The EcoTank ET-2803 driver still installs cleanly on current Windows and macOS, and the Mac side of the driver list even reaches macOS Sequoia 15 for the newest Apple silicon machines. The downloads are below. On Windows, the Drivers and Utilities Combo Package is the easiest start, with per-driver packages below it if you want to install components separately. The Mac side has a single Combo Package covering Mac OS X 10.7 through macOS Sonoma 14, plus standalone printer, scanner, and remote-print packages that go all the way to Sequoia 15.
🖥️Supported Operating Systems
![]()
![]()
Which driver do I need for the EcoTank ET-2803?
On Windows, three driver families cover the ET-2803. The Drivers and Utilities Combo Package is a small 12 MB bootstrap installer that pulls down printer, scanner, and Epson utilities together during the first run. If you prefer to handle each component separately, the standalone Printer Driver is a 30-35 MB package, the Scanner Driver and Epson Scan 2 Utility bundle is around 64 MB, and the Remote Print Driver covers printing from an app that targets a remote network printer.
Windows 11 is 64-bit only. Windows 10, 8.1, 8, 7, and Vista each have 32-bit and 64-bit builds, and the driver list has a package for each architecture. Windows XP is supported only through the Remote Print Driver, not the main Printer Driver.
On macOS, the Drivers and Utilities Combo Package covers Mac OS X Lion 10.7 through macOS Sonoma 14 в one installer. Individual Printer Driver, Scanner Driver, and Remote Print Driver packages extend the range on both ends, reaching Mac OS X Snow Leopard 10.6 at the bottom and macOS Sequoia 15 at the top.
Epson EcoTank ET-2803 Drivers for Windows
Epson EcoTank ET-2803 Drivers for macOS
Before you install
- Run the installer as administrator on Windows (right-click the downloaded file and pick Run as administrator). On macOS, your account needs to be able to install signed drivers, and you may see a system prompt asking you to approve the Epson installer during the first run.
- Close any open print dialogs, scan apps, or image editors before you start. The installer registers printer and scanner components, and an open app holding one of those can stall the setup.
- Have the printer powered on and the ink tanks filled before you run the installer. If this is a first-time setup, follow the printed quick-start guide to fill all four tanks with the Epson 522 starter bottles before touching the computer side of the install.
- Remove any older Epson ET-2803 entries from Windows Settings > Printers & scanners first. An orphan entry from an earlier install can confuse the setup.
- Decide between USB and Wi-Fi setup. For Wi-Fi, have your network name and password handy and keep the printer close to the router during the first run.
Install the EcoTank ET-2803 driver step by step
- Click the download link next to the Drivers and Utilities Combo Package card above. Your browser saves the installer to your Downloads folder.
- Right-click the file and pick Run as administrator. If Windows asks about letting the app make changes, say yes.
- Follow the on-screen prompts for connection type. For USB, plug the cable into a direct port on the PC when the installer asks. For Wi-Fi, pick your network name from the list and enter the password.
- Let the installer finish. The Combo Package downloads the printer driver, scanner driver, and Epson utilities one after the other, so the real driver footprint lands during this step.
- Print a test page from Windows Settings > Printers & scanners > EPSON ET-2803 Series > Printer properties > Print Test Page.
Installer wizards vary slightly by driver version. Follow the on-screen prompts for connection type, driver components, and test print.
What to check after install
- Open Settings > Printers & scanners. The EPSON ET-2803 Series entry should show as Ready or with a neutral status, not offline.
- Set the ET-2803 as the default printer if that’s how you want it. Turn off “Let Windows manage my default printer” so Windows doesn’t swap it for the last-used printer.
- Check that the scanner shows up in Settings > Devices and in the Epson Scan 2 Utility. The Combo Package installs both halves; if only print is working, the scanner piece didn’t register.
- Print a test page and run a one-page scan through Epson Scan 2. Both halves need to work end-to-end on this all-in-one before you walk away.
Print from your phone or Chromebook
The ET-2803 works with AirPrint on iPhone and iPad, Mopria Print Service on Android, and the Epson Smart Panel app on both. Epson’s product page specifically lists the Smart Panel app as the mobile companion for this model, which handles setup and basic maintenance from a phone. For AirPrint and Mopria, the phone and the printer have to be on the same Wi-Fi network and the same 2.4 GHz band. If AirPrint doesn’t find the printer, check that your router isn’t using client isolation, which blocks devices on the same Wi-Fi from seeing each other.
Chromebook users can add the ET-2803 through Settings > Advanced > Printing > Printers > Add Printer. Chrome OS discovers it over the network through CUPS.
If install fails
- Combo Package installer stalls at the component-download step. The 12 MB Combo Package is a bootstrap that pulls the real driver files from Epson during setup. If your internet connection drops mid-download or a proxy blocks the second-stage fetch, the installer hangs. Rerun as administrator with a stable connection, or download the standalone Printer Driver and Scanner Driver packages above as a fallback that doesn’t need the online fetch.
