Epson EcoTank ET-2760 Driver Download

The EcoTank ET-2760 has been around since 2019, which means two things for driver install today. First, the driver matrix covers an unusually wide operating-system range: Windows 11 all the way back to Windows XP through a separate Remote Print package, and macOS Sonoma 14 back to Mac OS X Leopard 10.5 through separate installers per era. Second, the refillable ink tank setup takes about 15 minutes on first use for initial ink distribution, which Epson walks you through in the first-run setup rather than letting you skip straight to a test print. The driver and software downloads are below, followed by the install walkthrough and the EcoTank-specific quirks that trip people up more often than the driver itself.

🖥️Supported Operating Systems
Windows

Windows11 (64-bit), 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit)
macOS

macOSSonoma 14 through Mac OS X Leopard 10.5

Which driver do I need for the EcoTank ET-2760?

Windows has three practical options for this printer, picked by what you want to do with it. The Drivers and Utilities Combo Package is the small all-in-one installer (12 MB) that pulls down the printer driver, scanner driver, and Epson’s maintenance utilities during the first run. If you prefer to handle each component separately, the standalone Printer Driver is a larger 38-43 MB package, the Scanner Driver and Epson Scan 2 Utility bundle is around 63 MB, and the Remote Print Driver covers printing from an app that targets a remote network printer.

Windows 11 is 64-bit only. Windows 10, 8.1, 8, 7, and Vista each have 32-bit and 64-bit builds, and the driver list has a package for each architecture. Windows XP is supported only through the Remote Print Driver, not the main Printer Driver.

On macOS, the Drivers and Utilities Combo Package is the easiest entry for Catalina 10.15 through Ventura 13. For older Macs running Mac OS X 10.7 through macOS Mojave 10.14, there’s a separate Combo Package installer. Individual Printer Driver, Scanner Driver, and Remote Print Driver packages cover Mac OS X 10.6 Snow Leopard through macOS Sonoma 14, and a dedicated Remote Print Driver covers Mac OS X Leopard 10.5 for the oldest Macs still around.

Epson EcoTank ET-2760 Drivers for Windows

Printer Driver (64-bit)

Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (64-bit). Printer driver package.

43.42 MBDownload

Printer Driver (32-bit)

Windows 10, 8.1, 8, 7, Vista (32-bit). Printer driver package.

38.96 MBDownload

Scanner Driver and Epson Scan 2

Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit). Scanner driver with the Epson Scan 2 utility.

63.6 MBDownload

Remote Print Driver (64-bit)

Windows 11 (64-bit), 10, 8.1, 8, 7, Vista, XP (64-bit). Driver for apps that target a remote network printer.

10.17 MBDownload

Remote Print Driver (32-bit)

Windows 10, 8.1, 8, 7, Vista, XP (32-bit). Driver for apps that target a remote network printer.

9.42 MBDownload

Epson EcoTank ET-2760 Drivers for macOS

Combo Package (Mac OS X 10.7-10.14)

Mac OS X Lion 10.7 through macOS Mojave 10.14. Full install package with printer driver, scanner driver, and Epson utilities.

10.14 MBDownload

Printer Driver (macOS 10.6 to 14)

Mac OS X Snow Leopard 10.6 through macOS Sonoma 14. Printer driver package.

78.27 MBDownload

Scanner Driver and Epson Scan 2

Mac OS X Snow Leopard 10.6 through macOS Sonoma 14. Scanner driver with the Epson Scan 2 utility.

46.53 MBDownload

Remote Print Driver (macOS 10.6 to 14)

Mac OS X Snow Leopard 10.6 through macOS Sonoma 14. Driver for apps that target a remote network printer.

26.03 MBDownload

Remote Print Driver (Leopard)

Mac OS X Leopard 10.5 only. Driver for apps that target a remote network printer.

