click the installer, open Properties > Compatibility, and check Run this program in compatibility mode for. Try Windows 8 first since the driver officially covers Windows 10. If that doesn’t take, step down to Windows 7. Save after each change and run the installer as administrator.
- “Driver unavailable” or Unknown Device in Device Manager. Remove the printer from Printers & scanners, open Device Manager, right-click the Unknown Device under Other devices, pick Update driver > Browse my computer, and point it at the extracted installer folder.
- Admin rights error mid-install. Close the installer, right-click the .exe again, pick Run as administrator, and confirm the UAC prompt.
- Test label prints blank or faint. Confirm the DK roll is seated correctly (the roll cover should close flush), that you picked the correct DK roll type in the driver or in P-touch Editor, and that the thermal head isn’t dirty. The QL-800 has no ink or toner; a blank print almost always means the DK roll isn’t making full contact with the thermal head.
Known issues with the QL-800
Microsoft is phasing out the printer driver frameworks that older models like this one rely on, so previously working Brother drivers may stop functioning after a Windows 11 feature update. If the Brother driver fails after an update, uninstall it with the Printer Driver Uninstaller from the Windows section above, reboot, and run the Printer Driver installer again. The QL-800 is USB-only so there’s no IPP network fallback path.
USB-only connectivity is worth calling out. The QL-800 has no wireless and no Ethernet, so every setup runs through a physical cable. If you need wireless label printing from this printer, you’d either plug it into a USB print server appliance or move to a QL-810W or QL-820NWB in the same Brother label-printer line, which have wireless or network built in.
Brother’s product page for the QL-800 lists an older OS support matrix (Windows Vista through 10, and Mac OS X 10.10.5 through 10.13). The driver releases you find on this page extend QL-800 support to Windows 11 and to macOS 13 Ventura through 26 Tahoe. The driver download page catches up to current OS releases faster than the marketing spec page does.
Two-color red and black printing works only with DK-2251 continuous paper tape, not with standard DK label rolls. If you expect red output on a DK-1201 die-cut address label, that won’t happen because DK-1201 is single-layer thermal paper.
How to fully uninstall the QL-800 driver
On Windows: run the Printer Driver Uninstaller from the Windows section above. This is Brother’s own dedicated tool and it clears the QL-800 driver cleanly from Printers and scanners, from the Driver Store, and from Device Manager in one pass. If you also installed P-touch Editor and want to remove it, open Settings > Apps > Installed apps, search for “P-touch”, and uninstall each entry you find. Reboot after both uninstalls complete.
On macOS: drag the Brother folder from Applications to Trash, open System Settings > Printers & Scanners, select the QL-800, and click the minus button. For P-touch Editor on Mac (if you downloaded it separately), drag the P-touch Editor app to Trash as well.
On Linux: remove the Brother package with your distro’s package manager. The CUPS web interface at localhost:631 shows active queues and removes them cleanly.
QL-800 at a glance
| Spec | Value |
|---|---|
| Type | Direct thermal label printer |
| Print resolution | Up to 300 x 600 dpi |
| Print speed | Up to 93 standard address labels per minute (text only, 300 x 300 dpi) |
| Max print width | 62 mm (approximately 2.4 inches) |
| Max label length | 3 feet (continuous tape) |
| Two-color printing | Black and red with DK-2251 continuous paper tape |
| Connectivity | Hi-Speed USB 2.0 (no wireless, no Ethernet) |
| Included DK rolls | DK-1201 die-cut address labels (100-label starter roll) and DK-2251 black and red continuous paper tape (16.4 feet) |
| Included software | P-touch Editor 5.2 (Windows) or 5.1 (Mac), P-touch Address Book 1.2 (Windows), P-touch Update Software (Windows and Mac) |
| Weight | 2.5 lb |
| Dimensions | 4.9 x 8.4 x 5.6 inches |
| Supported Windows | 11, 10 (32-bit and 64-bit) |
| Supported macOS | 13 Ventura, 14 Sonoma, 15 Sequoia, 26 Tahoe |
| Linux | CUPS wrapper and LPR packages (deb and rpm, 32-bit) |
Frequently Asked Questions
How can I download the Brother QL-800 driver and software?
Right here on this page. Scroll up to the Driver files section, pick the Printer Driver for your operating system, and click Download. For Windows, run the Software or Document Installer afterwards to get P-touch Editor for label design. Every file is hosted on this page and sourced directly from Brother’s official release, with no signup wall or bundled extras.
How do I set up the Brother QL-800 label printer?
Four steps: download the Printer Driver from the Windows or macOS section above, run it as administrator, plug in the USB cable when the installer prompts, and load a DK roll into the printer. The QL-800 is USB-only, so there’s no wireless setup. After the driver install finishes, run the Software or Document Installer (Windows) to add P-touch Editor for label design, or download P-touch Editor for Mac separately from Brother.
Does the QL-800 driver install on Windows 11?
Yes. The Printer Driver in the Windows section above officially covers Windows 11 and Windows 10 (32-bit and 64-bit). Brother’s product page lists older OS support (Vista through 10), but the current driver release extends to Windows 11. If the installer stalls or fails on a recent Windows 11 build, right-click the installer, open Properties > Compatibility, and run it in compatibility mode for Windows 8 or 7.
Does the QL-800 work on macOS Tahoe 26?
Yes. The macOS Printer Driver in the macOS section above is a single file that covers macOS 13 Ventura, 14 Sonoma, 15 Sequoia, and 26 Tahoe. Brother’s product page lists older Mac OS X support (10.10 through 10.13) because the page hasn’t been updated, but the actual driver release handles the current macOS lineup.
Can I use the QL-800 wirelessly?
No. The QL-800 is USB-only. There’s no wireless or Ethernet on this model. If you need wireless label printing, Brother’s QL-810W and QL-820NWB in the same label-printer line add wireless and network. Workaround if you already own a QL-800: plug it into a USB print server appliance that advertises the printer on the network, or share the QL-800 from a Windows or Mac machine that’s connected over USB.
What DK labels work with the QL-800?
Brother DK-branded label rolls and paper or film tapes. The box ships with DK-1201 die-cut standard address labels (100 labels per roll) and DK-2251 continuous black and red paper tape (16.4 feet). Brother sells replacement rolls in die-cut sizes (address, shipping, file folder, round, and more), continuous paper tape for custom-length labels, and continuous film tape for water-resistant labels. The maximum print width is 62 mm (about 2.4 inches), and the maximum label length is 3 feet for continuous tape.
How does black and red two-color printing work on the QL-800?
Only with the DK-2251 continuous paper tape, and only through P-touch Editor. The DK-2251 tape has two thermal-sensitive layers that the QL-800’s print head activates at different temperatures to produce black or red output. In P-touch Editor, pick DK-2251 as the roll type and the color picker opens up both black and red. Jobs sent through the standard Windows or Mac print driver (from Word, from a browser, from any app) print in black only even on DK-2251 tape, because the standard driver uses a single-channel grayscale image. Standard DK rolls other than DK-2251 are single-color black only.
