Epson EcoTank ET-4800 Driver Download

Two kinds of people land on this page. The first just bought an ET-4800 for a small or home office setup and wants fax, scan, copy, print, and an ADF under one lid, with the Ethernet port going straight into the office switch. The second is coming from an older EcoTank like the ET-4700 and already knows the EcoTank setup rhythm, so they just need the driver and software fresh. Either way, the Windows and macOS downloads are below, followed by the install walkthrough and the fixes for the install snags that come up most often on this model.

🖥️Supported Operating Systems

Windows

Windows11 (64-bit), 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit)

macOS

macOSSequoia 15 through Mac OS X Snow Leopard 10.6

Which driver do I need for the EcoTank ET-4800?

On Windows, three driver families cover the ET-4800. The Drivers and Utilities Combo Package is a small 13 MB bootstrap installer that pulls printer, scanner, and Epson utilities together during the first run. The standalone Printer Driver is a 33-40 MB package, the Scanner Driver and Epson Scan 2 Utility bundle is 64 MB, and the Remote Print Driver is a separate download for printing from apps that target a remote network printer.

OS coverage differs slightly by driver. The Combo Package covers Windows 11 (64-bit) and Windows 10, 8.1, 8, 7, and Vista (32-bit and 64-bit). The standalone Printer Driver covers 11 through 7 but not Vista. The Scanner Driver follows the same range. Only the Remote Print Driver extends back to Windows XP and Vista.

On macOS, the pattern is simpler: one Combo Package covering Mac OS X Lion 10.7 through macOS Sequoia 15, plus standalone Printer Driver, Scanner Driver, and Remote Print Driver packages that reach Mac OS X Snow Leopard 10.6 at the bottom and Sequoia 15 at the top.

Epson EcoTank ET-4800 Drivers for Windows

Printer Driver (64-bit)

Windows 11 (64-bit), 10, 8.1, 8, 7 (64-bit). Printer driver package.

40.39 MBDownload

Printer Driver (32-bit)

Windows 10, 8.1, 8, 7 (32-bit). Printer driver package.

33.9 MBDownload

Scanner Driver and Epson Scan 2

Windows 11 (64-bit), 10, 8.1, 8, 7 (32-bit and 64-bit). Scanner driver with the Epson Scan 2 utility.

64.32 MBDownload

Remote Print Driver (64-bit)

Windows 11 (64-bit), 10, 8.1, 8, 7, Vista, XP (64-bit). Driver for apps that target a remote network printer.

23.25 MBDownload

Remote Print Driver (32-bit)

Windows 10, 8.1, 8, 7, Vista, XP (32-bit). Driver for apps that target a remote network printer.

9.42 MBDownload

Epson EcoTank ET-4800 Drivers for macOS

Printer Driver

Mac OS X Snow Leopard 10.6 through macOS Sequoia 15. Printer driver package.

86.47 MBDownload

Scanner Driver and Epson Scan 2

Mac OS X Snow Leopard 10.6 through macOS Sequoia 15. Scanner driver with the Epson Scan 2 utility.

45.45 MBDownload

Remote Print Driver

Mac OS X Snow Leopard 10.6 through macOS Sequoia 15. Driver for apps that target a remote network printer.

26.03 MBDownload

Before you install

  • Run the installer as administrator on Windows (right-click the downloaded file and pick Run as administrator). On macOS, your account needs to be able to install signed drivers, and you may see a system prompt asking you to approve the Epson installer during the first run.
  • Close any open print dialogs, scan apps, or image editors before you start. The installer registers printer, scanner, and fax components, and an open app holding one of those can stall the setup.
  • Make sure the PC has an active internet connection. The Combo Package is a bootstrap that downloads the real driver files from Epson during setup.
  • Have the printer powered on and the ink tanks filled with the Epson 522 starter bottles before you run the installer.
  • Decide how you want to connect. The ET-4800 supports USB, Wi-Fi, and Ethernet. For Wi-Fi, have your network name and password handy. For Ethernet, plug the cable in and the printer gets an IP from your router automatically.
  • If you plan to use the fax function, have your phone line connected to the printer’s LINE port and the fax number ready for the setup wizard.