- Previous Epson driver stuck in Windows. Open Settings > Printers & scanners, remove any older ET-2803 or EPSON ET series entries, open Control Panel > Programs and Features, uninstall any “EPSON Printer Software” entries, reboot, then rerun the installer.
- USB connection not detected. Try a different USB port on the PC (prefer a direct port over a hub), swap the USB cable, and confirm the printer is powered on before clicking Next in the installer.
- Wi-Fi install can’t find the printer. The ET-2803 is 2.4 GHz only. If your router broadcasts a single SSID for both 2.4 and 5 GHz and uses band steering, your PC may be on 5 GHz while the printer sits on 2.4 GHz, and discovery fails silently. Either connect the PC to the 2.4 GHz band directly during setup, or temporarily disable 5 GHz on the router.
- Driver installs but printer shows offline. Open Settings > Printers & scanners, open the ET-2803 entry, and uncheck Use printer offline. If it flips back on its own, the printer’s Wi-Fi connection dropped. Reconnect from the printer’s control panel.
- Installer closes silently or hangs on Windows 11. Right-click the installer, open Properties, go to the Compatibility tab, and check Run this program in compatibility mode for. Try Windows 8 first since this driver supports Windows 10 natively. Save and run as administrator.
- Admin rights error. Make sure the installer runs as administrator (right-click > Run as administrator). On a standard user account, you’ll need an admin password at the UAC prompt.
If the scanner doesn’t work after install
- Scanner driver missing. If you installed the standalone Printer Driver instead of the Combo Package, the scanner piece wasn’t included. Run the Scanner Driver and Epson Scan 2 installer above to add it.
- Epson Scan 2 Utility won’t launch. The utility depends on the scanner driver install. Reinstall the Scanner Driver and Epson Scan 2 package, and the utility registers during setup.
- WIA entry missing in Windows Scan. Reboot once after the scanner driver install. Windows registers WIA (Windows Image Acquisition) scanners during startup, and the first login after a fresh install sometimes needs the reboot to pick it up.
- Scanner works in Epson Scan 2 but not in Windows Scan. Some third-party scan apps on Windows only read WIA, not Epson’s TWAIN interface. Use Epson Scan 2 as the primary scan application, or switch to NAPS2 which handles both.
Ink refill and tank issues
The ET-2803 uses Epson 522 ink bottles, which is a different series from the older 502 bottles that shipped with the ET-2760 generation. The starter set in the box is one 65 mL black bottle and 65 mL bottles of cyan, magenta, and yellow. The printer uses PrecisionCore MicroPiezo inkjet technology with four individual tanks.
- Initial fill takes time on first setup. After you pour all four bottles into the tanks, the printer charges the ink system through its own primers. Don’t interrupt power during this charge or you’ll waste ink restarting. The control panel indicators show prime-in-progress status.
- “Cartridge not recognized” after a refill. This model uses tanks, not cartridges, but the error can still appear if the refill wasn’t registered. Open the Epson Scan 2 Utility or the printer’s control panel, find the Reset Ink Levels option, and confirm you refilled each tank. The firmware tracks ink by estimate, not by sensor, so it needs to know you refilled.
- Blank pages after refill. If pages come out blank right after a refill, the print head nozzles may have dried during the empty period. Run a head cleaning from the printer’s maintenance menu, then a nozzle check pattern. Two or three cleaning cycles usually bring the nozzles back.
- Don’t mix 522 and 502 bottles. If you had an older ET-2760 or ET-2800 and have leftover 502 bottles, they are NOT compatible with the ET-2803. Epson changed the bottle keying between generations, and the wrong bottle won’t fit the tank opening.
Known issues with the EcoTank ET-2803
- Wi-Fi is 2.4 GHz only. The ET-2803 does not support 5 GHz. Dual-band routers with a single SSID and band steering can keep the printer off the network during setup. Connect the PC to the 2.4 GHz band during the Wi-Fi install step.
- Model is “Out of Stock” on Epson’s site. Epson lists the ET-2803 as Out of Stock and points to the ET-2850 as a replacement in the EcoTank lineup. Drivers for the ET-2803 are still available and Epson still lists the model page, but new firmware past XE07L7 is unlikely. I recommend downloading and archiving the driver packages you need from this page в case Epson pulls them later.
- Basic control panel, no color display. The ET-2803 is Epson’s “ideal basic home printer” tier, which means simpler controls than the ET-2850 above it. Setup walkthroughs rely on the Epson Smart Panel app on your phone rather than an on-printer display.
- No ADF, flatbed only. The scanner is a flatbed, so multi-page documents have to be scanned one page at a time.
- No Ethernet port. The ET-2803 connects over USB or Wi-Fi only.
- Combo Package needs internet during install. The 12 MB Combo Package is a bootstrap that downloads the full driver files from Epson during setup. If the install PC has no internet or a strict proxy, use the standalone Printer Driver and Scanner Driver packages above instead.