25.31 MBDownload

Before you install

  • Run the installer as administrator on Windows (right-click the downloaded file and pick Run as administrator). On macOS, your account needs to be able to install signed drivers, and you may see a system prompt asking you to approve the Epson installer during the first run.
  • Close any open print dialogs, scan apps, or image editors before you start. The installer registers printer and scanner components, and an open app holding one of those can stall the setup.
  • Have the printer powered on and the ink tanks filled before you run the installer. If this is a first-time setup, follow the printed quick-start guide to fill all four tanks with the Epson 502 starter bottles before touching the computer side of the install.
  • Remove any older Epson ET-2760 entries from Windows Settings > Printers & scanners first. An orphan entry from an earlier install can confuse the setup.
  • Decide between USB and Wi-Fi setup. For Wi-Fi, have your network name and password handy and keep the printer close to the router during the first run.

Install the EcoTank ET-2760 driver step by step

  1. Click the download link next to the Drivers and Utilities Combo Package card above. Your browser saves the installer to your Downloads folder.
  2. Right-click the file and pick Run as administrator. If Windows asks about letting the app make changes, say yes.
  3. Follow the on-screen prompts for connection type. For USB, plug the cable into a direct port on the PC when the installer asks. For Wi-Fi, pick your network name from the list and enter the password.
  4. Let the installer finish. The Combo Package downloads the printer driver, scanner driver, and Epson utilities one after the other, so the real driver footprint lands during this step rather than up front.
  5. Print a test page from Windows Settings > Printers & scanners > EPSON ET-2760 Series > Printer properties > Print Test Page.

Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.

What to check after install

  • Open Settings > Printers & scanners. The EPSON ET-2760 Series entry should show as Ready or with a neutral status, not offline.
  • Set the ET-2760 as the default printer if that’s how you want it. Turn off “Let Windows manage my default printer” so Windows doesn’t swap it for the last-used printer.
  • Check that the scanner shows up in Settings > Devices and in the Epson Scan 2 Utility. The Combo Package installs both halves; if only print is working, the scanner piece didn’t register.
  • Print a test page and run a one-page scan through Epson Scan 2. Both halves need to work end-to-end on this all-in-one before you walk away.

Print from your phone or Chromebook

The ET-2760 works with AirPrint on iPhone and iPad, Mopria Print Service on Android, and the Epson Smart Panel app on both. The printer also supports voice-activated printing through Amazon Alexa once you register it with Epson Connect. For AirPrint and Mopria, the phone and the printer have to be on the same Wi-Fi network and the same 2.4 GHz band. If AirPrint doesn’t find the printer, check that your router isn’t using client isolation, which blocks devices on the same Wi-Fi from seeing each other.

Chromebook users can add the ET-2760 through Settings > Advanced > Printing > Printers > Add Printer. Chrome OS discovers it over the network through CUPS.

If install fails

  • Installer stalls at the component-download step. The Combo Package is a small 12 MB bootstrap that pulls the real driver files from Epson during setup. If your internet connection drops mid-download or a proxy blocks the second-stage fetch, the installer hangs. Rerun as administrator with a stable connection, or download the standalone Printer Driver and Scanner Driver packages above as a fallback that doesn’t need the online fetch.
  • Previous Epson driver stuck in Windows. Open Settings > Printers & scanners, remove any older ET-2760 or EPSON ET series entries, open Control Panel > Programs and Features, uninstall any “EPSON Printer Software” entries, reboot, then rerun the installer.
  • USB connection not detected. Try a different USB port on the PC (prefer a direct port over a hub), swap the USB cable, and confirm the printer is powered on with the 1.44 inch LCD lit before clicking Next in the installer.
  • Wi-Fi install can’t find the printer. The ET-2760 is 2.4 GHz only. If your router broadcasts a single SSID for both 2.4 and 5 GHz and uses band steering, your PC may be on 5 GHz while the printer sits on 2.4 GHz, and discovery fails silently. Either connect the PC to the 2.4 GHz band directly during setup, or temporarily disable 5 GHz on the router.
  • Driver installs but printer shows offline. Open Settings > Printers & scanners, open the ET-2760 entry, and uncheck Use printer offline. If it flips back on its own, the printer’s Wi-Fi connection dropped. Reconnect from the printer’s control panel.
  • Installer closes silently or hangs on Windows 11. Right-click the installer, open Properties, go to the Compatibility tab, and check Run this program in compatibility mode for. Try Windows 8 first since this driver supports Windows 10 natively. Save and run as administrator.
  • Admin rights error. Make sure the installer runs as administrator (right-click > Run as administrator). On a standard user account, you’ll need an admin password at the UAC prompt.

