If you’ve plugged in your Epson ET-3760 and nothing’s happening on Windows, or the Wi-Fi setup keeps timing out, you’re hitting the two most common snags on this Supertank. First, the Drivers and Utilities Combo Package is a small bootstrap installer that pulls the real driver files from Epson during setup, and a dropped connection breaks it. Second, the printer uses 2.4 GHz Wi-Fi only, which trips up dual-band router setups with band steering turned on. The driver and software downloads are below, followed by the install walkthrough and the EcoTank-specific tips that catch the quirks worth knowing on this model.
🖥️Supported Operating Systems
![]()
![]()
Which driver do I need for the EcoTank ET-3760?
The ET-3760 ships with a short driver list compared to other EcoTank models. On Windows, the Drivers and Utilities Combo Package covers print, scan, and Epson utilities in one bootstrap installer. The Remote Print Driver is a separate download for printing from apps that target this printer as a remote network device.
On macOS, the pattern is the same: one Combo Package for the main install, and a Remote Print Driver as a standalone option.
For most users, the Combo Package on your platform is the one to grab. It’s a small 11-13 MB installer that downloads the full driver set from Epson during the first run, so you need an active internet connection while it installs.
Epson EcoTank ET-3760 Drivers for Windows
Epson EcoTank ET-3760 Drivers for macOS
Before you install
- Run the installer as administrator on Windows (right-click the downloaded file and pick Run as administrator). On macOS, your account needs to be able to install signed drivers, and you may see a system prompt asking you to approve the Epson installer during the first run.
- Close any open print dialogs, scan apps, or image editors before you start. The installer registers printer and scanner components, and an open app holding one of those can stall the setup.
- Make sure the PC has an active internet connection. The 11-13 MB Combo Package is a bootstrap that downloads the real driver files from Epson during setup.
- Have the printer powered on and the ink tanks filled before you run the installer. If this is a first-time setup, follow the printed quick-start guide to fill all four tanks with the Epson 502 starter bottles before touching the computer side of the install.
- Decide how you want to connect. The ET-3760 supports USB, Wi-Fi, and Ethernet. For Wi-Fi, have your network name and password handy. For Ethernet, plug the cable in and the printer gets an IP from your router automatically.
Install the EcoTank ET-3760 driver step by step
- Click the download link next to the Drivers and Utilities Combo Package card above. Your browser saves the installer to your Downloads folder.
- Right-click the file and pick Run as administrator. If Windows asks about letting the app make changes, say yes.
- Follow the on-screen prompts for connection type. The ET-3760 install flow asks whether you want USB, Wi-Fi, or Ethernet. Pick the one you prepared in the previous section.
- Let the installer finish. The Combo Package downloads the printer driver, scanner driver, and Epson utilities one after the other, so most of the real install time happens during this step.
- Print a test page from Windows Settings > Printers & scanners > EPSON ET-3760 Series > Printer properties > Print Test Page.
Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.
What to check after install
- Open Settings > Printers & scanners. The EPSON ET-3760 Series entry should show as Ready or with a neutral status, not offline.
- Set the ET-3760 as the default printer if that’s how you want it. Turn off “Let Windows manage my default printer” so Windows doesn’t swap it for the last-used printer.
- Check that the scanner shows up in Settings > Devices and in the Epson Scan 2 Utility. The Combo Package installs both halves; if only print is working, the scanner piece didn’t register.
- Try a scan through the 30-sheet ADF, not just the flatbed. The ADF is the main reason to pick the ET-3760 over the ET-2760, so it’s worth confirming it works end-to-end before you walk away.
- Print a test page and run a one-page scan through Epson Scan 2. Both halves need to work on this all-in-one before the install is done.
Print from your phone or Chromebook
The ET-3760 works with AirPrint on iPhone and iPad, Mopria Print Service on Android, and the Epson Smart Panel app on both. For AirPrint and Mopria, the phone and the printer have to be on the same network. If the printer is on Ethernet and your phone is on Wi-Fi, they still need to be on the same subnet — most home routers handle that automatically, but corporate networks with separate VLANs can block discovery.