Install the EcoTank ET-4800 driver step by step

  1. Click the download link next to the Drivers and Utilities Combo Package card above. Your browser saves the installer to your Downloads folder.
  2. Right-click the file and pick Run as administrator. If Windows asks about letting the app make changes, say yes.
  3. Follow the on-screen prompts for connection type. For USB, plug the cable into a direct port on the PC when the installer asks. For Wi-Fi, pick your network name from the list and enter the password. For Ethernet, plug the cable in and pick Ethernet when the installer asks.
  4. Let the installer finish. The Combo Package downloads the printer driver, scanner driver, fax driver, and Epson utilities one after the other during this step.
  5. Print a test page from Windows Settings > Printers & scanners > EPSON ET-4800 Series > Printer properties > Print Test Page.

Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.

What to check after install

  • Open Settings > Printers & scanners. The EPSON ET-4800 Series entry should show as Ready, not offline.
  • Set the ET-4800 as the default printer if that’s how you want it. Turn off “Let Windows manage my default printer” so Windows doesn’t swap it for the last-used printer.
  • Check that the scanner shows up in Settings > Devices and in the Epson Scan 2 Utility. If the ET-4800 appears as a printer but not a scanner, the scanner piece didn’t register and you’ll need to rerun the installer.
  • Test the ADF, not just the flatbed. Load a page or two in the 30-sheet ADF and scan through Epson Scan 2 to confirm the feeder works end-to-end.
  • If you’ll use fax, send a test fax to a known number from the printer’s control panel to confirm the fax module is up.

Print from your phone or Chromebook

The ET-4800 works with AirPrint on iPhone and iPad, Mopria Print Service on Android, and the Epson Smart Panel app on both. For AirPrint and Mopria, the phone and the printer have to be on the same network. If the printer is on Ethernet and your phone is on Wi-Fi, they still need to be on the same subnet; most home routers handle that automatically, but corporate networks с separate VLANs can block discovery.

Chromebook users can add the ET-4800 through Settings > Advanced > Printing > Printers > Add Printer. Chrome OS discovers it over the network through CUPS.

If install fails

  • Combo Package installer stalls at the component-download step. The 13 MB Combo Package is a bootstrap that pulls the real driver files from Epson during setup. If your internet connection drops mid-download or a proxy blocks the second-stage fetch, the installer hangs. Rerun as administrator with a stable connection, or download the standalone Printer Driver and Scanner Driver packages above as a fallback that doesn’t need the online fetch.
  • Previous Epson driver stuck in Windows. Open Settings > Printers & scanners, remove any older ET-4800 or EPSON ET series entries, open Control Panel > Programs and Features, uninstall any “EPSON Printer Software” entries, reboot, then rerun the installer.
  • USB connection not detected. Try a different USB port on the PC (prefer a direct port over a hub), swap the USB cable, and confirm the printer is powered on before clicking Next in the installer.
  • Wi-Fi install can’t find the printer. The ET-4800 uses 2.4 GHz Wi-Fi. If your router broadcasts a single SSID for both 2.4 and 5 GHz and uses band steering, your PC may be on 5 GHz while the printer sits on 2.4 GHz, and discovery fails silently. Either connect the PC to the 2.4 GHz band directly during setup, or temporarily disable 5 GHz on the router. The Ethernet alternative sidesteps the Wi-Fi band question entirely if you can run a cable to the office switch.
  • Ethernet setup doesn’t pick up the printer. Plug the Ethernet cable into both the printer and the router or switch, power-cycle the printer, and wait for the control panel to show a network icon. The printer pulls an IP from DHCP automatically. During install, pick Ethernet when the installer asks for connection type.
  • Driver installs but printer shows offline. Open Settings > Printers & scanners, open the ET-4800 entry, and uncheck Use printer offline. If it flips back on its own, the printer’s network connection dropped. Reconnect from the printer’s control panel.
  • Installer closes silently or hangs on Windows 11. Right-click the installer, open Properties, go to the Compatibility tab, and check Run this program in compatibility mode for. Try Windows 8 first since this driver supports Windows 10 natively. Save and run as administrator.
  • Admin rights error. Make sure the installer runs as administrator (right-click > Run as administrator). On a standard user account, you’ll need an admin password at the UAC prompt.