If the scanner doesn’t work after install

  • Scanner driver missing. If you installed the standalone Printer Driver instead of the Combo Package, the scanner piece wasn’t included. Run the Scanner Driver and Epson Scan 2 Utility installer above to add it.
  • Epson Scan 2 Utility won’t launch. The utility depends on the scanner driver install. Reinstall the Scanner Driver and Epson Scan 2 package, and the utility registers during setup.
  • WIA entry missing in Windows Scan. Reboot once after the scanner driver install. Windows registers WIA (Windows Image Acquisition) scanners during startup, and the first login after a fresh install sometimes needs the reboot to pick it up.
  • Scanner works in Epson Scan 2 but not in Windows Scan. Some third-party scan apps on Windows only read WIA, not Epson’s TWAIN interface. Use Epson Scan 2 as the primary scan application, or switch to NAPS2 which handles both.

Ink refill and tank issues

The ET-2760 uses Epson 502 ink bottles. The starter set in the box is a full-size 127 mL black bottle and 70 mL bottles of cyan, magenta, and yellow. Epson’s published yields are 7,500 pages from the black bottle and 6,000 pages per color bottle. In practice this translates to about two years of ink for typical home use.

  • Initial fill takes about 15 minutes. On first setup, after you pour all four bottles into the tanks, the printer charges the ink system through its own primers. Don’t interrupt power during this charge or you’ll waste ink restarting. The 1.44 inch LCD counts down or shows a prime-in-progress indicator.
  • “Cartridge not recognized” after a refill. This model uses tanks, not cartridges, but the error can still appear if the refill wasn’t registered. Open the Epson Scan 2 Utility or the Epson control panel, find the Reset Ink Levels option, and confirm you refilled each tank. The firmware tracks ink by estimate, not by sensor, so it needs to know you refilled.
  • Blank pages after refill. If pages come out blank right after a refill, the print head nozzles may have dried during the empty period. Run a head cleaning from the printer’s maintenance menu, then a nozzle check pattern. Two or three cleaning cycles usually bring the nozzles back.
  • Ink level reset after a manual top-up. If you refilled before the low-ink warning, the firmware’s ink estimate will be off. The reset option on the control panel syncs the estimate to a full tank state so the warning timing stays accurate.

Known issues with the EcoTank ET-2760

  • Wi-Fi is 2.4 GHz only. The ET-2760 does not support 5 GHz. Dual-band routers with a single SSID and band steering can keep the printer off the network during setup. The fix is to connect the PC to the 2.4 GHz band during the Wi-Fi install step.
  • Model is discontinued on Epson’s site. Epson lists the ET-2760 as discontinued and sells the ET-2800 as its replacement. Drivers for the ET-2760 are still available, but Epson is unlikely to ship new firmware or a macOS-15 update for this model. I recommend downloading and archiving the driver packages you need from this page in case Epson pulls them later.
  • No ADF, flatbed only. The scanner is a flatbed, so multi-page documents have to be scanned one page at a time. If you need an ADF, the EcoTank ET-3760 or ET-4760 are the sibling models with one.
  • No Ethernet port. The ET-2760 connects over USB or Wi-Fi only. Office setups that run wired Ethernet throughout will need either Wi-Fi or a direct USB connection to one PC.
  • Combo Package needs online during install. The 12 MB Combo Package is a bootstrap that downloads the full driver files from Epson during setup. If the install PC has no internet or a strict proxy, use the standalone Printer Driver and Scanner Driver packages above instead.

How to fully uninstall the EcoTank ET-2760 driver

On Windows:

  1. Open Settings > Printers & scanners, click the EPSON ET-2760 Series entry, and pick Remove.
  2. Open Control Panel > Programs and Features.
  3. Uninstall every Epson ET-2760 entry you find (“EPSON Printer Software”, “Epson Scan 2”, “Epson Software Updater”, “Epson Remote Print Driver”).
  4. Reboot. This clears the driver out of the Windows Driver Store so the next install starts fresh.

