The Canon i-SENSYS MF3010 is a compact monochrome laser multifunction with print, scan, and copy over USB, and its driver install splits in a couple of unusual ways. First, Canon ships separate printer and scanner driver packages per macOS version range (not one bundled Full Package), so a Mac install is a two-download affair for most macOS versions. Second, the MF Drivers for Windows cover the full XP through 11 range in one package, but the newer UFR II V4 driver is a separate download that only covers Windows 8.1 through 11.
Grab the MF Drivers from the Windows section below, run it as administrator, and plug in the USB cable when prompted. The MF3010 has no wireless, no Ethernet, no fax, and no ADF. It’s a USB-connected laser with a flatbed scanner on top. The Windows installer handles the printer driver, the scanner driver (TWAIN and WIA), MF Toolbox for scan-to-file and scan-to-email flows, and the uninstaller in one install.
Below: the two Windows downloads (MF Drivers and the newer UFR II V4 driver), the long macOS list split into Printer Driver and Scanner Driver packages per OS version, the single Linux UFR II/UFRII LT package, the Canon 725 toner that fits this model (sold as Canon 125 in the United States), and what to do when Windows 11 refuses the installer after a recent update.
🖥️Supported Operating Systems
Which driver do I need for the MF3010?
On Windows, the MF Drivers package is the main download: it covers printer driver, scanner driver (TWAIN and WIA), MF Toolbox utilities, and the setup wizard, all in one install covering Windows 11 down to XP. The newer UFR II V4 Printer Driver is a smaller Windows-only alternative for people who want just the printer driver on Windows 8.1 through 11, without the scanner and MF Toolbox, built on Microsoft’s v4 print driver architecture.
I recommend the MF Drivers package for most installs because the MF3010’s main value on the desktop comes from the bundled scanner tools; the UFR II V4 driver skips those. Pick UFR II V4 only if you print from the MF3010 but scan from somewhere else, or if you’re deploying print-only through a mass-deployment tool. On macOS, pick the MF Printer Driver matching your macOS version for printing, and add the matching Scanner Driver separately if you want to scan from the Mac. On Linux, the UFR II/UFRII LT package handles printing through CUPS.
Canon i-SENSYS MF3010 Drivers for Windows
Canon i-SENSYS MF3010 Drivers for macOS
MF Printer Driver (macOS 10.12 to 13)
Scanner Driver (macOS 10.13 to 13)
MF Printer Driver (OS X 10.11 to macOS 12)
Scanner Driver (macOS 10.12 Sierra)
Scanner Driver (OS X 10.11 El Capitan)
MF Printer Driver (OS X 10.10 Yosemite)
Scanner Driver (OS X 10.10 Yosemite)
MF Printer Driver (OS X 10.9 Mavericks)
Scanner Driver (OS X 10.9 Mavericks)
MF Printer Driver (OS X 10.8 Mountain Lion)
Scanner Driver (OS X 10.8 Mountain Lion)
MF Printer Driver (OS X 10.7 Lion)
Scanner Driver (OS X 10.7 Lion)
MF Printer Driver (OS X 10.6 Snow Leopard)
Scanner Driver (OS X 10.6 Snow Leopard)
MF Printer Driver (OS X 10.5 Leopard)
Scanner Driver (OS X 10.5 Leopard)
TWAIN Scanner Driver (OS X 10.5-10.11)
Canon i-SENSYS MF3010 Drivers for Linux
UFR II/UFRII LT Driver (Linux)
Before you install
- Sign in to Windows or macOS with an administrator account.
- Have the printer powered on. Don’t plug in the USB cable yet (the installer asks for it at the right step).
- Close other apps, especially office suites and PDF viewers, so nothing holds a print handle while the installer runs.
- The MF3010 is USB-only. There’s no wireless, no Ethernet, and no network setup on this model. Every install goes through a USB cable.
- The scanner on the MF3010 is a flatbed only, no ADF. If you were expecting to feed a stack of documents, that’s not part of this model.
- Note that the MF3010 is sold as Canon i-SENSYS MF3010 in Europe and as Canon imageCLASS MF3010 in the United States. The hardware is the same; the toner part numbers differ by region.
Install the MF3010 driver step by step
Pick the download next to the MF Drivers in the Windows section above. Your browser saves the installer to your Downloads folder.
- Right-click the downloaded .exe and pick Run as administrator.
- Accept the license agreement when prompted.