If the scanner doesn’t work after install

  • Scanner driver missing. If you installed the standalone Printer Driver instead of the Combo Package, the scanner piece wasn’t included. Run the Scanner Driver and Epson Scan 2 installer above to add it.
  • Epson Scan 2 Utility won’t launch. The utility depends on the scanner driver install. Reinstall the Scanner Driver and Epson Scan 2 package, and the utility registers during setup.
  • WIA entry missing in Windows Scan. Reboot once after the scanner driver install. Windows registers WIA (Windows Image Acquisition) scanners during startup, and the first login after a fresh install sometimes needs the reboot to pick it up.
  • ADF won’t feed pages. The 30-sheet ADF has its own pickup mechanism. If pages jam or feed crookedly, check that the paper guides are flush against the stack, the paper is below the max line, and the pages aren’t curled or stuck together.
  • Scanner works in Epson Scan 2 but not in Windows Scan. Some third-party scan apps on Windows only read WIA, not Epson’s TWAIN interface. Use Epson Scan 2 as the primary scan application, or switch to NAPS2 which handles both.

Ink refill and tank issues

The ET-4800 uses Epson 522 ink bottles, same as the ET-2803. The starter set в the box is one 65 mL black bottle and 65 mL bottles of cyan, magenta, and yellow. Epson’s published bundled yield (Australia methodology) is 3,600 pages black and 6,500 pages color; replacement bottles are rated 4,500 pages black and 7,500 pages color.

  • Initial fill takes time on first setup. After you pour all four bottles into the tanks, the printer charges the ink system through its own primers. Don’t interrupt power during this charge or you’ll waste ink restarting.
  • “Cartridge not recognized” after a refill. This model uses tanks, not cartridges, but the error can still appear if the refill wasn’t registered. Open the Epson Scan 2 Utility or the printer’s control panel, find the Reset Ink Levels option, and confirm you refilled each tank. The firmware tracks ink by estimate, not by sensor, so it needs to know you refilled.
  • Blank pages after refill. If pages come out blank right after a refill, the print head nozzles may have dried during the empty period. Run a head cleaning from the printer’s maintenance menu, then a nozzle check pattern. Two or three cleaning cycles usually bring the nozzles back.
  • Don’t mix 522 and 502 bottles. If you had an older ET-2760, ET-2850, or ET-3760, those use 502 bottles and are NOT compatible with the ET-4800. Epson changed the bottle keying between generations, so the wrong bottle won’t fit the tank opening.

Known issues with the EcoTank ET-4800

  • Wi-Fi is 2.4 GHz only. The ET-4800 does not support 5 GHz Wi-Fi. On dual-band routers with a single SSID and band steering, the printer may fail to join the network during setup. Connect the PC to the 2.4 GHz band during the Wi-Fi install step, or use the Ethernet port instead.
  • Model is “Out of Stock” on Epson’s US site. Epson lists the ET-4800 as Out of Stock, with the ET-4850 as a newer alternative. Drivers are still available, but new firmware past XD03L8 is unlikely. I recommend downloading and archiving the driver packages you need from this page in case Epson pulls them later.
  • Single-sided ADF scanning. The 30-sheet ADF handles one side per pass. For two-sided originals, flip the stack manually or step up to a model with duplex ADF.
  • Combo Package needs internet during install. The 13 MB Combo Package is a bootstrap that downloads the full driver files from Epson during setup. If the install PC has no internet or a strict proxy, use the standalone Printer Driver, Scanner Driver, and Remote Print Driver packages above instead.
  • Vista and XP coverage is limited. On Windows, Vista is supported only through the Combo Package and the Remote Print Driver, not the standalone Printer Driver. Windows XP is supported only through the Remote Print Driver. If you’re on Vista or XP, read the Driver files OS compatibility carefully before picking a package.

How to fully uninstall the EcoTank ET-4800 driver

On Windows:

  1. Open Settings > Printers & scanners, click the EPSON ET-4800 Series entry, and pick Remove.
  2. Open Control Panel > Programs and Features.
  3. Uninstall every Epson ET-4800 entry you find (“EPSON Printer Software”, “Epson Scan 2”, “Epson Software Updater”, “Epson Remote Print Driver”, “Epson FAX Utility”).
  4. Reboot. This clears the driver out of the Windows Driver Store so the next install starts fresh.

On macOS, open System Settings > Printers & Scanners, select the ET-4800, click the minus button, then delete the Epson driver packages from /Library/Printers/EPSON if you want a complete removal.