On macOS, open System Settings > Printers & Scanners, select the ET-2760, click the minus button, then delete the Epson driver packages from /Library/Printers/EPSON if you want a complete removal.

Epson EcoTank ET-2760 at a glance

Spec Value
Type Wireless EcoTank all-in-one inkjet (print, scan, copy)
Release year 2019 (discontinued on Epson’s site, drivers still available)
Print speed 10.5 ppm ISO black / 5.0 ppm ISO color
Print resolution Up to 5760 x 1440 dpi
Scan resolution Up to 1200 x 2400 dpi hardware
Duplex Automatic 2-sided printing
Ink Epson 502 bottles: Black 127 mL (yield 7,500 pages), Cyan/Magenta/Yellow 70 mL each (yield 6,000 pages per color)
Connectivity Wi-Fi 2.4 GHz, Wi-Fi Direct, Hi-Speed USB 2.0 (no Ethernet)
Mobile printing AirPrint, Mopria Print Service, Epson Smart Panel, Amazon Alexa voice printing
Chromebook Supported through CUPS
Display 1.44 inch color LCD with push-button navigation
Paper tray 100-sheet rear tray; borderless 4 x 6, 5 x 7 photos; Letter and Legal supported
ADF / Fax None (flatbed scanner only, no fax)
Supported OS Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit); Windows XP via Remote Print Driver; macOS Sonoma 14 through Mac OS X Leopard 10.5
Warranty 2-year limited with registration

Frequently Asked Questions

Where can I download the Epson EcoTank ET-2760 driver for free?

Right here on this page. Scroll up to the Driver files section and pick the Drivers and Utilities Combo Package for Windows or the matching Combo Package for your macOS version. Every file is sourced directly from Epson’s official release, with no signup walls or bundled toolbars, and the downloads are free.

How do I install the ET-2760 driver and connect it to my computer?

Download the Drivers and Utilities Combo Package above, run it as administrator, and follow the prompts. The installer asks whether you want USB or Wi-Fi setup. For USB, plug the cable in when prompted. For Wi-Fi, pick your network name from the list the installer shows and enter the password. The full walkthrough is in the Install section above.

Why isn’t my Epson ET-2760 connecting to Wi-Fi?

The ET-2760 only works on 2.4 GHz Wi-Fi. If your router broadcasts a single SSID for both 2.4 and 5 GHz, band steering can keep the printer from joining the network during setup. Connect your PC to the 2.4 GHz band directly during the Wi-Fi install step, or temporarily disable the 5 GHz radio on the router until setup finishes. Also check that your router isn’t using client isolation, which blocks devices on the same Wi-Fi from seeing each other.

Does the ET-2760 work on Windows 11 and macOS Sonoma 14?

Yes. The Windows 11 (64-bit) driver is listed above as part of the Combo Package and the standalone 64-bit Printer Driver. For macOS Sonoma 14, use the Printer Driver for Mac OS X 10.6 through macOS 14, or the Combo Package for macOS 10.15-13 if you’re on Catalina through Ventura.

Which Epson 502 ink bottles does the ET-2760 use?

The ET-2760 uses the Epson 502 ink line: a 127 mL black bottle and 70 mL cyan, magenta, and yellow bottles. Epson’s published yields are 7,500 pages for black and 6,000 pages per color bottle. I recommend sticking with Epson 502 originals since EcoTank printers meter ink by firmware estimate rather than cartridge chip, and third-party bottles can throw off the ink level tracking.

Do I need the Combo Package or just the Printer Driver?

If you’ll ever scan or copy from a connected PC, go with the Combo Package. It’s a small 12 MB bootstrap that pulls down the printer driver, scanner driver, and Epson utilities together. If this PC only needs to print and the scanning workflow happens elsewhere, the standalone Printer Driver is a larger download but installs without needing an internet connection during setup.

How do I uninstall the ET-2760 driver on Windows?

Four steps: remove the printer entry in Settings > Printers & scanners, uninstall every “EPSON Printer Software” or “Epson Scan 2” entry from Control Panel > Programs and Features, reboot, and clear residual files in C:\\ProgramData\\EPSON if any remain. The reboot clears the driver from the Windows Driver Store.