Chromebook users can add the ET-3760 through Settings > Advanced > Printing > Printers > Add Printer. Chrome OS discovers it over the network through CUPS.
If install fails
- Combo Package installer stalls at the component-download step. The 13 MB Combo Package is a bootstrap that pulls the real driver files from Epson during setup. If your internet connection drops mid-download or a proxy blocks the second-stage fetch, the installer hangs. Rerun as administrator with a stable connection. Since the ET-3760 is discontinued, keep a copy of the installer on hand in case Epson changes the download later.
- Previous Epson driver stuck in Windows. Open Settings > Printers & scanners, remove any older ET-3760 or EPSON ET series entries, open Control Panel > Programs and Features, uninstall any “EPSON Printer Software” entries, reboot, then rerun the installer.
- USB connection not detected. Try a different USB port on the PC (prefer a direct port over a hub), swap the USB cable, and confirm the printer is powered on with the 2.4 inch LCD lit before clicking Next in the installer.
- Wi-Fi install can’t find the printer. The ET-3760 is 2.4 GHz only. If your router broadcasts a single SSID for both 2.4 and 5 GHz and uses band steering, your PC may be on 5 GHz while the printer sits on 2.4 GHz, and discovery fails silently. Connect the PC to the 2.4 GHz band directly during setup, or temporarily disable 5 GHz on the router. The Ethernet alternative sidesteps this entirely if you can run a cable.
- Ethernet setup doesn’t pick up the printer. Plug the Ethernet cable into both the printer and the router, power-cycle the printer, and wait for the LCD to show a network icon. The printer pulls an IP from DHCP automatically. During install, pick Ethernet (not Wi-Fi) when the installer asks.
- Driver installs but printer shows offline. Open Settings > Printers & scanners, open the ET-3760 entry, and uncheck Use printer offline. If it flips back on its own, the printer’s network connection dropped. Reconnect from the printer’s control panel.
- Installer closes silently or hangs on Windows 11. Right-click the installer, open Properties, go to the Compatibility tab, and check Run this program in compatibility mode for. Try Windows 8 first since this driver supports Windows 10 natively. Save and run as administrator.
- Admin rights error. Make sure the installer runs as administrator (right-click > Run as administrator). On a standard user account, you’ll need an admin password at the UAC prompt.
If the scanner doesn’t work after install
- Scanner driver missing. The Combo Package installs print and scan together. If the scanner piece didn’t register, rerun the Combo Package installer.
- Epson Scan 2 Utility won’t launch. The utility depends on the scanner driver install. Reinstall the Combo Package, and the utility registers during setup.
- WIA entry missing in Windows Scan. Reboot once after install. Windows registers WIA (Windows Image Acquisition) scanners during startup, and the first login after a fresh install sometimes needs the reboot to pick it up.
- ADF won’t feed pages. The 30-sheet ADF has its own pickup mechanism. If pages jam or feed crookedly, check that the paper guides are flush against the stack, the paper is below the max line, and the pages aren’t curled or stuck together. The ADF handles single-sided scanning only. Epson confirmed on the Best Buy Q&A page that the ET-3760 does two-sided printing but scans one side per pass.
- Scanner works in Epson Scan 2 but not in Windows Scan. Some third-party scan apps on Windows only read WIA, not Epson’s TWAIN interface. Use Epson Scan 2 as the primary scan application, or switch to NAPS2 which handles both.
Ink refill and tank issues
The ET-3760 uses Epson 502 ink bottles. The starter set in the box is a 127 mL black bottle and 70 mL bottles of cyan, magenta, and yellow. Epson’s published yields are 7,500 pages from the black bottle and 6,000 pages per color bottle, which translates to about two years of ink for typical home use.