- Follow the on-screen prompts. The MF Drivers installer installs the printer driver, the scanner driver, and MF Toolbox in sequence.
- Plug the USB cable into the printer and the computer when the installer asks, and wait for the setup wizard to detect the printer.
- Pick the Standard Install option for the full driver stack with MF Toolbox, or a minimal install if you only need the print driver.
- When the installer offers to set the MF3010 as default printer, leave that checked if it’s your main device.
- Run a test print when the installer finishes to confirm the setup worked. For scanning, open MF Toolbox from the desktop shortcut and run a test scan.
Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.
On macOS: open the MF Printer Driver .dmg for your macOS version, run the installer inside, follow the connection-type prompts, and add the printer through System Settings > Printers & Scanners when the installer asks. Install the MF Printer Driver first, then open the Scanner Driver .dmg for the same (or adjacent) macOS version and install the scanner side. Canon ships these as two separate packages on macOS, so a full install is a two-download affair.
What to check after install
- Open Settings > Printers & scanners (Windows) or System Settings > Printers & Scanners (macOS). The MF3010 should be listed with status Ready, not Offline.
- Print the test page from the device’s properties. A short monochrome page confirms the driver is talking to the printer.
- Open MF Toolbox on Windows (or Image Capture on macOS), pick the MF3010 as the scanner, and run a test flatbed scan. The scanner should appear as a separate device from the printer.
- Check Device Manager (Windows) for any yellow warning icons under Printers or Imaging devices. A clean tree means the drivers signed and loaded without issue.
If install fails
- Previous Canon driver stuck in Windows. Open Settings > Printers & scanners, remove any older MF3010 entries, uninstall “Canon MF3010” and “MF Toolbox” from Programs and Features, reboot, and rerun the installer. Half-finished state from an older install blocks the new one.
- USB connection not detected. Try a different USB port, prefer a direct port on the computer over a USB hub, swap the cable, and confirm the printer’s control panel shows Ready before clicking Next. The MF3010 uses Hi-Speed USB 2.0. A USB 3.0 port on the computer works, but a flaky USB 3.0 controller is a known source of detection failures. Try a USB 2.0 port if your computer has one.
- Driver installs but printer shows Offline. Open Settings > Printers & scanners, open the MF3010 entry, and uncheck Use printer offline. If that’s already off, restart the Print Spooler service.
- Installer fails on Windows 11 with no clear error. Right-click the installer, open Properties > Compatibility, and check Run this program in compatibility mode for. Try Windows 8 first since the driver officially covers Windows 10. If that doesn’t take, step down to Windows 7, then Windows Vista (Service Pack 2), then Windows XP (Service Pack 3) as a last resort. Save after each change and run the installer as administrator.
- “Driver unavailable” or Unknown Device in Device Manager. Remove the printer from Printers & scanners, open Device Manager, right-click the Unknown Device under Other devices, pick Update driver > Browse my computer, and point it at the extracted installer folder.
- Admin rights error mid-install. Close the installer, right-click the .exe again, pick Run as administrator, and confirm the UAC prompt.
- MF Drivers installer stalls partway through. The MF Drivers package installs three components (print driver, scanner driver, MF Toolbox) in sequence. If the installer freezes, let it run for at least five minutes before killing it. A reboot and a rerun almost always finishes the install cleanly.
Manual install via INF file
If the bundled installer refuses to run on Windows 11 even with compatibility mode, you can install the driver manually. Extract the installer .exe with 7-Zip into a folder. Open Device Manager, find the MF3010 under Other devices or Imaging devices, right-click, pick Update driver, choose Browse my computer, and point it at the extracted folder. Windows locates the .inf file and installs the basic driver. You lose MF Toolbox on the desktop this way, but print and scan both work through the standard Windows print and WIA stacks.
If the scanner doesn’t work after install
- Scanner driver installed but the MF3010 doesn’t appear in MF Toolbox or Windows Scan. Open Device Manager and check under Imaging devices for a yellow warning. Reinstall the MF Drivers package from the Windows section above if the scanner component didn’t register, or install the UFR II V4 driver alongside it only if you need the v4 print driver separately.
- Scan works in MF Toolbox but not Windows Fax and Scan or third-party TWAIN apps. Windows Fax and Scan uses WIA. Make sure the Windows Image Acquisition service is running (Services.msc). Third-party TWAIN apps on Windows get the Canon TWAIN driver component installed by MF Drivers, but some older TWAIN apps need to be pointed at the Canon TWAIN source explicitly.