Epson EcoTank ET-4800 at a glance

Spec Value
Type Wireless EcoTank all-in-one inkjet with ADF, fax, and Ethernet (print, scan, copy, fax)
SKU C11CJ65201 (US)
Print technology PrecisionCore MicroPiezo 4-color (CMYK) drop-on-demand inkjet, Heat-Free Technology
Print resolution Up to 5,760 x 1,440 dpi
Scanner Color flatbed with 30-sheet ADF (single-sided scan)
Fax Yes, built-in with Contact List and Broadcast fax
Ink Epson 522 bottles: Black, Cyan, Magenta, Yellow (65 mL each)
Ink yield (replacement bottles, AU methodology) Black 4,500 pages; Color 7,500 pages per color
Connectivity Wi-Fi 2.4 GHz, Ethernet RJ-45, Hi-Speed USB 2.0
Mobile printing AirPrint, Mopria Print Service, Epson Smart Panel app
Chromebook Supported through CUPS
Paper tray 100-sheet tray
Supported OS Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit; Vista via Combo Package and Remote Print Driver only); Windows XP via Remote Print Driver; macOS Sequoia 15 through Mac OS X Snow Leopard 10.6
Warranty 2-year limited (U.S. and Canada), 2nd year requires product registration
Weight Approximately 5 kg (11 lbs)

Frequently Asked Questions

Where can I download the Epson EcoTank ET-4800 driver and software?

Right here on this page. Scroll up to the Driver files section and pick the Drivers and Utilities Combo Package for Windows or the macOS Combo Package. Every file is sourced directly from Epson’s official release, with no signup walls or bundled toolbars, and the downloads are free. Since the ET-4800 is Out of Stock on Epson’s site, I recommend saving a copy of the installer you need in case Epson changes the download later.

How do I connect my Epson ET-4800 to my computer?

Download the Drivers and Utilities Combo Package above, run it as administrator, and follow the prompts. The installer asks whether you want USB, Wi-Fi, or Ethernet. For USB, plug the cable in when prompted. For Wi-Fi, pick your network name from the list the installer shows and enter the password. For Ethernet, plug the cable in and pick Ethernet when the installer asks. The full walkthrough is in the Install section above.

How do I update the firmware on my Epson ET-4800?

Firmware updates ship through the Epson Software Updater, which installs with the Drivers and Utilities Combo Package. After install, open Epson Software Updater, pick the ET-4800, and let it check for firmware updates. The ET-4800 ships with firmware around version XD03L8, depending on when the printer left the factory. Keep in mind the ET-4800 is Out of Stock on Epson’s site, so new firmware past XD03L8 is unlikely.

Does the ET-4800 work on Windows 11 and macOS Sequoia 15?

Yes to both. The Windows 11 (64-bit) driver is listed above as part of the Combo Package and the standalone 64-bit Printer Driver. For macOS Sequoia 15, use the Printer Driver for Mac OS X 10.6 through macOS 15, or the Combo Package if you also want the scanner driver and Epson utilities in one install.

Which Epson ink bottles does the ET-4800 use?

The ET-4800 uses Epson 522 bottles, one each for Black, Cyan, Magenta, and Yellow (65 mL per bottle). This is the same series as the ET-2803 and ET-4810, and a different series from the older 502 bottles used by ET-2760, ET-2850, and ET-3760. Leftover 502 bottles are not compatible with the ET-4800. I recommend sticking with Epson’s own 522 originals since EcoTank printers meter ink by firmware estimate rather than cartridge chip.

How do I set up fax on the ET-4800?

Plug a standard phone line cable into the LINE port on the back of the ET-4800, then open the fax setup wizard from the printer’s control panel. The wizard walks through entering your fax number, header name, and basic dial settings. The Epson FAX Utility, installed with the Combo Package, lets you send faxes from the PC too. Both Windows and macOS have the FAX Utility bundled.

How do I uninstall the ET-4800 driver on Windows?

Four steps: remove the printer entry in Settings > Printers & scanners, uninstall every “EPSON Printer Software”, “Epson Scan 2”, “Epson FAX Utility”, or “Epson Software Updater” entry from Control Panel > Programs and Features, reboot, and clear residual files in C:\\ProgramData\\EPSON if any remain. The reboot clears the driver from the Windows Driver Store.