- Initial fill takes time on first setup. After you pour all four bottles into the tanks, the printer charges the ink system through its own primers. Don’t interrupt power during this charge or you’ll waste ink restarting. The 2.4 inch LCD shows prime-in-progress status.
- “Cartridge not recognized” after a refill. This model uses tanks, not cartridges, but the error can still appear if the refill wasn’t registered. Open the Epson Scan 2 Utility or the printer’s control panel, find the Reset Ink Levels option, and confirm you refilled each tank. The firmware tracks ink by estimate, not by sensor, so it needs to know you refilled.
- Blank pages after refill. If pages come out blank right after a refill, the print head nozzles may have dried during the empty period. Run a head cleaning from the printer’s maintenance menu, then a nozzle check pattern. Two or three cleaning cycles usually bring the nozzles back. The ET-3760 has permanent printheads, confirmed by Epson on the Best Buy Q&A page, so repeated cleaning cycles won’t exhaust a replaceable head.
- 502 bottle compatibility. The ET-3760 uses the 502 series, same as the ET-2760 and ET-2850. If you have leftover bottles from either model, they work on the ET-3760. The newer 522 bottles used by the ET-2803 are a different keying and don’t fit.
Known issues with the EcoTank ET-3760
- Wi-Fi is 2.4 GHz only. The ET-3760 does not support 5 GHz Wi-Fi. If your router runs a single SSID for both bands with band steering, the printer may fail to join during Wi-Fi setup. Either connect to the 2.4 GHz band directly during setup or use the Ethernet port, which sidesteps the Wi-Fi band question entirely.
- Model is discontinued on Epson’s site. Epson lists the ET-3760 as Discontinued and points to the ET-3850 as its replacement in the Supertank business line. Drivers are still available, but new firmware past LV12J7 is unlikely. I recommend downloading and archiving the driver packages you need from this page in case Epson pulls them later.
- Scanner is single-sided only. The ADF does not do duplex scanning. The printer does duplex printing, but the scanner handles one side per pass. For two-sided originals, flip the pages manually or step up to the ET-3850 or ET-4760 which have duplex ADF.
- Permanent printheads. The ET-3760 uses permanent printheads that are not user-replaceable. Epson confirmed this directly on the Best Buy Q&A page for the ET-3760. If the printhead eventually fails, the printer is at end of serviceable life.
- Combo Package needs internet during install. The 11-13 MB Combo Package is a bootstrap that downloads the full driver files from Epson during setup. If the install PC has no internet or a strict proxy, the install will stall. Have a stable connection ready for the install step.
How to fully uninstall the EcoTank ET-3760 driver
On Windows:
- Open Settings > Printers & scanners, click the EPSON ET-3760 Series entry, and pick Remove.
- Open Control Panel > Programs and Features.
- Uninstall every Epson ET-3760 entry you find (“EPSON Printer Software”, “Epson Scan 2”, “Epson Software Updater”, “Epson Remote Print Driver”).
- Reboot. This clears the driver out of the Windows Driver Store so the next install starts fresh.
On macOS, open System Settings > Printers & Scanners, select the ET-3760, click the minus button, then delete the Epson driver packages from /Library/Printers/EPSON if you want a complete removal.