- On macOS, the scanner needs the Scanner Driver .dmg installed separately from the Printer Driver. Image Capture does not see the MF3010 as a scanner until the Scanner Driver for your macOS version is installed.
- Scan output is blank or has stripes. Clean the flatbed scan glass with a lint-free cloth. The MF3010 has no ADF, so there are no feed rollers to clean, just the glass platen and the inside of the scan lid.
- Free scanner alternatives if MF Toolbox misbehaves: NAPS2 (Windows, reliable TWAIN wrapper), Windows Scan from Microsoft Store, Image Capture (built into macOS), SimpleScan (most Linux distros).
Toner for the Canon MF3010
The Canon i-SENSYS MF3010 uses the Canon 725 toner cartridge in Europe and the Canon 125 toner cartridge in the United States and Canada. Both are the same physical cartridge with different regional part numbers. Canon’s own product page for the imageCLASS MF3010 (US) lists the Canon 125 Black Toner Cartridge as the compatible supply.
After you replace the toner with a fresh Canon cartridge, the “Replace Toner” indicator on the MF3010 control panel usually clears on its own once the new chip reports in. If the indicator stays on, open and close the front cover once to prompt the printer to re-read the cartridge chip. Unlike Brother laser printers, the Canon MF3010 doesn’t have a user-accessible menu toner counter reset: the chip on the Canon cartridge handles the status report directly.
The drum and the toner are an integrated single cartridge on the MF3010 (the Canon 125 and Canon 725 both contain the drum unit inside), so there’s no separate drum part to replace. When the cartridge is empty or the drum wears out, you replace the whole Canon 125 or 725 unit.
Aftermarket toner that works at all typically also prompts the chip to report “unknown cartridge” or “non-genuine cartridge” on the MF3010 display. Print quality varies widely with non-Canon toner. I don’t recommend specific aftermarket brands for this model.
Known issues with the MF3010
Microsoft is phasing out the printer driver frameworks that older models like this one rely on, so previously working Canon drivers may stop functioning after a Windows 11 feature update. The newer UFR II V4 Printer Driver from the Windows section above is Canon’s response to that phase-out for the MF3010 and similar models: it uses Microsoft’s v4 driver architecture, which Windows 11 handles better than the older v3 architecture in the MF Drivers package. If the MF Drivers package fails on Windows 11, try the UFR II V4 driver instead for print functions; you lose the bundled scanner driver and MF Toolbox, but printing keeps working.
USB-only connectivity is worth calling out. The MF3010 has no wireless, no Ethernet, and no fax, so every setup runs through a physical USB cable. If you need wireless printing or scanning from this printer, you’d plug it into a USB print server appliance, share it over the network from a Windows or Mac machine that’s connected over USB, or move to a networked Canon MF model.
No ADF is another limitation worth knowing. The MF3010 has a flatbed scanner only, Letter-size, with no automatic document feeder. Multi-page scanning means lifting the lid, placing each page, closing the lid, and scanning one page at a time. If you have a stack of documents to scan regularly, the MF3010 is not the model for that workflow.
Canon marks the imageCLASS MF3010 as Out of Stock on the US product page, with no estimated ship date. The hardware is effectively end-of-life, but the drivers are still hosted and still install cleanly on current Windows and macOS.
How to fully uninstall the MF3010 driver
On Windows: open Settings > Apps > Installed apps, search for “Canon MF3010”, “MF Drivers”, “MF Toolbox”, and “UFR II”, and uninstall each entry you find. Reboot. Then open Settings > Printers & scanners and remove any lingering MF3010 entries. For a deeper clean, use Print Management (printmanagement.msc) to remove the driver package from the Driver Store.
On macOS: drag the Canon folder from Applications to Trash, open System Settings > Printers & Scanners, select the MF3010, and click the minus button. The MF Printer Driver and Scanner Driver .dmg packages don’t ship with a bundled Uninstaller app, so the Applications cleanup and the queue removal in System Settings cover the full uninstall.
On Linux: the Canon UFR II/UFRII LT package is distributed as a tar.gz source archive with an install script. Run the uninstall script from the extracted archive directory to remove the driver, then remove the CUPS queue from the web interface at localhost:631 or with lpadmin -x.