How to fully uninstall the EcoTank ET-2803 driver
On Windows:
- Open Settings > Printers & scanners, click the EPSON ET-2803 Series entry, and pick Remove.
- Open Control Panel > Programs and Features.
- Uninstall every Epson ET-2803 entry you find (“EPSON Printer Software”, “Epson Scan 2”, “Epson Software Updater”, “Epson Remote Print Driver”).
- Reboot. This clears the driver out of the Windows Driver Store so the next install starts fresh.
On macOS, open System Settings > Printers & Scanners, select the ET-2803, click the minus button, then delete the Epson driver packages from /Library/Printers/EPSON if you want a complete removal.
Epson EcoTank ET-2803 at a glance
| Spec | Value |
|---|---|
| Type | Wireless EcoTank all-in-one inkjet (print, scan, copy) |
| Release year | 2022 (First Available October 12, 2022; currently Out of Stock on Epson’s site, drivers still available) |
| SKU | C11CJ66203 |
| Print technology | PrecisionCore MicroPiezo 4-color (CMYK) drop-on-demand inkjet |
| Print resolution | Up to 5760 x 1440 optimized dpi |
| Scan speed | 7.7 ipm monochrome / 3.8 ipm color |
| Ink | Epson 522 bottles: Black, Cyan, Magenta, Yellow (65 mL each) |
| Connectivity | Wi-Fi 2.4 GHz, Hi-Speed USB (no Ethernet) |
| Mobile printing | AirPrint, Mopria Print Service, Epson Smart Panel app |
| Chromebook | Supported through CUPS |
| Max paper size | 8.5 x 14 inch (Legal) |
| ADF / Fax | None (flatbed scanner only, no fax) |
| Supported OS | Windows 11 (64-bit), 10, 8.1, 8, 7, Vista (32-bit and 64-bit); Windows XP via Remote Print Driver; macOS Sequoia 15 through Mac OS X Snow Leopard 10.6 |
| Warranty | 2-year limited with registration (second year requires product registration) |
| Country of origin | Philippines |
| Weight | 8.8 lbs |
Frequently Asked Questions
Where can I download the Epson EcoTank ET-2803 driver and software for free?
Right here on this page. Scroll up to the Driver files section and pick the Drivers and Utilities Combo Package for Windows or the matching Combo Package for your macOS version. Every file is sourced directly from Epson’s official release, with no signup walls or bundled toolbars, and the downloads are free.
How do I connect my Epson ET-2803 printer to my computer?
Download the Drivers and Utilities Combo Package above, run it as administrator, and follow the prompts. The installer asks whether you want USB or Wi-Fi setup. For USB, plug the cable in when prompted. For Wi-Fi, pick your network name from the list the installer shows and enter the password. The full walkthrough is in the Install section above.
How do I update the firmware on my Epson ET-2803?
Firmware updates ship through the Epson Software Updater, which installs with the Drivers and Utilities Combo Package. After install, open Epson Software Updater, pick the ET-2803, and let it check for firmware updates. The ET-2803 ships with firmware XE07L7 or later, depending on when the printer left the factory. Keep in mind the ET-2803 is marked as Out of Stock on Epson’s site, so new firmware past XE07L7 is unlikely.
Does the ET-2803 work on Windows 11 and macOS Sequoia 15?
Yes to both. The Windows 11 (64-bit) driver is listed above as part of the Combo Package and the standalone 64-bit Printer Driver. For macOS Sequoia 15, use the standalone Printer Driver and Scanner Driver packages (they reach macOS 15); the Combo Package covers Mac OS X 10.7 through macOS 14 if you’re on an older Mac.
Which Epson ink bottles does the ET-2803 use?
The ET-2803 uses Epson 522 bottles, one each for Black, Cyan, Magenta, and Yellow (65 mL per bottle). This is a different series from the older 502 bottles that shipped with the ET-2760 and ET-2800. If you’re coming from an earlier EcoTank model, leftover 502 bottles are not compatible with the ET-2803. I recommend sticking with Epson’s own 522 originals since EcoTank printers meter ink by firmware estimate rather than cartridge chip.
Do I need the Combo Package or just the Printer Driver?
If you’ll ever scan or copy from a connected PC, go with the Combo Package. It’s a small 12 MB bootstrap that pulls down the printer driver, scanner driver, and Epson utilities together. If this PC only needs to print and the scanning workflow happens elsewhere, the standalone Printer Driver is a larger download but installs without needing an internet connection during setup.
How do I uninstall the ET-2803 driver on Windows?
Four steps: remove the printer entry in Settings > Printers & scanners, uninstall every “EPSON Printer Software” or “Epson Scan 2” entry from Control Panel > Programs and Features, reboot, and clear residual files in C:\\ProgramData\\EPSON if any remain. The reboot clears the driver from the Windows Driver Store.