Epson EcoTank ET-3760 at a glance
| Spec | Value |
|---|---|
| Type | Wireless EcoTank all-in-one inkjet with ADF (print, scan, copy) |
| Release year | 2019 (discontinued on Epson’s site, drivers still available) |
| SKU | C11CG20203 |
| Print technology | PrecisionCore MicroPiezo 4-color (CMYK) drop-on-demand inkjet |
| Print speed | 15 ISO ppm black / 8.0 ISO ppm color |
| Print resolution | Up to 4800 x 1200 optimized dpi |
| Scan resolution | 2400 x 1200 dpi |
| Scanner type | Color flatbed with 30-sheet ADF (single-sided scan) |
| Duplex printing | Automatic 2-sided printing |
| Ink | Epson 502 bottles: Black 127 mL (yield 7,500 pages), Cyan/Magenta/Yellow 70 mL each (yield 6,000 pages per color) |
| Printheads | Permanent, not user-replaceable |
| Paper tray | 250-sheet front tray |
| Connectivity | Wi-Fi 802.11b/g/n (2.4 GHz), Wi-Fi Direct, Gigabit Ethernet (RJ-45), Hi-Speed USB 2.0 |
| Mobile printing | AirPrint, Mopria Print Service, Epson Smart Panel, Fire OS printing |
| Chromebook | Supported through CUPS |
| Display | 2.4 inch color LCD |
| Supported OS | Windows (32-bit and 64-bit); macOS |
| Warranty | 2-year limited (U.S. and Canada), 2nd year requires product registration |
| Country of origin | Philippines |
| Weight | 16.1 lbs |
Frequently Asked Questions
Where can I download the Epson EcoTank ET-3760 driver and software?
Right here on this page. Scroll up to the Driver files section and pick the Drivers and Utilities Combo Package for Windows or the Combo Package for macOS. Every file is sourced directly from Epson’s official release, with no signup walls or bundled toolbars, and the downloads are free. Since the ET-3760 is discontinued on Epson’s site, I recommend saving a copy of the installer you need in case Epson changes the download later.
My Epson ET-3760 isn’t scanning. How do I fix it?
Three steps: open the Epson Scan 2 Utility and confirm the ET-3760 is listed as a scanner source. If it’s missing, reinstall the Combo Package, which registers both print and scan drivers together. Reboot after the reinstall so Windows registers the WIA scanner entry. If the scanner works in Epson Scan 2 but not in Windows Scan or a third-party app, that app probably only reads WIA while Epson Scan 2 uses TWAIN. Use Epson Scan 2 as the primary scan app, or install NAPS2 which handles both.
How do I update the driver for my Epson ET-3760?
Driver updates for the ET-3760 ship through the Epson Software Updater, which installs with the Combo Package. Open Epson Software Updater, pick the ET-3760, and let it check for updates. Since the ET-3760 is discontinued on Epson’s site, don’t expect frequent driver changes anymore; the firmware version at last widely-tested release was LV12J7. If you need to reinstall the driver fresh, download the Combo Package from the Driver files section above.
Does the ET-3760 work on Windows 11 and current macOS?
Yes to both. The Drivers and Utilities Combo Package for Windows covers 32-bit and 64-bit installs, and the macOS Combo Package covers the Mac side. If the installer stalls on Windows 11 specifically, try right-click Properties > Compatibility tab and run in Windows 8 compatibility mode first.
Which Epson ink bottles does the ET-3760 use?
The ET-3760 uses Epson 502 bottles, same as the ET-2760 and ET-2850. The black bottle is 127 mL with a 7,500-page yield, and cyan, magenta, and yellow are 70 mL each with a 6,000-page yield per color. If you have leftover 502 bottles from an ET-2760 or ET-2850, they fit the ET-3760. Don’t try 522 bottles (used by the newer ET-2803); they’re a different keying.
How do I connect the ET-3760 to Wi-Fi?
Download the Combo Package above and run it as administrator. The installer walks through Wi-Fi setup: pick your network name from the list the installer shows and enter the password. One catch worth knowing up front — the ET-3760 only supports 2.4 GHz Wi-Fi. On dual-band routers with a single SSID and band steering, your PC may try to add the printer through the 5 GHz band and discovery will fail. Connect the PC to the 2.4 GHz band for the setup step, then switch back after. The printer’s Ethernet port is an easier alternative if you can run a cable.
How do I uninstall the ET-3760 driver on Windows?
Four steps: remove the printer entry in Settings > Printers & scanners, uninstall every “EPSON Printer Software” or “Epson Scan 2” entry from Control Panel > Programs and Features, reboot, and clear residual files in C:\\ProgramData\\EPSON if any remain. The reboot clears the driver from the Windows Driver Store so a fresh install won’t reuse old files.