Canon i-SENSYS MF3010 at a glance
| Spec | Value |
|---|---|
| Type | Monochrome laser multifunction (print, scan, copy; no fax, no ADF) |
| Print speed | Up to 19 ppm Letter, up to 24 ppm Legal |
| First print time | Approximately 8 seconds |
| Scanner | Flatbed only, Letter-size platen |
| Scan resolution | 300 x 300 dpi up to 600 x 600 dpi (color contact image sensor) |
| Copy | 50% to 200% magnification, first copy time approximately 12 seconds |
| Paper input | 150-sheet paper tray with single-sheet manual feed |
| Connectivity | Hi-Speed USB 2.0 only (no wireless, no Ethernet) |
| Toner cartridge | Canon 725 (Europe) or Canon 125 (United States). Integrated drum. |
| Supported Windows | 11, 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit) |
| Supported macOS | 10.5 Leopard through 13 Ventura |
| Linux | UFR II/UFRII LT driver (tar.gz source archive) |
| Regional names | Canon i-SENSYS MF3010 (Europe) or Canon imageCLASS MF3010 (United States) |
| Support status | Out of Stock on Canon US product page (effectively end-of-life); drivers still available |
Frequently Asked Questions
How can I download the Canon MF3010 printer driver?
Right here on this page. Scroll up to the Driver files section, pick the MF Drivers package for your operating system, and click Download. For Windows, the MF Drivers package covers the full Windows 11 through XP range in one install. On macOS, pick the MF Printer Driver for your macOS version and the matching Scanner Driver separately. Every file is hosted on this page and sourced directly from Canon’s official release.
How do I install the MF3010 scanner driver?
On Windows, the scanner driver is bundled into the MF Drivers package in the Windows section above, together with MF Toolbox. Install MF Drivers as administrator and the scanner shows up in Windows Scan, Windows Fax and Scan, MF Toolbox, and any third-party TWAIN app. On macOS, Canon ships the scanner driver as a separate .dmg from the printer driver. After installing the MF Printer Driver for your macOS version, install the Scanner Driver for the same (or adjacent) macOS version, then open Image Capture to confirm the MF3010 appears as a scanner.
How do I connect the Canon MF3010 to my computer?
USB cable only. The MF3010 has no wireless, no Ethernet, and no network interface. Plug a Hi-Speed USB 2.0 cable (type B on the printer end, type A on the computer end) into the printer and the computer, then run the MF Drivers installer from the Windows section above. The installer prompts you to connect the USB cable at the right step. For macOS, run the MF Printer Driver .dmg installer and plug in USB when prompted.
Does the MF3010 driver install on Windows 11?
In most cases yes, straight from the MF Drivers package above. If the installer stalls or fails on a recent Windows 11 build, Canon also publishes a newer UFR II V4 Printer Driver for Windows 8.1 through 11 that uses Microsoft’s v4 driver architecture, which Windows 11 handles more reliably than the older v3 architecture in MF Drivers. The UFR II V4 driver installs printing only (no scanner, no MF Toolbox), so pair it with MF Drivers if you need scanning on Windows 11 and MF Drivers alone doesn’t install cleanly.
Canon 725 or Canon 125 toner for the MF3010?
Both are the same cartridge with different regional part numbers. Canon 725 is the European part number, used with the i-SENSYS MF3010. Canon 125 is the US/Canada part number, used with the imageCLASS MF3010. The hardware is identical; the toner part is the same physical cartridge. Buy whichever one is sold in your region. The Canon 125/725 is an integrated cartridge with the drum built in, so there’s no separate drum replacement part for the MF3010.
Does the Canon MF3010 work on macOS Ventura 13?
Yes. The MF Printer Driver for macOS 10.12 to 13 in the macOS section above covers macOS Sierra 10.12 through Ventura 13. Pair it with the Scanner Driver for macOS 10.13 to 13 if you need scanning. Canon has not published a dedicated driver for macOS Sonoma 14 or Sequoia 15 for this model, so if you’re on a newer macOS than Ventura, the Ventura driver may or may not install cleanly depending on the macOS release.
Does the MF3010 have Wi-Fi or Ethernet?
No. The MF3010 is USB-only. There’s no wireless, no Ethernet, and no network interface of any kind. If you need wireless laser printing from Canon, a different model in the i-SENSYS or imageCLASS lineup (MF4xx or MF6xx series with W suffix) adds wireless. For the MF3010 specifically, the workaround for wireless use is a USB print server appliance that advertises the printer on the network.
